Droblilna enota

Hosokawa Alpine AG Rotoplex 50/100RO

Stanje: rabljeno, Used Urschel Model 1700 Stainless Steel Comitrol Processor. Designed for the reduction of dry, liquid, or paste products. Capable of installing three types of cutting assemblies/rotors – slicing head, cutting head, or microcutting head (ONLY the microcutting head is included). The rotor is driven by a 22 kW electric motor, 2938 rpm, 50 Hz. The sealed chamber prevents the dispersion of dust, fumes, and liquids. Includes control cabinet and control panel. Overall dimensions are approximately 1300 mm length x 900 mm width x 1800 mm height, weight approx. 500 kg. Rcedpfjltluljx Anpoh

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, barva: siv, Leto izdelave: 1988, Aeroplex fluidizirano ležišče protitočni mlin 400 AFG Naprava je popolnoma funkcionalna in si jo je mogoče ogledati na kraju samem. Poskusno mletje je mogoče izvesti vnaprej, odvisno od materiala. Leta 2005 je bila naprava posodobljena; takrat je bila nadgrajena na tehtni celici. Električni nadzor: Simatic S7-300 Naprava je sestavljena iz naslednjih enot: 1. Mlin. 2. Enota za polnjenje surovin. Redpfx Asx T Ar Nsnpjch 3. Zračni filter. 4. Električna stikalna naprava.

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, skupna masa: 9.700 kg, COGEIM E.O. 2000 VAKUUMSKI SUŠILNIK Z LOPEČI – FARMAVTIČNA IZVEDBA – 2.380 L Visokokakovosten sušilnik z lopato in vakuumom, horizontalne izvedbe, proizvajalca COGEIM, Italija, v farmacevtski izvedbi. Sušilnik ima horizontalno posodo iz nerjavečega jekla, ki jo je mogoče segrevati/ohladiti, z velikim pokrovom na sprednji strani, ter robusten mešalni mehanizem z lopatami in strgali. Deli, ki so v stiku z izdelkom, so izdelani iz nerjavečega jekla 1.4435, notranje površine pa so visoko polirane. Naprava je primerna za zahtevne procese sušenja, mešanja in vakuuma v farmacevtski, kemični in finokemični industriji. TEHNIČNI PODATKI Proizvajalec: COGEIM, Italija Tip: E.O. 2000 Letnik izdelave: 1990 Projektna/referenčna številka: C.89/040 Delovni/nominalni volumen: približno 2.380 litrov Skupni volumen posode: približno 3.100 litrov Posoda: Delovni tlak: -1 / +6 bar Delovna temperatura: -20 / +165 °C Material, ki je v stiku z izdelkom: nerjaveče jeklo 1.4435 Notranje površine: visoko polirane SISTEM ZA SEGREVANJE/HLAJENJE Posoda ima zunanjo polkrožno cev, preko katere je mogoče segrevati oz. hladiti. Volumen prostora za segrevanje/hlajenje: približno 150 litrov Delovni tlak prostora za segrevanje/hlajenje: do +6 bar Material prostora za segrevanje/hlajenje: nerjaveče jeklo 1.4306 Temperaturni razpon: -20 / +165 °C MEŠALNI MEHANIZEM Robusten horizontalni mešalni mehanizem z lopatami in strgali Velikopovršinsko mešanje izdelka Tesnilo mešalne gredi z drsnim obročnim tesnilom Pogon, nameščen ob strani OPREMA / OBSEG DOBAVE Obseg dobave vključuje, med drugim: - filter za trdne delce / filter za prah - naprava za vnos - izpustni ventil - celostična zapora - kompenzator - pogon in menjalnik - pnevmatske armature in komponente Rcedpfxjr Nclae Anpoh - velik pokrov na sprednji strani - nosilna konstrukcija in podstoj - obstoječe priključne komponente - obstoječa tehnična dokumentacija - originalni načrt postavitve/priključitve Velik sprednji pokrov omogoča zelo dober dostop do notranjosti in mešalnega mehanizma za pregled, čiščenje in vzdrževanje. STANE Uporabljena naprava v delovno sposobnem stanju. Na priloženih slikah je videti, da je notranjost in mešalni mehanizem v zelo dobro ohranjenem stanju. Tehnična dokumentacija in originalni načrti so na voljo. Dodatne tehnične informacije, podrobne fotografije in izpiske iz dokumentacije so na voljo na zahtevo.

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Suitable for grinding calcined coke. Feed material diameter: 0-20 mm. Feed material moisture: below 0.1%. Measurement: NEA Malvern analysis. Includes pendulum mill, automated filling system, Big Bag discharge station, dust filter, tubular chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel platform, documentation, and additional components. The plant is still in its original packaging and has been stored for two years. Rodpsnxk Ixsfx Anpoch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CLEANROOM – ISO 8 | Requirements for Cleanroom ISO Class 8 | Cleanroom Room Classification ISO 8 | To achieve ISO 8 air cleanliness class in a Cleanroom, a multi-stage air filtration system is typically applied (e.g., G4 pre-filter, F9 filter, H13 final HEPA filter). Airflow within the room is non-unidirectional (the supplied 'clean' air mixes with 'dirty' air present in the room). Air exhaust vents in an ISO 8 room are installed in the walls. The required number of air changes per hour depends on the activities carried out and the number of personnel present, but a target could be 10–40 air changes per hour. In ISO 8 class, personnel are often present continuously. Employees may wear standard work clothing, and visitors disposable gowns. It is recommended to maintain a minimum positive room pressure relative to adjacent zones at 5–10 Pa. Requirements for equipment and materials intended for Cleanroom ISO 8 (maximum average amount of particles released, assuming 100 samples; measurement according to ISO 14644-14 in a class at least one better than required for device application; number of particles/m3). Detailed description available in photos. Technical drawings included in the images. Ventilation Description: The aim of the ventilation installation was to achieve the following air parameters in the Cleanroom. The structure was built using the GBD PHARMA 2000 system, meeting all requirements for ‘cleanrooms’ in the highest air cleanliness classes. Installation parameters: a. Air cleanliness – ISO 8. Rsdjq H H Ruspfx Anpjch b. Temperature: 19–23°C c. Maximum humidity: 38%. a. To ensure the required cleanliness of supplied air, a DOSPEL ventilation unit with a maximum capacity of V = 3500 m3/h [up to 15 air changes per hour] was used. The ventilation unit is equipped with bag filters: pre-filter FK EU5/EC2 and secondary FK-EU9/EC2. Additionally, EUFILTER HEPA 11 filters were used in the ceiling-mounted supply diffusers. Technical data sheets are attached in section H6. As a result, at a measured output of 3264 m3/h, ISO 7 [Class 'C'] room cleanliness was achieved at rest, and thus ISO 8 [Class 'D'] in operation. b. The temperature range of 19–23°C can be easily maintained with an enlarged cooler and aggregate, even with 25% fresh air intake. c. To achieve specified conditions during summer, at high ambient temperatures of around 30°C and humidity of around 80%, a 31.4 kW freon cooler and a 33.5 kW chiller were used. The chiller, made by FUJITSU, was supplied by Klimatherm Gdańsk. The room features automated positive pressure regulation compared to external pressure—differential pressure at the doors: 15 Pa. Ventilation automation allows for an 'economy' mode, where the system operates in a closed loop and maintains a pressure differential of 15 Pa. Technical data attached in the images.

Leto izdelave: 1976, stanje: pripravljen za uporabo (rabljen), Obseg finega mletja: 50µm-5mm, premer rotorja: 630mm, teža: cca. 1200kg. Ogled na lokaciji je mogoč. Rsdpsyarrkofx Anpsch

Stanje: rabljeno, Leto izdelave: 1995, Concentration plant for the juice industry. The plant was originally built in 1977 and was rebuilt in 1992. During the rebuild, it was expanded and equipped with a new cooling tower circuit. The plant is designed for 6,600 kg/h of cloudy apple juice. In single-stage concentration, the juice is thickened from 12° to 25° Brix. In the second pass, up to 71° Brix can be achieved. Machine (additional feature): Concentration plant with aroma recovery Input quantity (apple juice): 6,600 kg/h Water evaporation: 4,840 kg/h Output quantity (juice concentrate): 1,760 kg/h Steam consumption: 1,685 kg/h Rcsdjwu N T Aepfx Anpeh Length: 7.70 m Width: 6.70 m

Stanje: novo, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), Unused inline mixer from Ystral Redjvkpqhepfx Anpech Built-in frequency converter Top-quality machine

Stanje: rabljeno, Haver & Boecker SWA/MECII-20, naprava za nakladanje   Haver & Boecker SWA/MECII-20, naprava za nakladanje razsutega materiala z vgrajeno tehtnico za nakladanje tovornih vozil ali vagonov z razsutim materialom. Primerna za razsuti material, ki teče prosto in ne vsebuje prahu.   Opis Znamka: Haver & Boecker Tip: SWA/MECII-20 Leto izdelave: 2003 Temperaturni obseg: -10 °C / 40 °C Napetost: 230 V Frekvenca: 50 Hz Pnevmatični tlak: 5 bar; maks. 40 kg, min. 10 kg Dimenzije: Odsek I: D2.43 x Š187 x V310 Odsek II: D240 x Š240 x V310   Haver neto tehtnica s podstavkom Rodpfx Asg Sfa Tsnpjch Elektronika za tehtanje in izmet materiala MEC II-20 za nadzor funkcij tehtanja in/ali stroja   Prednosti • visoka uporabniška prijaznost • enostavno programiranje • odobritev PTB in OIML • pomnilnik za 99 vrst izdelkov • vodilo za uporabnika preko jasnega tekstovnega zaslona v 6 jezikih   Uporabniški terminal BT 15 Za samodejno nastavljanje različnih vrst materiala na daljavo, vključno z motorično nastavitvijo parametrov dolžine/širine vreč.   Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Vertikalen verigen šreder / Querstromzerspanner QZ 37 kW Rsdjrrhcpspfx Anpsch Подходящ за раздробяване на пластмаса, платки, стружки, биомаса и други материали. Лесно регулируем размер на фракцията. Много ефективна машина, като единственият инструмент за раздробяване е веригата. Готов за работа. Оборудван със синхронизиран подаващ конвейер и електрически шкаф.