Telemecanique Xusf nakup rabljenega (82)

Stanje: rabljeno, številka stroja/vozila: 16842, Leto izdelave: 2018, obratovalne ure: 5.836 h, nosilnost: 2.000 kg, težišče tovora: 600 mm, dolžina vilic: 1.190 mm, velikost zadnje pnevmatike: Tandem, skupna masa: 864 kg, tip motorja: Električni, proizvajalec: Still Dsdpfsygzfaex Apleut

Stanje: rabljeno, številka stroja/vozila: 16841, Leto izdelave: 2016, obratovalne ure: 5.842 h, nosilnost: 2.000 kg, težišče tovora: 600 mm, dolžina vilic: 1.190 mm, velikost zadnje pnevmatike: Tandem, skupna masa: 864 kg, tip motorja: Električni, proizvajalec: Still Dodpfx Apoygzd Nsljut

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 4.253 h, nosilnost: 2.000 kg, gradbena višina: 1.500 mm, dolžina vilic: 1.600 mm, lastna masa: 790 kg, vrsta pogona: Elektro, gradbena širina: 725 mm, Low lift pallet truck Load centre: 600 mm Fork width: 170 mm Fork thickness: 55 mm Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Polyurethane Front tyres condition: 60 - 80% Rear tyres type: Polyurethane Rear tyres condition: 60 - 80% Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: IBB Battery type: PzS Battery year: 2016 Battery condition: 40 - 60% Duodpfxot Ddrio Apljt

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 5.797 h, nosilnost: 2.000 kg, vrsta goriva: električni, prevoženi kilometri: 5.797 km, PRIČAKOVANO Ta električni paletni viličar z vožnjo znamke STILL je iz leta 2011; števec ima 5.797 ur; Paletni viličar ima nosilnost 2.000 kg; Baterija je opremljena z avtomatskim sistemom za polnjenje in ZUNANJIM polnilcem; Dogovorite se za testno vožnjo. Video sledi. Dsdpfx Apow Snccelsut

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 2 h, številka stroja/vozila: 111, nosilnost: 250 kg, tip droga: dupleks, Oprema: ABS, GSR B240PX – TRUCK-MOUNTED AERIAL PLATFORM Condition: NEW (2025.) AVAILABLE VEHICLES Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TECHNICAL SPECIFICATIONS Working height: 23.7 m Outreach (80 kg): 12.3 m Outreach (250 kg): 8.25 m Basket capacity: 250 kg Working range: 450° Basket rotation: 70° + 70° ADDITIONAL INFORMATION ✅ Option to purchase via leasing or loan ✅ Price and additional configurations on request ✅ Option to install air conditioning ✅ Registration and homologation included in the price for Croatia! ✅ Service and spare parts provided WHY CHOOSE GSR TRUCK-MOUNTED PLATFORMS? 🔹 Over 130 years of manufacturing experience. Dujdpoxvx S Uefx Aplst 🔹 Each machine is assembled by hand and extensively tested before delivery. 🔹 Only the highest quality materials are used – Swedish STRENX and German THYSSEN-KRUPP steels. 🔹 All components sourced exclusively from the European market – top-level quality control. 🔹 GSR truck-mounted platforms are synonymous with reliability, safety, and longevity. ELECTRICAL SYSTEM High-quality wiring, sensors and safety switches from leading manufacturers: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON HYDRAULIC SYSTEM Accurate and safe operation under high pressures thanks to proven components: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI PRICE: ON REQUEST Price depends on vehicle and configuration. Over 30 years of experience in: 🔹 Service 🔹 Rental 🔹 Sales of aerial platforms 🌍 EXCLUSIVE REPRESENTATIVES FOR: Croatia, Slovenia, Montenegro, Bosnia and Herzegovina, and Serbia

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 3 h, številka stroja/vozila: 12, nosilnost: 250 kg, tip droga: dupleks, dvižna višina: 22.000 mm, Oprema: ABS, 🚀 GSR B220PXE – AVTODVIGALO S KOŠARO Stanje: NOVO (2026) 🚚 VOZILA V PONUDBI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 ⚙️ TEHNIČNE SPECIFIKACIJE Delovna višina: 21,75 m Bočni doseg (120 kg): 11,25 m Bočni doseg (250 kg): 8,45 m Nosilnost košare: 250 kg Delovno območje: 450° Rotacija košare: 90° + 90° Djdpfx Aoxvx Rqjpljut 💡 DODATNE INFORMACIJE ✅ Možnost nakupa preko leasinga ali kredita ✅ Cena in dodatne konfiguracije na povpraševanje ✅ Možnost vgradnje klimatske naprave ✅ Registracija in homologacija vključeni v ceno za Hrvaško! ✅ Servis in rezervni deli zagotovljeni 💪 ZAKAJ IZBRATI GSR AVTODVIGALA S KOŠARO? 🔹 Več kot 50 let izkušenj v proizvodnji. 🔹 Vsaka enota je natančno sestavljena in večkrat preizkušena pred dobavo. 🔹 Uporabljeni samo najkakovostnejši materiali – švedski STRENX in nemški THYSSEN-KRUPP jekli. 🔹 GSR dvigala so sinonim za zanesljivost, varnost in dolgo življenjsko dobo. 🔹 Vse komponente prihajajo izključno z evropskega trga – od proizvajalcev z najvišjo stopnjo nadzora kakovosti. ⚡ ELEKTRIČNI SISTEM Zanesljivo in varno delovanje zahvaljujoč vrhunskim komponentam: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON 💧 HIDRAVLIČNI SISTEM Stabilno in natančno delovanje pri visokih pritiskih – preverjena kakovost: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 CENA: NA POVPRAŠEVANJE 📞 Kontaktirajte nas za individualno ponudbo in razpoložljive konfiguracije. Več kot 30 let izkušenj v: 🔹 Servisu 🔹 Najemu 🔹 Prodaji avtodvigal s košaro 🌍 GENERALNI ZASTOPNIK ZA: Hrvaško, Slovenijo, Črno goro, Bosno in Hercegovino ter Srbijo

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 1 h, številka stroja/vozila: 1, moč: 100,03 kW (136,00 KM), nosilnost: 250 kg, tip droga: teleskopski, dvižna višina: 22.800 mm, Oprema: ABS, GSR B230T4 – TELESCOPIC AERIAL PLATFORM Condition: NEW (2026) AVAILABLE VEHICLES Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TECHNICAL SPECIFICATIONS Working height: 22.8 m Lateral outreach (80 kg): 14.4 m Lateral outreach (250 kg): 10.0 m Basket load capacity: 250 kg Working range: 450° Basket rotation: 90° + 90° ADDITIONAL INFORMATION Financing options: leasing or credit Price and configuration: on request Optional air conditioning installation Registration and homologation included in price for Croatia! Service and spare parts available WHY CHOOSE GSR AERIAL PLATFORMS? Over 50 years of experience in manufacturing and technological refinement No mass production – each machine is precisely assembled and tested individually Dedpfx Apexvx E Uelout Only premium materials used: • Swedish steel STRENX • German steel THYSSEN-KRUPP GSR aerial platforms are renowned for reliability, durability, and ease of operation ELECTRICAL SYSTEM Reliable and safe operation thanks to components by leading global manufacturers: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON HYDRAULIC SYSTEM High safety and precision thanks to top-quality hydraulic components: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI PRICE: ON REQUEST Contact us for a personalized quote and available configurations. Over 30 years of experience in servicing and selling aerial platforms! Exclusive representative and authorized service center for Italian premium aerial platforms GSR IMPORTER AND EXCLUSIVE REPRESENTATIVE FOR: Croatia • Slovenia • Montenegro • Bosnia and Herzegovina • Serbia

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 10 h, številka stroja/vozila: 123, moč: 100,03 kW (136,00 KM), nosilnost: 300 kg, tip droga: teleskopski, vrsta goriva: dizel, barva: bela, Oprema: ABS, 🚀 NEW – GSR TELESCOPIC AERIAL PLATFORM 18M (2026) 🔧 TECHNICAL SPECIFICATIONS Working height: 17.8 m Lateral outreach (80 kg): 12.8 m Lateral outreach (300 kg): 8.15 m Basket capacity: 300 kg Working range: 450° (operation above the cab possible) Basket rotation: 70° + 70° Dedpjxvxwdefx Aplout 🚚 VEHICLES AVAILABLE Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 ⚙️ CONDITION AND DELIVERY ✅ New vehicle – 2026 model ✅ Available immediately (OR PRE-ORDER) ✅ Registration and certification included in the price for Croatia ✅ Purchase via leasing or credit available ✅ Option to install air conditioning 💪 WHY CHOOSE GSR AERIAL PLATFORMS? 🔹 Over 50 years of tradition – manufacturing focused exclusively on quality and durability 🔹 No mass production – each machine is hand-assembled and tested multiple times 🔹 Only top-quality materials used: Swedish steel STRENX German steel THYSSEN-KRUPP (2 mm thickness) 🔹 Result: dependable, interruption-free operation – confirmed by many customers over 30+ years! ⚡ ELECTRICAL SYSTEM Quality wiring, sensors, and safety switches from leading global manufacturers: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON 💧 HYDRAULIC SYSTEM Precise, safe, and long-lasting operation under high pressure – thanks to components from: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 PRICE ON REQUEST 🔸 Service and spare parts guaranteed 🔸 Official GSR aerial platform distributor 🔸 Many years of experience in sales, service, and rental OFFICIAL DISTRIBUTOR & AUTHORIZED SERVICE CENTER FOR ITALIAN PREMIUM GSR AERIAL PLATFORMS 📍 For Croatia, Bosnia & Herzegovina, Montenegro, North Macedonia, Slovenia, and Serbia

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 0 h, številka stroja/vozila: 100, nosilnost: 250 kg, tip droga: teleskopski, dvižna višina: 27.000 mm, Oprema: ABS, AUTO PLATFORM GSR B270T (2026) Condition: New | Availability: Immediate delivery CHASSIS OPTIONS Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 Dodpfx Apsxvx N Telout TECHNICAL SPECIFICATIONS Working height: 26.65 m Lateral outreach (80 kg): max. 16.0 m Lateral outreach (250 kg): max. 11.2 m Basket capacity: 250 kg Working range: 450° Basket rotation: 90° + 90° Standard colour: RAL 9010 (chassis), RAL 9011 (subframe & outriggers) Platform: anti-slip aluminium surface Basket: aluminium, 1400 × 700 × 1100 mm, “Walk-In” type, with safety harness anchor points Gross vehicle weight: 3,500 kg Drive: rear wheel (4×2) Transmission: manual – 6 speeds / 500 Nm Engine: 2.3 L F1A EURO 6D – 136 HP Wheelbase: 3,750 mm Steering: left-hand drive Wheels: 225/65 R16 M+S – single Cab: single (2 seats) Vehicle colour: Polar white FUNCTIONS & HYDRAULIC-ELECTRONIC SYSTEM Automatic outrigger controls from basket and ground Stabilisation type: front and rear – extendable/vertical outriggers Simultaneous movement control Automatic engine speed adjustment Multi-function joystick in basket with proportional electro-hydraulic controls CAN BUS electronic control system Automatic basket levelling Home Function – automatic return to starting position Engine start/stop from basket Load limiter with double safety Inclinometer (tilt sensor) Shut-off valves with flange Protected controls in basket Emergency bypass for operator rescue Emergency stop and engine shut-off from any control station Manual emergency pump Hand-cabin collision prevention device Stabiliser closed indicator in cab Aerial part centering indicator on basket Digital hour meter with stabiliser position display ELECTRICAL COMPONENTS BOSCH, SCHNEIDER, GEWISS, PENNY+GILES, TELEMECANIQUE, OMRON HYDRAULIC COMPONENTS BOSCH, BREVINI, ATLANTIC-FLUID TECH, WALVOIL, REXROTH, PIRELLI EQUIPMENT & ACCESSORIES Steel rims Rear window in cab Central locking with remote control Oil level and tyre pressure warning ESP system + AEBS City Brake (active safety) Speed assist and intelligent speed limiter Driver drowsiness indicator + event recorder Automatic windscreen wiper control Front cab protection bar Airbags (driver & passenger) Bluetooth radio with USB port Power Take-Off (PTO) for hydraulic pump PVC support pad set 300×300×30 mm ADDITIONAL INFORMATION Financing via leasing or credit Price and configurations on request Installation of air conditioning as optional extra! Vehicle registration service available for Croatia! ORIGINAL C.O.C. INCLUDED IN THE PRICE: Original C.O.C. for IVECO or MERCEDES C.O.C. for GSR B270T superstructure on IVECO or MB! With these two original C.O.C.s, the GSR B270T aerial platform can be registered in any EU country (and beyond) without any additional certification – therefore absolutely hassle-free! Service and spare parts available All components of European origin – maximum quality and reliability! +++BY PROFESSIONALS FOR PROFESSIONALS+++ WE ARE: Importer and general distributor for GSR aerial platforms for Croatia, Slovenia, Montenegro, Bosnia & Herzegovina, and Serbia. Over 30 years of experience in sales, service and rental of access platforms. Direct source – service, spare parts and technical support available throughout Croatia. Price: on request

Stanje: novo, Shaft diameter: 120 mm Roller diameter: 390 mm Motor power: 15 kW Length: 2000 mm Width: 1650 mm Height: 1900 mm Approx. weight: 4450 kg Standard features • Steel construction • 3 rolls driven by hydromotor and planetary gearbox • Horizontal and vertical operating positions • Mobile control panel Dedpjy Hymqsfx Aplsut • Hardened standard rolls • Hardened and ground shafts made of high-strength special steel • Digital read-outs (2 units) • 3-axis hydraulic lateral guide rolls • Two-speed operating system • Hydraulic components: Duplomatic (Italy) • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Manufactured in accordance with EC safety regulations (CE marking) and ISO 9000 certification • Operating manual in English Options: NC unit with 7" screen: EUR 7,500 Capacity table: No | Profile Type | Size (mm) | Max (mm) | Min. (mm) | Rolls Type 1 | 125x25 | 1200 | Standard Rolls 2 | 200x50 | 1000 | Standard Rolls 3 | 65x65 | 750 | Standard Rolls 4 | Ø80 | 850 | Optional Rolls 5 | Ø5”x6.35 | 1500 | Optional Rolls 6 | Ø160x4 | 2800 | Optional Rolls 7 | 120x40x4 | 1800 | Optional Rolls 8 | 90x5 | 1800 | Optional Rolls 9 | 120x120x12 | 1200 | Optional Rolls 10 | 100x100x10 | 1200 | Optional Rolls 11 | 100x11 | 800 | Standard Rolls 12 | 100x11 | 1000 | Standard Rolls 13 | 100x11 | 800 | Optional Rolls 14 | UPN 220 | 1000 | Standard Rolls* 15 | UPN 220 | 1200 | Standard Rolls* 16 | IPN 220 | 1000 | Standard Rolls* 17 | HEB 120 / HEA 140 | 1200 | 1200 | Standard Rolls* 18 | UPN 120 | 10000 | Optional Rolls 19 | IPN 160 | 5000 | Optional Rolls 20 | HEB 100 / HEA 120 | 1600 | 4000 | Optional Rolls *Some rows indicate capacities for both max. and min. radii with different profile types. Optional rolls may be required for certain profile forms or dimensions.

Stanje: generalkompletno obnovljen (rabljeno), Honski stroj (križno brusilni stroj) SUNNEN ML3500 (primerljivo z modeli: ec3500, ml5000, ml2000, ml 2000, ml 5000) Stroj je deležen popolne elektronske obnove (Siemens / Telemecanique) Zaslon na dotik. Možna povezava z nakladalnikom. Dedpjw Npt Rsfx Apljut

Stanje: generalkompletno obnovljen (rabljeno), Honilni stroj (križno brusilni stroj) Dsdpfx Apjphvk Ijljut SUNNEN EC3500 (podobno kot ml3500, ml5000, ml2000) PRODANO – kontaktirajte nas za alternative, npr. ML3500 ali ML2000 Popolni elektronski retrofit (Siemens) Zaslon na dotik. Možni vmesnik s polnilnikom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, moč: 12 kW (16,32 KM), Internal dimensions: Width 1350 mm - Height 1900 mm - Depth 1350 mm. Dedpfoy Ipzmjx Aplout Operating temperature: 100°C, homogeneity ± 5°C, empty oven, stabilized regime, measured at 150 mm from the walls and 300 mm from the door. Maximum design temperature: 150°C (air). Internal walls: galvanized steel. External walls: painted steel, sand color 42 for the panels and red RAL 3020 for the frame. Insulation: 60 mm rock wool. Door: single leaf - silicone gasket - right hinges. Floor: without flooring. Heating: electric - power 12 kW/contactors. Controller: microprocessor-controlled, TMS type, brand ERO ELECTRONIC. Setpoint and temperature display – PID action. Calibrated type K thermocouples. Process timer with indicator light; temperature reached and end of timer (cycle) - Type Timer 815. Temperature safety: heating shutdown, audible and visual alarm in case of overtemperature, restart after fault acknowledgment. Start-up and automatic shutdown timer. Internal ventilation: Airflow rate: 6600 m³/h - Motor power: 1.5 kW. Exhaust: 1 exhaust port, diameter 100 mm. Intake: 1 intake port + metal mesh filter. Electrical cabinet: Supply voltage 3 x 400 V 50 Hz. Control circuit voltage 110 VAC. Locked with RONIS key (1242 E or triangle). Wiring of components complies with CE - EN 60 204 standard. Electrical components are selected from the following brands: TELEMECANIQUE, SOCOMEC, MAF, LEGRAND. • Equipment can be inspected near LYON.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced Dsdpfx Apeu Thhrolout - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed Dujdpovf E Avefx Aplot - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Dusdpfxeviwdms Aplst Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: rabljeno, Leto izdelave: 2003, 1 used, very well-preserved universal milling machine with 3-axis digital readout FAGOR, infinitely variable feed and powered overarm drive Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Year of manufacture: 2003 Technical Data: Spindles: Spindle taper vertical + horizontal ISO 50 Speed range, vertical, stepless 30 – 2000 rpm Speed range, horizontal, stepless 30 – 2000 rpm Table: Clamping area 1350 x 320 mm X-axis, manual / automatic 1100 / 1080 mm Y-axis, manual / automatic 360 / 340 mm Z-axis, manual / automatic 460 / 440 mm Overarm adjustment approx. 600 mm Table swiveling ± 45° Max. distance table surface to horizontal spindle center 490 mm Max. distance table surface to vertical spindle nose 630 mm Table movement: Feeds longitudinal/transverse, stepless 12.5 – 630 mm/min Vertical feed, stepless 5 – 262 mm/min Rapid traverse longitudinal/transverse 2.5 m/min Duodpfsbpmurox Apljt Vertical rapid traverse 1.04 m/min Drive Drive power 7.5 kW Dimensions and Weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special Features: • 3-axis digital readout FAGOR model NV 300 M • Universal milling head "HURON" system manually adjustable over 2 planes • Infinitely variable feed via joystick and potentiometer on all 3 axes • Infinitely variable speed for vertical + horizontal via potentiometer with 2 servo drives, manufacturer TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed, each with digital display • Overarm with motorized drive for the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for X-axis • Horizontal milling attachment with 2 counter bearing blocks • Coolant system • Central lubrication system • Chip tray • Machine feet • Machine lamp • Operating manual • Electrical equipment CE • CE compliant Original new price: €65,800.00 net The machine can be inspected and demonstrated under power at our warehouse at any time by prior arrangement. Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: SCIAC45, Used Bottle Washer Kompass SK481 8000 bph General Features of the Used Kompass SK481 8000 bph Bottle Washer The used Kompass SK481 8000 bph bottle washer washes bottles with a diameter of 45 mm and provides a rated capacity of 8,000 bottles per hour. Kompass manufactured this machine in 2009 for medium-speed bottling lines. Specifically, the SK 481 model offers a compact, efficient solution for lines where compatibility and consistent performance are key. This makes it suitable for both new installations and retrofit projects. Dsdpfxsyhbwro Apleut Operation and Mechanical Configuration of this Used Washer This washing unit rotates counterclockwise, while bottles enter from right to left. Therefore, the machine can be easily aligned with conventional conveyor systems. Additionally, the mechanical setup includes 32 grippers, which securely hold each bottle during the rinse phase. The used Kompass SK481 8000 bph performs a single rinsing operation using fixed nozzles and water as the washing medium. This ensures minimal complexity in maintenance and operation. Processable Products and Application Versatility The used Kompass SK481 8000 bph can handle various products, including alcoholic beverages, juices, syrups, oils, soft drinks, spirits, wine, and water. Thanks to this broad compatibility, the machine supports production lines with frequent product changes. Furthermore, operators can use it across several beverage categories without major mechanical adjustments. The consistent rinsing method yields uniform results regardless of the processed liquid. Electrical and Dimensional Specifications of this Used Bottle Washer The machine operates at 415 volts with a frequency of 50 Hz, consuming 3.0 kW of electric power. These parameters comply with standard industry infrastructure. Additionally, the machine’s footprint—1850 mm long, 2250 mm wide, and 2100 mm high—fits comfortably in most medium-sized bottling halls. This makes it easy for engineers to plan layouts with minimal disruption. Likewise, these dimensions support seamless integration with adjacent line modules. Automation and Control System The used Kompass bottle washer utilizes a Telemecanique PLC (programmable logic controller) to manage its automation logic. This control system ensures precise execution of washing cycles and contributes to long-term machine reliability. Furthermore, Telemecanique components offer high compatibility with industrial automation systems, simplifying diagnostics and maintenance. Plant technicians can thus easily connect this machine to existing control infrastructures.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ATV68C15 N4, vhodna napetost: 400 V, vhodni tok: 234 A, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 80 Hz, vrsta zaščite (IP koda): IP00, leto zadnje generalne obnove: 2025, neprekinjena moč: 132 kW (179,47 KM), Oprema: Na voljo je tipska ploščica, Exact model designation: Schneider Telemecanique ATV68C15 N4 Output power and output current: 132 kW | 250 A • NEW in original packaging! • Formed (pre-conditioned)! • Easy operation via integrated control panel • Quick parameterization possible • Original operating manual included for commissioning Only 1 unit left in stock! Duodpfxsk Iuq Ds Aplst

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ATV68FC13 N4, vhodna napetost: 400 V, vhodni tok: 193 A, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, vrsta zaščite (IP koda): IP00, leto zadnje generalne obnove: 2025, neprekinjena moč: 110 kW (149,56 KM), Oprema: Na voljo je tipska ploščica, Exact model designation: Schneider Telemecanique ATV68FC13 N4 Output power and output current: 110 kW | 206 A Djdpfsk Iuqvex Apljut ° NEW in original packaging! ° Factory-tested! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating manual for commissioning included Only 1 unit left in stock!

Stanje: zelo dobro (rabljeno), DEMAG / ABB / TELEMECANIQUE - Frekvenčni pretvorniki / pretvorniki - 11 kosov: 1. DEMAG tip - ACS800 04M-0140-3+D150+E210+H355+H356+H360 z uporovno enoto (nova) - 1 kos. 2. DEMAG tip - ACS800 04M-0210-3+D150+E210+H355+H362+N672 z uporovno enoto (rabljena) - 1 kos. 3. DEMAG tip - UD DPU415V024E10 - 1 kos. 4. TELEMECANIQUE tip - ATV 58ED23N4 - 15 kW (v originalni embalaži). 5. DEMAG tip: ABB - ACS 800 - 2 kosa. 6. DEMAG tip: ABB - ACS 800 - 1 kos. 7. VACON / AC DRIVE - 3 kosi. 1. VACON tip: X4K40400C 2. VACON tip: XX4K440075C 3. AC DRIVE tip: X4K40075C1 Djdpfx Aoyu S Alopljut 8. AC DRIVE tip: X4 - 1 kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, CEROX 1000 Stroj za vroče tiskanje / termični prenos tiska — 1999 Znamka: CEROX Model: 1000 Leto: 1999 Tip: Stroj za tiskanje s termičnim prenosom Števec ciklov: 130.342 ciklov Primerne površine: Valjaste, ovalne in nepravne oblike (idealno za steklenice in kozarce) Krmilnik: Telemecanique Dimenzije: 1.900 x 2.500 x 1.870 mm Vključuje: ✅ Aluminijasto orodje ✅ Silikonsko orodje ✅ Potrošni material in rezervni deli ✅ Vzorci graviranja Dusdpfey Eyicsx Aplet Stanje: Dobro Lokacija: Albacete, Španija Na voljo za ogled po dogovoru Na voljo račun z DDV

Stanje: zelo dobro (rabljeno), SINGLE-ROLLER LACQUER APPLICATION MACHINE Duedpfxogz Swle Apljt Max. working width: 1300 mm Machine length: approx. 900 mm Panel thickness (working height): 3–80 mm Feed rate adjustable: 5–20 m/min PLC control panel (Touch Screen) by Telemecanique/Schneider With integrated control cabinet and operator panel Total connected load: 2.9 kW Equipped with: 1°) Dosing unit (chrome steel dosing roller, diameter approx. 173 mm, approx. 0.75 kW) 2°) Application unit (rubber-coated lacquer roller, diameter approx. 250 mm, approx. 0.75 kW) with a support rubber roller positioned opposite the tip (diameter approx. 182 mm, approx. 0.75 kW)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 4400 x 5000 x 3700 mm Weight: 4500 kg Total power requirement: 3.8 kW Gluing Star VS-3000-16 The gluing star is designed for edge and thickness gluing of timber, with glue joints being air-dried. The system has a compact footprint and can be expanded modularly to suit the size of the workpieces and the required production capacity. In addition, it features user-friendly operation and maintenance. The glued timber is placed into clamping units, each mounted on a continuous chain per deck, and can be easily and quickly adjusted to accommodate different workpiece dimensions. The machine is suitable for material thicknesses from 25 to 90 mm. For thinner or thicker materials, additional pressure elements (15–25 mm) are required. Clamping units can be tightened manually, with a manually operated hydraulic motor, or with an automatic hydraulic motor. - Working length: 3,000 mm - Working width: 1,250 mm - Material thickness: 25–90 mm - Number of decks: 16 - Number of clamping units per deck: 8 - Air supply: 8 bar, 1/2" - Rotary drive motor power: 0.55 kW - Pressure per clamping unit: 1–12 kN - Max. load per deck: 150 kg Dodpjv A Hxasfx Apljut - Pneumatics: Camozzi - Electrical system: Telemecanique - Gear motor: Watt - Clamping units with finger joints - Safety guard - Hydraulic unit - Pump flow: 6.3 l/min - Hydraulic motor power: 3.0 kW - Hydraulic tank: 50 l - Max. pressure of hydraulic motor: 110 bar - Transport dimensions: 3800 x 2400 x 2200 mm, 1400 kg 4400 x 1600 x 2000 mm, 950 kg 1600 x 1600 x 800 mm, 900 kg 1600 x 1600 x 800 mm, 900 kg - Installation dimensions (L x W x H): 4400 x 5000 x 3700 mm - Weight: 4500 kg Options: - Pressure elements for thin panels (15–25 mm): €44.00/each - Alignment with 4 pneumatic cylinders: €600.00

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 4400 x 4600 x 3700 mm Weight: 4300 kg Total power requirement: 3.8 kW Dedpfx Aov A Hw Njplsut Verleimstern VS-3000-12 The Verleimstern is designed for width and thickness wood gluing, where the glue joints are air-dried. The Verleimstern has a compact footprint and can be modularly expanded to match the workpiece dimensions and required output. Additionally, it is user-friendly and easy to maintain. The glued wood is placed into the clamping units, which are mounted on the endless chain of each tier and can be quickly and easily adjusted to various workpiece sizes. The Verleimstern is suitable for material thicknesses from 25 to 90 mm. For thinner or thicker materials, additional pressure elements (15–25 mm) must be used. The clamping units can be tightened manually, with a manually operated hydraulic motor, or with an automatically operated hydraulic motor. - Working length: 3000 mm - Working width: 1250 mm - Material thickness: 25–90 mm - Number of tiers: 12 - Clamping units per tier: 8 - Air connection: 8 bar, 1/2" - Motor power for rotation device: 0.55 kW - Clamping pressure per unit: 1–12 kN - Max. load per tier: 150 kg - Pneumatics: Camozzi - Electricals: Telemecanique - Gear motor: Watt - Clamping units are finger-jointed - Safety guard - Hydraulic unit - Pump flow: 6.3 l/min - Hydraulic motor power: 3.0 kW - Hydraulic tank: 50 l - Max. hydraulic motor pressure: 110 bar - Transport dimensions: 3800 x 2400 x 2200 mm, 1400 kg 4400 x 1600 x 2000 mm, 950 kg 1600 x 1600 x 800 mm, 900 kg 1600 x 1600 x 800 mm, 900 kg - Installation dimensions (L x W x H): 4400 x 4600 x 3700 mm - Weight: 4300 kg Options: - Pressure elements for thin panels (15–25 mm): €44.00/each - Alignment with 4 pneumatic cylinders: €600.00