Voest-Alpine Težka Polica nakup rabljenega (1.120)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Kedpfxjfdkb To Ag Uona Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) Kjdpfx Ajmhh Ansg Uena - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg Knedsguk A Hjpfx Ag Uea - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Kjdpfeguk Dkex Ag Ujna - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. Knsdpsmhh Dtofx Ag Uoa The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Knedoguk Dvspfx Ag Uea - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: dober (rabljeno), Leto izdelave: 2019, Pallet racking, Nedcon, height 2.50 – 2.70 m, beam length 3 m and 4 m, 500 kg per pallet, up to 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for complete purchase including numerous short beams and short and long upright/end frame protections / guard rails (for double and single rows)! Price for partial quantities: Frames: €45 each Beams: 2 m: €14 each 3 m: €18 each 4 m: €22 each Manufacturer: Nedcon Type: Pallet racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500 kg Number of frames: approx. 900 units Most frames come with frame protectors Frame height: 2.50 m and 2.70 m Frame depth: approx. 1.10 m Knodpfew D Ewvex Ag Uoa Beam lengths: 4 m at least 624 units (beam height e.g. 12.5 cm / bearing approx. 5 cm) 3 m at least 518 units (beam height e.g. 8.5 cm / bearing approx. 4 cm) Some 1 and 2 m beams also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 6.300 mm, višina police: 6.300 mm, dolžina opore: 2.700 mm, 90 tekočih metrov paletnih regalov proizvajalca: META / Thyssen, model: MultiPAL N z mrežnimi policami! Kodpfxjv Db Tue Ag Usna Zelo dobro ohranjeno, letno pregledano in po potrebi obnovljeno. Ponudba vključuje: 33x stojal 6,3mx100cm (višina x globina) in 240x prečk 270cm ter varnostne zatiče. Dodatno vključenih 250 pocinkanih mrežastih vložkov za 125 polic. Nosilnost polja 9t, nosilnost police 2350kg. Cena neto, DDV ni vključen. Možna dostava po Evropi prek špediterja za doplačilo.

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. Knsdpjh Izr Usfx Ag Uea K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: dober (rabljeno), Okvirji: 8860x1050x80 mm 34 kosov 3000*1050 mm 7 kosov Prečke: 1860*75*45 mm (2800 kg/polica) 352 kosov 2760*115*40 mm (2400 kg/polica) 26 kosov 2700*100*50 mm (2400 kg/polica) 22 kosov Možen je tudi nakup delnih količin. Kjdped Hbqnsfx Ag Usna Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatne opreme, z veseljem pa vam pomagamo pri načrtovanju. Priprava individualne ponudbe je za nas samoumevna. Dostava: Prosimo, povprašajte za stroške prevoza tako, da navedete vašo poštno številko, kraj in želeno količino artiklov.

Stanje: dober (rabljeno), Okvir: 6500*1050*93 mm 10.200*1100*90/100 mm Prečke: 2800*110 CE mm 2400 kg/polica 2700*80/100/120 mm 1700 kg/polica 2700/2760*80 IPE mm 2400 kg/polica 2400*80 mm 2200 kg/polica Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas kontaktirajte. Kjdpfx Aedlnk Tsg Ujna Dostava: Za stroške prevoza prosim navedite vašo poštno številko, kraj ter želeno količino artiklov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, 100 pieces wire mesh decking, 1 ton per pallet space, for pallet racking 1.20 m deep – New: Price per piece ex-works: €20 (net)! Only available for full lot purchase! Manufacturer: MantaMESH Model: MantaMESH Year: 2024 Condition: Excellent Available: Immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Load bearing capacity independent of racking beams Uniformly Distributed Load (UDL) (kg): 1000 Permissible Deflection (mm): 7.3 Structural Failure Load (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanised, hemmed support channels - SafeEDGE® on meshes and support channels - Mesh provides over 70% open area - EU Design Registration No. 002435099-0003 Specifications: - Beam type: box section 50 / box section 50 - Rack depth (mm): 1200 - Mesh depth (mm): 1202 - Mesh width (mm): 879 - Top wire spacing (mm): 25 Knedpfx Agsttv Tgs Uja - Bottom wire spacing (mm): 100 - Top wire diameter (mm): 4 - Bottom wire diameter (mm): 5 - Support channel thickness (mm): 1.2 - Number of support channels: 5 - Pre-galvanised - Weight (kg): 12.24 Front: - Bend (mm): 30 - Bend type: External - Bend direction: downwards Rear: - Bend (mm): 30 - Bend type: External - Bend direction: downwards

Stanje: dober (rabljeno), Brez okvirjev, samo prečke: Prečke 3600*110 mm 467 kos 22 EUR Prečke 3600*120 mm 432 kos 23 EUR Prečke 3600*130 mm 20 kos 24 EUR Prečke 3600*150 mm 8 kos 25 EUR Vse prečke skupaj: 18.540 EUR Kjdpfx Aspu Acfeg Uena Če potrebujete regal ali opremo v drugi sestavi ali izvedbi, nas prosimo kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema po želji, na primer: Zaščita okvirjev, vogalov in naleta, zaščite proti prebijanju, iverne plošče, rešetke, mreže za hrbtno stran, globinske palice na voljo. Dostava: Za informacijo o stroških prevoza navedite svojo poštno številko in lokacijo ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do predhodne prodaje!

Stanje: dober (rabljeno), Armes Palettenregalsystem zur Lagerung von Dokumenten. Rahmen: 9500 × 1720 mm Ksdpjwrzhmefx Ag Uona Traversen: 1540 × 70 mm 1910 × 70 mm 2270 × 70 mm Gitterrost: 730 × 1720 mm 930 × 1720 mm 1100 × 1720 mm

Stanje: dober (rabljeno), Frame: 9000*1100 mm Beams: 2700*110 mm (2400 kg per bay) If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking as well as accessories, and are happy to support you with your planning. Further accessories available, such as: Frame, corner and collision protection, push-through guards, chipboard panels, grating floors, mesh rear panels, depth bars. Shipping: Please inquire about freight costs by providing your postcode, location, and the desired quantity of items. Additional services: Kjdpfsuf Sk Uex Ag Uena Planning, racking assembly/disassembly, purchase/sale Modifications and errors in technical data, information and prices as well as prior sale reserved!

Stanje: dober (rabljeno), Frame: 7000*1050 mm 105 EUR/piece (53 pieces) Beams: 1800*100*50 mm, 2400 kg/level, 10 EUR/piece (315 pieces) If you require racking systems or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and are happy to assist you with your planning. Additional accessories such as: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decking, rear mesh panels, depth bars available. Shipping: Please inquire about freight costs, stating your postcode, location, and required quantity of articles. Further services: Knodpfsuf Snaex Ag Uea Planning, racking assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications, prices, and prior sale!

Stanje: dober (rabljeno), Hanging shelf system for pallet racks (retrofit), 200 rack compartments – used – : Price ex location: €2,950 (net, ex works) Manufacturer: Speedcell Model: Picking Racks Speedcell Storage Year of manufacture: unknown 2 units, each 2.7 m wide 2 units: Each unit comprises: 5 hanging systems per row – 4 rows in depth, total of 20 hanging shelves with 5 compartments each = 100 compartments per rack. Increases storage density by up to 60% Reduces labor costs by up to 40% Kjdpfxourya Ej Ag Ujna Condition: good Availability: immediately Location: 45731 Waltrop

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, premer struženja: 410 mm, izvrtina vretena: 54 mm, največja hitrost vrtenja: 3.000 obr/min, skupna višina: 1.800 mm, skupna dolžina: 2.200 mm, skupna širina: 1.500 mm, teža obdelovanca (maks.): 700 kg, skupna masa: 2.100 kg, For sale is a Weiler E35 lathe. The machine is in good condition and fully operational. Knodoxu Ehgjpfx Ag Uea Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Centre height: 200 mm Centre distance: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over carriage: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions: approx. 2,200 x 1,500 x 1,800 mm Weight: approx. 2,100 kg Transport and loading can be organised upon request, at an additional charge, Europe-wide. Prices exclude VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Stanje: dober (rabljeno), Included in this package: 11 x upright frames, each 700 cm x 110 cm (grey) 60 x beams, each 3600 mm (grey) 120 x safety pins This results in a racking row with 10 bays, each with 3 storage levels, providing a total of 160 pallet spaces (800 kg per pallet). Manufacturer: Bito Type: P4 Condition: used, good condition Height: 700 cm Length: approx. 1 x 37.10 m Rack depth: 110 cm Bracing: bolted Knjdpfx Ajrhkvnsg Usa Beam length: 3.60 m Compartment load: 3200 kg Bay load: 9600 kg Pallet spaces: 96 Accessories such as - Floor anchors - Connectors - Load warning signs - Impact protection barriers - Guard rails - Wire mesh decks - Rear mesh grid - Depth bars - Safety barriers and much more... Simply contact us with your inquiry!

Stanje: novo, Leto izdelave: 2024, New item, price plus VAT. 5 uprights, each 3.00m x 1.10m, PLFB 16 solid, pre-assembled 16 beams, each 2.70m PNB 0413 32 locking pins Results in a racking row with 4 bays and 2 levels + floor storage space = 27 pallet spaces Manufacturer: Stow Type: Pallet racking Condition: NEW Height: 3.00 m Length: approx. 11.30 m Rack depth: 1.10 m Bracing: bolted Beam length: 2.70 m Load per level: 3,000 kg Load per bay: 6,000 kg Pallet spaces: 27 Certification: Up to seismic zone 1 Immediately available ex stock! Shipping available upon providing delivery address Also available in large quantities at project prices! Stock item Frames from 2000-12000mm Beams 190cm - 270cm - 360cm Load per level up to 4000kg Accessories such as: Knsdpfoq I R T Rox Ag Uja Floor anchoring Connectors Load rating signs Impact protectors Guide rails Wire mesh decking Rear mesh panels Depth bars Safety barriers And much more... Just ask us for a quote!

Stanje: rabljeno, Štirje zmagajo – Ključni elementi uspeha podjetja DLK – sistemi za skladiščenje | Levelmaker® | Logistika | Rešitve PONUJAMO Knodpfx Agjtlriao Uea Dexionovo paletno regalno konstrukcijo Okvir: 3.450 mm x 800 mm x 100 mm Prečke: 3.000 mm x 150 mm x 50 mm Fiksni nosilci Varovalni zatiči Gre za rabljeno artiklo. NAČRTOVANJE Naša prodajna ekipa vam z veseljem pripravi neobvezujočo ponudbo, prilagojeno vašim željam. TRANSPORT IN MONTAŽA Z veseljem vam pomagamo pri transportu in montaži izdelka. PLAČILNI POGOJI Plačilni pogoji se dogovorijo v primeru naročila. Cena je navedena kot cena za kos/neto cena oziroma kot je navedeno v opisu izdelka (plus DDV). Seveda boste prejeli račun z navedeno vrednostjo DDV. O NAS Podjetje DLK iz Nordhorna se ukvarja s prodajo novih in rabljenih izdelkov na področju skladiščne logistike, transportnih sistemov, skladiščnih podestov, skladišč tekstila ter strojev za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive rabljenje ponudbe različnih proizvajalcev/blagovnih znamk po ugodnih cenah. Če imate kakršna koli vprašanja, nas kontaktirajte.

Stanje: rabljeno, številka stroja/vozila: 11647, Rotor knife rows: 3 Stator knife rows: 2 Rotor width: 280 mm Rotor diameter: 280 mm Knodoyr Tmgepfx Ag Uja Infeed dimensions: 300 x 300 mm

Stanje: rabljeno, številka stroja/vozila: 11634, Premer rotorja: 600 mm Kedpfx Asyr Tl Aog Uena Širina rotorja: 1000 mm 6-nožni rotor – križno-škarjast rotor 2 vrsti statorskih nožev Vstopni presečni prerez cca 650 x 100 mm Pogonski motor 75 kW Lastnosti stroja: Križno-škarjast rotor zagotavlja optimalni sprejem in porazdelitev materiala ter s tem visoko zmogljivost ob zmanjšani porabi energije. Elektrohidravlično odpiranje zgornjega dela mlina in sita. Sito je po enostranski obrabi možno zasukati za 180° in ponovno uporabiti, nastavitev rotornih nožev zunaj mlina preko nastavitvene naprave pa skrajša čas izpada stroja.

Stanje: rabljeno, številka stroja/vozila: 14064, Premer rotorja: 500 mm Širina rotorja: 840 mm Rezila rotorja: 5 Rezila statorja: 4 Vhodni prerez pribl. 840 x 500 mm Pogonski motor: 55 kW Knedpfx Ageyyrhts Uea

Stanje: rabljeno, številka stroja/vozila: 10875, 3-knife rotor 2 rows of stator knives Ksdpfxehqt Hpj Ag Uona Rotor diameter: 280 mm Rotor width: 600 mm Infeed cross-section: approx. 280 x 600 mm Weight: approx. 800 kg