Sistem Za Dovajanje Vročega Lepila Brez Rezervoarja nakup rabljenega (86.708)

Stanje: dober (rabljeno), Approx. 4 units h.a.l.m. solar cell measuring system, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P complete device – used -: Price per unit ex stock: €8,350 (net) Complete IV Measurement System Manufacturer: H.A.L.M. Model: cetisPV Consisting of: CTL1, cetisPV-XF2-C, cetisPV-XF2-R, cetisPV-XF2-P complete device Year of manufacture: unknown Condition: good Hedpfxsukiu No Af Ton Available: immediately Location: Warehouse Frankenberg / Saxony

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return Hodsv Tm Ayjpfx Af Ten + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Leto izdelave: 2006, stanje: kot nova (razstavni stroj), številka stroja/vozila: 31331, DISTILATOR DNP 2000 SEMIAUTOMAT – SISTEM DE DISTILARE CU ABURI PENTRU PROTEINĂ-AZOT Raypa DNP-2000 An fabricație: 2006, neutilizat Distilator pentru proteină-azot bazat pe metoda Kjeldahl. Automat, pentru analiza azotului proteic din probe de materii prime sau materiale procesate, destinat industriei alimentare. Disponibile metode specifice. Rezultatele sunt conforme cu reglementările: EN/ISO, AOAC. DISTILATOR DE AZOT – DNP-2000 Caracteristici • Douăzeci de programe liber configurabile de utilizator. • Sistemul dispune suplimentar de trei programe fixe: – Test cu sulfat de amoniu. – Preîncălzirea sistemului. – Spălarea recipientului de deșeuri. Hjdpfxjfiliwj Af Tsn Avantaje • Kit opțional pentru titrare automată. • Aspirare eșantion. • 20 programe utilizator. • Calibrare pompă de către utilizator. • Generator de abur cu control nivel apă. • Pompă acid boric. • Senzor ușă deschisă. Performanțe • Domeniu de măsurare: 0,1–200 mg N. • Randament recuperare azot: >99,5%. • Reproductibilitate: ±1%. • Timp distilare: 4 min/100 ml. • Consum apă de răcire: 1,2 l/min. • Putere: 2000 W (100%). Parametri și valori programabile • Apă pentru diluție: 0–240 ml. • Soluție OHNa: 0–240 ml. • Soluție H3BO3: 0–240 ml. • Timp reacție (întârziere): 0–30 min. • Timp distilare: 0–30 min sau nelimitat. • Reglarea puterii aburului: 30–100%. Siguranță • Detecție ușă închisă. • Detecție tub digestie. • Termostat supratemperatură. • Utilizare în industria alimentară și oenologie (vinificație). • Documentație: manual de instrucțiuni + garnituri montaj și mufă. • Pentru companiile din România este posibilă vânzarea în rate. Preț: 3.600 Euro + TVA Ex Works încărcat FCA: Oradea/România Ne rezervăm dreptul la erori, modificări și vânzare intermediară. Vorbit cu: vorbim engleză/Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim româna.

Stanje: rabljeno, 1 kos sistem za povezovanje CNP CANAPA 35 220V Barva: kot prikazano, po slikah in ogledu Dimenzije D/Š/V: 90x60x76cm Hedpfsy Tkiijx Af Ton Stanje: rabljeno

Stanje: rabljeno, Leto izdelave: 2010, Used machine Year of manufacture: 2010 Equipment and technical data: Right-hand execution 2 side tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (Double system) Max. application width: 2,040 mm (2 × 1,020 mm) Version: Double system, both machines can also be operated individually Applicator roller: reinforced version Applicator roller diameter: 46 mm Knurling of applicator roller: 0.5 mm Bearing: reinforced roller bearings Bearing shells: hardened Wiper: pneumatically operated, needle-bearing Main bearing lubrication: external, filling via manual grease gun Tank seal: adjustable and replaceable without disassembling applicator component Application speed control: via frequency inverter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pcs, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Pressure roller lowering: automatic after drive motor shutdown Material pass height adjustment: electric motor, manual jog mode Applicator unit stroke: 0 – 200 mm Transport height: 925 mm (lower edge of material) Pressure roller drive: separate drive Motor: incl. motor mounting console and cover Additional application speed control: via separate frequency inverter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminum profile system Stands: 2 pcs, made of anodized aluminum plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 liters Heating power: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Protection: 63 A Compressed air connection: < 8 bar Use: Melting and application of non-reactive hot melt adhesives Hjdoy E Avlopfx Af Ton Weight: 1560 kg Availability: short-term Location: Rhineland-Palatinate

Stanje: rabljeno, Izvlečevanje čistega zraka HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -ge Filtiranje zraka preko filtrskih vreč, motorizirano čiščenje, preizkušeno na prah, premični zbirni zabojnik ----- Tehnični podatki ----- Sesalni priključek Ø: 250 mm, Hsdpsy R Upzofx Af Ten Nazivni volumenski pretok: 4.241 m³/h, Minimalni volumenski pretok: 3.534 m³/h, Število vreč: 3 kosa, Motor: 4 kW, Mere (DxŠxV): 2.500x1.280x2.500 mm, Teža: 630 kg

Stanje: novo, Vacomats are mobile extraction units designed to remove large quantities of dust and chips in compact spaces. These clean air extraction systems (negative pressure), intended for indoor installation, can be used for single or multi-machine extraction, handling air volumes of up to 10,000 m³/h. Built in accordance with the latest EU standard EN 16770, they are particularly suitable for woodworking shops where special safety requirements apply due to the risk of dust explosion. They are suitable for materials classified under dust explosion class St1. Filter cleaning in the Vacomat XPe is carried out purely electro-mechanically via an efficient shaking motor, which automatically activates once all connected machines are switched off. The control is managed via voltage-free contacts relaying the operating status of the woodworking machines. Motorized shaking control is included in the scope of delivery. Delivery does not include coils. Motorized filter regeneration, mobile design, extraction port can be mounted on either the right or left side, and the unit can be height-reduced for transport. ----- Technical Data ----- Extraction connection Ø: 180 mm Airflow: 2,610 m³/h Rated airflow: 1,832 m³/h Max. negative pressure: 2,450 Pa Filter surface area: 13.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 2 Motor power: 3.0 kW Dimensions (LxWxH): 2,085 x 900 x 2,130 mm Hjdpfx Aju T Hrief Tsn Weight: 414 kg Sound pressure level: 76 dB(A) Dust class: M Includes: integrated control cabinet

Stanje: novo, Clean Air Extraction Unit SCHUKO Vacomat 140/160 XPe - Exhibition Model - Motorized filter system, mobile, extraction port can be mounted on either the right or left side ----- Technical Data ----- Certification: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal airflow: 1,447 m³/h, Max. negative pressure: 2,200 Pa, Filter surface area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Hodpfx Aju R Szysf Tsn - New exhibition machine -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Mere (dolžina/širina/višina): 1700 x 800 x 2100 mm Število filtrskih vreč: 1 kos Število vreč za ostružke: 1 kos Premer cevi: 160 mm Dolžina cevi: 4000 mm Sesalna zmogljivost: 1850 m³/h Moč motorja: 3 kW Ta odsesovalna naprava je v dobrem stanju, takoj na voljo in jo je možno na mestu prodajalca preizkusiti pod napetostjo. OPIS: - Ciklon predločevalnik z rotacijskim celičnim zapornim ventilom za iztok med delovanjem - Mobilno - Primerno za odsesavanje vnetljivih prahov Dimenzije: Odsesovalec: 1,7 (širina) x 0,8 (globina) x 2,1 m (višina) Predseparacijska enota: 1,1 (širina) x 1 (globina) x 2,8 m (višina) Hjdpfx Aoxcyymof Ton

Stanje: dober (rabljeno), Kód: 0383 Značka: DUE B.ERRE STEMA - Taliansko Model: SPINAMATIC GLF HP - CE standard Stroj za nanašanje gostega lepila in moznikov s pnevmatsko pištolo za panele, vrata, okna in različne dele - CE standard Hjdpfxjy N Uq Ae Af Ton Tehnični podatki: Največja kapaciteta vstavljanja: 60 moznikov na minuto Premer moznika: 10/12 mm Dolžina moznika: 25 do 50 mm Največja globina vstavljanja: 30 mm Stroj deluje z enim premerom moznikov naenkrat Elektronsko doziranje količine lepila Sistem za pranje Fleksibilna roka s protiutežjo za razbremenitev pištole med delovnim ciklom (teža pištole približno 3 kg) Priporočena vrsta lepila: vodna emulzija – viskoznost Brookfield 580 mPa.s – delež suhe snovi 30 % – minimalna temperatura tvorbe filma 3–5 °C – čiščenje z vodo Kolesca na osnovi Napetost: 220 V enofazno Maksimalni pritisk: 6 atm Skupne dimenzije: 600 x 1000 x 2100 mm (v x š x d) Teža: 130 kg

Stanje: dober (rabljeno), Rabljena, komaj uporabljena Nederman naprava za odsesavanje izpušnih plinov za tovornjake in osebna vozila. Pošiljanje ni možno. Prosimo, ne pošiljajte e-poštnih povpraševanj! Za vprašanja smo vam na voljo po telefonu. Ogled in prevzem sta možna samo po predhodnem telefonskem dogovoru. Hjdpfjzapy Esx Af Ten Pridržujemo si pravico do sprememb, vmesne prodaje in napak.

Stanje: rabljeno, Feeding Technology / Feed System / Vibratory Feeder / Sorting Unit / Bowl Feeder Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screw Technology Feed System DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The unit was used for feeding electrical connector contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed conveyor supplies the pins on demand to the bowl feeder. From the bowl feeder, the product is fed via a linear feeder to the part turner. The part turner aligns the product to the correct orientation and releases it for further processing. The unit comes from a prototype system; an external electrical control is not included and should be provided via a PLC. Without modification, suitable for automatic and correctly oriented feeding of threaded bolts up to M4 x 40, for example. The unit consists of the following components: 1 piece Belt Hopper / Feed Conveyor DEPRAG Type: B 10 Serial No.: 1178201 Order No: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Belt surface dimpled - Foldable stainless steel chute Weight: 11 kg 1 piece Bowl Feeder Vibratory Pot KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl inner height: approx. 75 mm Hedpfxokpwuuj Af Ton Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Bowl Feeder Type: SZG Controller 6 Manufacturing No.: 35 1 piece Linear Feeder KENDRION Type: WS3B/36 Part No.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Linear Feeder Type: SZG Controller 6 Manufacturing No.: 35 1 piece FESTO Part Turner with 180° swiveling range - 1 piece FESTO Valve Block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR Base Module Type MVP12 - Complete unit mounted on a steel plate with 4 support feet Space required (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Prostornina rezervoarja: 5 l, zmogljivost taljenja: 5 kg/h, tip lepila: granulat in bloki (termoplastično), delovna temperatura: 20-200°C, čas ogrevanja (na 160°C): pribl. 30 min, viskoznost lepila: 100-20.000 mPas, priključki za grelne cevi: 1 do 4, polnjenje: ročno ali avtomatsko (RobaFeed 3), število dozirnih črpalk: 1, tip črpalke: batna ali gerotor črpalka, napajalna napetost: 200-400 V, 1-3 LNPE, priključna moč: 1,8 kW, dovod stisnjenega zraka: 6 bar, suh, neoljen, v skladu z ISO 8573-1, razred 4, elektronika: CLS, upravljalna plošča: membranska tipkovnica (TRM), integriran sistem vodenja nanosa: Robatech ICS TRM 4, teža: 34 kg, varnostni standard: CE, CSA. Možen je ogled na lokaciji. Hsdpfx Afozadl Ne Tsn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, delovna širina: 615 mm, skupna širina: 3.100 mm, skupna dolžina: 750 mm, skupna višina: 1.135 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 320 kg, dolžina rezanja (maks.): 600 mm, širina transportnega traku: 615 mm, leto zadnje generalne obnove: 2022, Linija za rezane žemljice Frilado model MSA 80 Ročno polnjenje Upravljanje ene osebe Zgornja plošča iz nerjavečega jekla Priključek 400V, vtikač 16A-CEE Rabljena stroj Veliko drugih pekarskih strojev na zalogi! Hodpovkthkofx Af Tjn

Leto izdelave: 2025, stanje: novo, Parts Cleaning Machine, Spray Cleaning System Type L122 Fully automatic hot water chamber washing machine with basket drive powered by geared motor, machine housing made of stainless steel 1.4301. - 2 stainless steel 3-sided nozzle systems with stainless steel flat jet nozzles - 2 stainless steel washing pumps (Manufacturer: Xylem/Lowara) - Level control as dry-running protection - 2 suction filters for pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. loading weight: 300 kg Hsdjhl Ic Repfx Af Ten - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Electrical connection load: approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Nagel Foldnak 8 z 2 spenjačnimi glavami Hjdpfxoy Rr Eaj Af Ten Nagel SP Plus Square Press Nagel Trimmer s trakovnim izhodom

Stanje: dober (rabljeno), Leto izdelave: 2013, Sorter for light loads, Optimus, SORTATION SYSTEM OPTISORTER HORIZONTAL, 200 trays, configured for 261 destinations – used - : Price sorter incl. control unit: ex location: €99,500 (net), including dismantling, packaging, and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control unit: Siemens S7 Hedpfx Aewxu A Rjf Ten Layout: OS-680113-264-D01 System capacity: 6,000 trays/hour Total system length: 53 m Total system width: 14 m Number of infeed stations: 1 Infeed station width: 2 m Number of trays: 200 pcs Usable tray size: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min: 150 / 120 / 10mm Max: 600 / 400 / 200mm Weight: min: 0.25kg / max.: 5kg No longer available: roller conveyors, pick-by-light, flap elements. At each sorting station there were two outputs, which sorted onto an upper or lower destination roller conveyor via a tilting chute. Total number of sort destinations in the system: the plant had 261 destinations. Number of destinations for special purposes (overflow, reject, etc.): 3 pcs. There is a pick-by-light system at the destination roller conveyor. This means all parts installed after tray dropping in the system flow are no longer available and are therefore not part of the sale! Condition: good Available immediately Location: Warehouse Frankenberg / Saxony Detailed description available on request in PDF (in English).

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, Šivalni stroj Horizon SPF-200L+FC-200L+LC-200 (brez zbiralnika). Stroj je v originalni embalaži (popolnoma nov, nikoli uporabljen). Kot uradni prodajalec lahko zagotovimo montažo in usposabljanje. Hsdpfx Afsy R Ayho Tsn

Stanje: rabljeno, številka stroja/vozila: 008597, Pozicija 1: Krožna žaga za plošče z avtomatskim podajanjem SCHELLING-VS 12 - FH6 - FH4 Hodpoy Stvpsfx Af Tjn Pozicija 2: Krožna žaga za plošče – podajanje spredaj SCHELLING-VS 12 - FH6 - FH4 Pozicija 3: Avtomatizirano skladišče SCHELLING-VS 12 - FH6 - FH4

Stanje: rabljeno, 3D Coordinate Measuring Machine ZEISS NUMEREX – Non-functional Granite measuring plate, granite measuring table, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W: 1525 x 1435 mm Usable area: 1525 x 1100 mm Measuring plate thickness: 305 mm Clear passage within portal: 1100 mm Probe holder diameter: Ø 9.5 mm Compressed air connection: 6 bar Power supply: 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment via pneumatic slide guides for X, Y, and Z axes - Plate mounted on subframe with 5 leveling feet, 3 bearing pads for the leveling feet - Computer and software missing (not included and not available) → unit is non-functional! Space requirement of the measuring machine L x W x H: 1600 x 1850 x 2200 mm Machine weight: approx. 2.8 tons Hjdpfofy U Ewsx Af Tjn One side of the plate is damaged (see picture), otherwise in good condition

Stanje: rabljeno, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - Defective - without control unit Machine not operational - no electrical function - without CNC control unit Serial No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Centre distance 700 mm Centre height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Hedod Rmcmepfx Af Ton Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control unit dismantled Space requirement (L x W x H) 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control unit missing. Mechanically in good condition, ideal for CNC retrofit Can be used as a source of spare parts or for refurbishment with a new control unit.

Stanje: rabljeno, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging system Fan Type S 140 / 0 / S1 Serial No. Year of manufacture 12 / 2004 Nominal air flow: 1451 m³/h Negative pressure: 1398 Pa Filter area: 18 m² Extraction connection: Ø 140 mm, reduced to Ø 120 mm Air outlet: 480 x 480 mm Motor power: 1.1 kW Power supply: 400 volts, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning via shaking motor - 2 discharge pipes at the bottom for waste collection bags, each Ø 500mm reduced to Ø 300mm - Dry fire extinguishing line with connection for C-hose, fire brigade connection for filter fire - Differential pressure switch for detecting filter contamination - Without control system (no control unit included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as shown in photos: 3050 mm Required space (L x W): 1850 x 1000 mm Weight: approx. 400 kg Very good condition Hjdpjr R Ewlefx Af Ton Ideal for wood dust, wood chips, plastic dust, or plastic chips.

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Hedpfx Asif Sg Sof Tsn Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Leto izdelave: 2022, obratovalne ure: 200 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, AirBasic je prenosni stroj za ločevanje lahkih in težkih sestavin različnih sipkih materialov. Stroj je kot nov in je bil zelo malo uporabljen. Navodila za uporabo in tehnični listi so na voljo v obliki PDF. Hodpfoyddazsx Af Ton

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) Hodpfx Afjfirx No Tjn - AC servomotors for X and Y axis movement - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.