Reinox Kabina Za Barvanje/Pršenje nakup rabljenega (93.527)

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Hodpfx Aofz I Ehsbnenr Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2026, stanje: novo, ROMER cabins are equipped with 4" color touchscreens. The cabin operation is intuitive and can be set in 3 modes: automatic (timer-based), automatic (based on a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning allows you to set both the cleaning frequency and the ignition timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the push of a button. We know from experience that it is difficult for operators to ensure filter maintenance. With this intelligent system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74–79 dB – that's not much. Even with a standard cabin configuration, it is difficult to hold a conversation. Browse through the cabin Hnjdpfx Ajfzkzhobner By pulling the lifter beams within the cabin, work efficiency is increased and the painter is relieved of the need to move them manually.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor Hodpfx Absfz A Iwonjnr The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch-Auslösung löschen Die ROMER-Kabinen sind mit 4-Zoll-Farb-Touch-Bedienfeldern ausgestattet. Die Kabinensteuerung ist intuitiv und in drei Modi verfügbar: automatisch (temporär), automatisch (über einen Plug-in-Filteradapter) oder manuell. Filterstecker-Sensor Die Kabinen sind mit einem Sensor ausgestattet, der den Anwender informiert, sobald die Filter wegen Verstopfung gereinigt werden müssen. Das System meldet ebenfalls, wenn die Filter bereits im Einsatz sind. Automatische Filterreinigung Das elektronische System zur automatischen Filterreinigung steuert sowohl die Reinigungsintervalle als auch den optimalen Reinigungszeitpunkt. Jeder Filter wird individuell gereinigt; die Filter können bei Bedarf auch manuell mit einer Druckluftpistole gereinigt werden. Aus Erfahrung wissen wir, dass es schwierig ist, den Bediener regelmäßig zur Filterreinigung aufzufordern. Dank des automatischen Systems muss der Bediener hier nicht eingreifen oder die Produktion unterbrechen. Hedpfx Absfzciqensnr Niedriges Geräuschniveau Die Aluminiumlüfter arbeiten sehr leise mit einer Lautstärke von 74–79 dB – das reicht nicht aus, um zu stören. Selbst bei der Standard-Kabinenkonstruktion ist es schwierig, sich innerhalb der Kabine zu unterhalten. Durchgehende Kabinen ("overhung squirrel cage") Die Kabine mit überhängenden Lüfterkäfigen trägt zur Produktivitätssteigerung bei, da die Lackierer sie nicht mehr manuell bewegen müssen. Vorratsfertiger Aufbau ist möglich. Explosionsschutz Die übrigen Kabinenkonstruktionen verhindern, dass sich während des Lackierprozesses explosionsfähige Gemische bilden. Jede Baugruppe wurde sorgfältig ausgewählt, um dieses Risiko wirksam zu minimieren.

Leto izdelave: 2020, stanje: novo, ROMER® je največji proizvajalec praškastih barv na Poljskem in eden največjih v Evropi. ROMER® je več kot 10.000 proizvedenih naprav, ki delujejo v več kot 45 državah po vsem svetu. Hnodpfxjfz U Tie Abnjr ROMER® proizvaja posamezno tehnološko opremo za lakirnice in popolne popolnoma avtomatske lakirnice. ROMER® ponuja rešitve za ogrevanje za letalsko in avtomobilsko industrijo za največja vprašanja na svetu. Zagotavljamo garancijski in po garancijski servis naprav, ki jih prodajamo, s celotno paleto rezervnih delov.

Stanje: novo, Leto izdelave: 2020, 🏭 BARVNA KOMORA ZA PRAŠNO BARVANJE KPO-3 Samodejno čiščenje filtrov z nastavljivim pulznim časom ter ročnim načinom. 🧼⏱️🖲️ 100 % poliester filtri – pralni, vodoodporni in dolgotrajni. 🧵💧♻️ ROMER JET™ čiščenje filtrov – patentiran hitri zračni pulz za močno čiščenje. 💥💨🏅 Nizkohrupni aluminijasti ventilatorji (74–79 dB) – varno, isker zmanjšano delovanje z nizko porabo energije. 🔇⚡🛡️ Hsdpfx Aboflk Akonenr Nastavljiva zračna zapora – antistatična plošča ščiti filtre in izboljšuje odsesavanje. 🌬️🛡️📈 Tesna namestitev filtrov – tesnilo in objemka za močno tesnjenje ter enostavno vzdrževanje. 🔩🧷✅ Upravljanje na dotik – samodejno (čas), samodejno (senzor zamašitve), ročni način + opozorila za menjavo filtrov. 📲🔁⚠️ Opcijska posoda za prah – zbiranje odpadkov ali fluidizirana posoda s direktnim dovodom za aplikator. 🧺💨🎯 Nadglavna prečnica – premika nosilce skozi kabino, zmanjšuje ročno delo. 🏗️➡️💪 Integrirana sita enota (z zabojnikom) – čiščenje vrnjenega prahu za ponovno uporabo, EX-cona vibrator. 🧪♻️⚙️ Eksplozijsko varna zasnova – skrbno izbrani deli preprečujejo eksplozivne zmesi. 🛡️💥✅

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 30.000 mm, skupna višina: 4.300 mm, skupna širina: 6.500 mm, teža obdelovanca (maks.): 100 kg, temperatura: 220 °C, ogrevalna zmogljivost: 80 kW (108,77 KM), višina obdelovanca (maks.): 1.200 mm, dolžina obdelovanca (maks.): 2.500 mm, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 800 mm, The continuous processing system consists of the following components: Hnsdsum Ufljpfx Abner - Chemical pre-treatment via spraying - Dryer - Powder coating system - Powder curing oven - Conveyor technology (indexing mode) - Electrical control system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.258 mm, skupna višina: 2.790 mm, skupna širina: 2.370 mm, trajanje garancije: 24 meseci, vhodna napetost: 380 V, Oprema: osvetlitev, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customised shipping quote. ✅ Made to order ✅ Brand-new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorised European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks from receipt of payment Please also enquire about the current stock availability. ⭐ Matech Powder Coating Booth – MATBOOTH.FT.3-L MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT.3-L is a professional powder coating booth designed for manual powder coating applications on small and medium-sized workpieces. The L-version features an extended base frame, offering improved working comfort and advantages when handling wider workpieces. With three polyester filters, powerful extraction performance, and an automatic filter cleaning system, this booth provides a clean, practical, and economical solution for powder coating operations. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ L-version with extended base frame ✅ Ideal for wider workpieces ✅ Compact solution for professional powder coating ✅ High-performance extraction system ✅ Automatic filter cleaning system ✅ Cost-efficient powder recovery ✅ Customisable with a range of additional options Hnsdpfx Abogf A Shenjr ➖➖➖➖➖ Technical Specifications: ✔️ 3 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning cycle ✔️ Powder recovery container: 30 L ✔️ 1 x 3 kW extraction fan ✔️ Extraction airflow: 3500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust ducting required – with Nano Filter Box! ✨ With the optional Nano Filter Box, your powder coating booth can be operated without connection to an exhaust stack or fixed ducting. This provides maximum flexibility, making it ideal for workshops where a direct exhaust system is not available. Additionally, the booths can be customised and adapted with various options to suit your specific operational requirements. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer a range of financing models to help you plan your investment flexibly. Please contact us for information regarding leasing, hire purchase, or instalment payment options. ➖➖➖➖➖ ✨ Purchase directly from the official European distributor and benefit from superior service and quality! ✨ Proton Maschinenbau provides professional Matech surface technology for industrial applications. Our machines are manufactured to order and supplied as new, unused equipment with a 2-year warranty. Custom dimensions or individual configurations are available on request. We are happy to plan a tailored solution for your workshop. Contact us now – get your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Leto izdelave: 2014, stanje: dober (rabljeno), moč: 260 kW (353,50 KM), barva: rumena, številka stroja/vozila: 214034, Sušilno-sušilna kabina s polnavpičnim pretokom zraka "ITALO-1-SV", znamka Lackro, proizvajalec Eco-Air Technology S.R.L. Italia, leto izdelave: 2014 Notranje dimenzije kabine: dolžina 14,06 m x širina 5,04 m x višina 4 m, maksimalni pretok zraka: 40–45.000 m3/h, toplotna moč: 260 kW, gorivo: dizel, instalirana električna moč: 26 kW trofazno, vključena posoda za gorivo. Kabina je opremljena s posebnim svetlobnim sistemom, 30 zgornjimi filtrirnimi vložki za čiščenje z ogljem, dimenzije 500x500x50 mm, z bočnimi servisnimi vrati, dvoje osrednjih krilnih vrat, voziček za dele, dimnik za gorilnik na dizelsko gorivo; kabina vsebuje navodila za uporabo in vzdrževanje. Pozor kupcem: ta kabina bo dostavljena razstavljena in naložena za transport iz našega sedeža v Oradei. Industrijska sušilno-barvarna kabina "ITALO-I-SV" MOD. ECO – D=14.060 mm x š=5.040 mm x V=4.000 mm s polnavpičnim pretokom zraka Sesalna skupina Sesalno-filtrirna enota ECO-SM-5 Maksimalni pretok zraka pri 250 Pa m3/h: 40.000–45.000 Maksimalna toplotna moč: 260 kW VATRA 232 Vrsta goriva: DIZEL Instalirana trifazna električna moč: kW (2x7,5) + (2x5,5) Filter vložki 500 mm x 500 mm x 50 mm, 30 kosov Vrečasti filter Ø 280 x 1000 mm, 10 kosov Stropna rešetka 975 x 1855 mm, 28 kosov Predfiltri generatorja 1000 mm x 800 mm x 50 mm, 2 kosa Hnedpfx Abep S Tlhonsr Filtri za odsesovalno steno Andreae 0,9 m x 5 m, 3 kosi Maksimalna dimenzija kosa v kabini: D=12 m x Š=3 m x V=3,2 m Za dodatne informacije nas prosimo kontaktirajte po telefonu. Cena: 79.900 EUR + DDV, Ex Works Oradea/Romunija Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Govorimo angleško / Wir sprechen Deutsch / Beszélünk magyarul / Nous parlons français / Vorbim romana

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 250 mm, skupna masa: 650 kg, prehodna širina: 250 mm, The Ceetec A250 is a medium-sized machine in the series of coating machines, making it an ideal choice for use in industrial and manufacturing facilities such as paint shops, joineries, sawmills, or building material depots offering cladding boards, decking, soffits, structural timber, and similar products. The machine is most commonly operated in manual mode, meaning that the workpieces are fed in and removed by hand. Wooden elements are transported horizontally through the machine via an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to 8 rotary brushes, each of which can be individually adjusted. Excess paint is recirculated in a closed circuit through a filter and back to the tank. The closed system ensures optimal paint utilization. The unit is delivered complete with brushes and a bag filter, making it ready for operation after connection to the power supply. As a standard machine, the Ceetec A250 is held in stock and can usually be delivered at short notice. A-series brush coaters are easy to keep clean. All consumable parts, which may wear naturally over time, are available from our warehouses, ensuring excellent availability and quick delivery. Thanks to the modular construction of the machines, the operator of the coater can generally manage most replacement tasks independently. Optional equipment includes various types of brushes, bag filters in different mesh sizes, roller tables, and painting trolleys. When processing raw (unfinished) wood, it is advisable to install a cleaning unit before the machine to remove dust and wood shavings. The device is designed for use with water-based products. BENEFITS OF THE CEETEC A250: - Independent adjustment of brush heads - Application system using low-pressure nozzles and spreading brushes on all four sides of the workpiece - Closed-circuit operation for collection and reuse of surplus coatings - Adjustable feed speed - Option to equip the machine for processing short elements (from 800mm) - Option to install 2m roller tables at both infeed and outfeed Key technical data: Hsdpfjxhc Tmox Abnjnr - Feed speed: from 18 m/min to 42 m/min - Maximum workpiece dimensions: H: 250 mm x W: 250 mm, Length: Min. 2000 mm (other sizes available) - Power supply: 3 x 380 V + PE, IP Class 54 - Dimensions: 2450 mm x 1200 mm x 2000 mm (height) - Net weight: approx. 600 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Naprodaj je komora za solno pršenje za enostavno preverjanje odpornosti na rjo kovinskih delov in premazanih površin. V zaprti komori so deli izpostavljeni finemu solnemu pršenju, da se korozija pokaže v realnih pogojih. Naprava je jasno zasnovana in primerna tudi za uporabnike brez posebnega strokovnega znanja. Komora za solno pršenje je delujoča (še v uporabi) in lepo ohranjena. Ključni podatki so razvidni iz priloženih slik. Hnedpfx Ajx Uz Hhsbnor

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 2.509 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111313, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iA, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It features a very special configuration. It was originally designed for painting wind turbine blades and was installed on a 60-meter rail, which also had an additional rail to allow the robot to move up and down. For this reason, two large auxiliary amplifiers are installed in the controller, and the encoder brake module is present in duplicate. Another unique feature is that engines are installed in the shoulder to control two gear pumps. This enables two-component mixing directly on the robot without difficulty. The robot was never actually used in production. The operating hours only accumulated because the robot was powered on. The operator (Enercon) has also confirmed this to me. The actual servo ON time is only 0.2 hours. The robot has slight soiling, but is otherwise practically as new. Unfortunately, the teach pendant and teach cable are heavily soiled, but they can be replaced if needed. The cable length between robot and controller is 5 meters and it connects to the controller via a plug connection—another unique aspect. We offer a one-year commissioning warranty. We can assist with transport and installation. The robot is secured together with the controller on a special pallet (2500x800x1600mm) and ready for transport. We have two units available. The price is valid per robot. Hjdpfx Abotu Hpqensnr Currently, it is configured as a right-handed robot. However, this can be easily changed without any mechanical modifications. The device can be viewed under power at Paintrobotics.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 92 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 82351, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: RJ3iC, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It comes with a very special configuration. It was originally intended as a spare robot for BMW to be used for clear coat painting of luxury bodies. It has never been used and is therefore as good as new. The robots at BMW operated on a rail. For this reason, the controller is equipped with a large additional amplifier, which is included along with the corresponding motor. The motor can be connected directly to the robot itself, allowing for immediate installation on a slide rail. Another special feature of this robot is that a motor is integrated in the shoulder to control a gear pump, enabling precise dosing directly on the robot. The cable length between the robot and the controller is 2x10m, with connectors at the controller. This means 10 meters of cable through, for example, an energy chain on a rail and then an additional pluggable 10 meters to the controller. This is also a notable feature. We offer a 1-year start-up guarantee. We can assist with transport and installation. Hnjdotu H Avspfx Abnor The robot and controller are mounted ready for transport on a special pallet measuring 2500x800x1600mm. Currently, it is configured as a right-arm, right-hand robot, but this can be changed easily without mechanical modifications. The device is still at our customer's site, but can be powered up and inspected at Paintrobotics if there is serious interest. For this purpose, we would transport the unit from Frankfurt to our facility.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 39.475 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80022, skupna masa: 520 kg, nosilnost: 15 kg, doseg roke: 2.800 mm, vrtilni razpon: 320 °, proizvajalec krmilnikov: FANUC, model krmilnika: RJ3iC, proizvajalec programirnih enot: FANUC, širina krmilne omare: 800 mm, višina krmilne omare: 1.360 mm, vhodna napetost: 400 V, vhodni tok: 20 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 2 mm, This is a paint robot from Fanuc. It was previously used by BMW for clear coat applications on luxury car bodies and, with its 40,000 operating hours, has seen considerable use. The robots at BMW operated on a rail. For this reason, the controller features a large additional amplifier. A second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would be connected directly to the robot. The cable length between the robot and the controller is 10 meters and can be plugged into the controller directly, which is a notable feature. Hjdpfjtu H Hcjx Abnenr We can assist with transport and installation if needed. The unit is mounted together with the controller—ready for transport—on a special pallet measuring 2500x800x1600 mm. Currently, it is configured as a left-arm, left-handed robot. It is equipped with line tracking, but this can be easily changed without mechanical modifications. The device is still located at our customer’s site, but if you are seriously interested, it can be inspected under power at Paintrobotics. We have two units available. For inspection, we would relocate the unit from Frankfurt to our site.

Stanje: novo, Leto izdelave: 2026, A two-zone container, divided into a paint booth and a prep area - External dimensions: 6058 x 2438 x 2591 mm - Internal dimensions: 5538 x 2170 x 2485 mm - Shipping container: 20DV - Door: integrated into the cabin door - Window: with metal security grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use - Paint booth partition wall – fully meshed Control – automatic via external central control unit Power supply – 380 V Supplied with: Eo3il2moj - Fan – 3 kW - Airflow velocity – 0.7 m/s - Airflow rate: 9500 m³/h - Recirculation – closed circuit Hsdpfx Asnbd Rrobnjnr Heating: - Riello 40G20 oil burner - Heat-up time: 10–15 min dkm3db - Maximum temperature: 800°C Filters – pre-filter, paint stop filter, cardboard filter, carbon filter Safety features: - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indicator Equipment: - 16A power socket - Air preparation unit - Pneumatic hose reel

Stanje: novo, Leto izdelave: 2026, A two-zone container, divided into a paint booth and a preparation area - External dimensions: 6058 x 2438 x 2591 mm Hnedpfx Abjnbd Nbener - Internal dimensions: 5538 x 2170 x 2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Window: with metal safety grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use Control – automatic via external central control unit; Power supply – 380 V Equipment supplied: - Fan – 3 kW - Airflow velocity – 0.7 m/s - Airflow rate: 9500 m³/h - Recirculation – closed circuit Heating: - Riello 40G20 oil burner - Heat-up time: 10–15 minutes - Maximum temperature: 800°C Filters – pre-filter, paint stop filter, cardboard filter, activated carbon filter Safety features: - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indication Equipment: - 16A socket outlet - Air preparation unit - Pneumatic hose reel

Stanje: novo, Leto izdelave: 2026, - External dimensions: 6058 x 2438 x 2591 mm - Internal dimensions: 5538 x 2170 x 2485 mm - Shipping container: 20DV - Door: integrated into the cabin door - Windows: with metal security grille - Lighting: 2 LED panels - No assembly required – ready for immediate use Steering – automatic via external central control unit; Power supply – 400 V Equipped with: - Fan – 3 kW - Airflow velocity – 0.7 m/s - Air throughput: 9,500 m³/h - Recirculation – closed circuit Heating – heating capacity 12 kW Filter – pre-filter, cardboard, carbon Safety: - Emergency stop - Pressure lock on door Equipment: - 16A socket outlet Hnodpfsnbd Iljx Abnor - Air preparation unit - Pneumatic hose reel

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. Hedpsdrtanofx Abnsnr The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 12 reviews ✈️ Shipping: 3-4 weeks ✈️ ⭐PLUS VAT & SHIPPING⭐ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✅✅✅Energy Class A+++✅✅✅ ⭐Offer Price €6,220 PLUS VAT & SHIPPING⭐ ►►Buy Now◄◄ ✳️Preserve your liquidity! We offer you a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time: 3-4 Weeks❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ ➖➖➖➖➖ ☘️Eco-friendly☘️⚡️Green Energy⚡️☘️ ✨Powerful ✨ Economical ✨ Efficient ❗❗❗Shortest Lead-Time! Buy Direct from the Manufacturer❗❗❗ ►►►PROTON - WETLINE EX - Spray Booth - EXTRACTION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER: 0.55 KW/H ✔️ FAN CAPACITY: 8,000 M³/H ✔️ CARDBOARD FILTER AREA: 2.6 m² ✔️ FIBERGLASS FILTER AREA: 1.44 m² ✔️ PANEL FILTERS G3: 2 PCS ✔️ PANEL FILTER SURFACE: 1.7 m² ✔️ MANOMETER: YES ✔️ MOTOR CONNECTION: BELT DRIVE ✳️LOW-COST BOOTH SOLUTION✳️ Exhaust/Supply chambers are ideal for converting an area of your factory into a spray painting zone. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We offer a range of exhaust/supply chambers designed to meet your surface finishing requirements while minimising your floor space usage. Our exhaust/supply chambers feature the same construction characteristics as our large industrial booths. Hnedpfx Asc Uthxebnor ✳️ENVIRONMENTALLY FRIENDLY✳️ Each supply chamber meets safety and code requirements — NFPA-33, IFC — to protect both workers in industrial spray environments and those outside. Your extraction/supply chamber is engineered to efficiently remove overspray from the painting process while maintaining a consistent airflow throughout the workspace. ✳️FLEXIBLE & ADAPTABLE✳️ You’ll find our chambers can be designed for both supply modes. Supply chambers are delivered as a package with exhaust fan and motor, while dedicated supply chambers are specifically engineered to accommodate air make-up units. ✳️CNC & CAD TECHNOLOGY✳️ Panels are made from premium 1.5–2.0 mm G-90 galvanized steel, precisely punched at M5 centers for easy nut and bolt assembly, and reinforced to support fan mounting. ✳️QUIET EXHAUST FANS✳️ Typically operate at low dBa sound levels below OSHA limits. ⭐Follow us for new promotions⭐ ☀️2-YEAR WARRANTY☀️ ☀️We provide CE certificates for all our machines and ATEX certification for those requiring it.☀️

Stanje: novo, These units are made of galvanized sheet metal and are designed for complete bolt assembly. This takes up very little space during shipping. The extraction system is developed separately and specifically for each booth, ensuring optimal extraction performance. Thanks to the extraction, personnel applying wet paint are not affected or disturbed by paint fumes. In Elboy Wetline-KF wet paint booths, environmental pollution is prevented by using a combination of accordion, cartridge, or roll glass fiber filtration systems. Wet paint particles extracted from the air by the suction fan are captured by the accordion filter located at the rear of the booth. Hnjdpfxody Dv Ds Abnsr Any residual wet paint particles not retained by the accordion filter are captured by the fiber filter at the rear. The door system can be mounted in various ways at the front entrance. UV lamps can be installed in the cabinet to inspect the painting process.

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) ✈️Item in stock and now available ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✅✅✅Energy Efficiency Class A+++✅✅✅ (Shipping costs on request) *Sales outside the EU only ✳️Safeguard your liquidity! We offer a variety of financing solutions to maximize the success of your investment. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ Hjdpfxec Utdre Abnenr ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Take advantage of Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ✨Effortlessly sprays all powder types, coats complex geometries with outstanding efficiency and quality, and performs reliably even in the most challenging environments. This spray gun set features a reinforced, more stable design. ✨Works with any powder: Today’s challenge is spraying a wide variety of colors and chemicals. PROTON CLASSIC delivers the power and control required to achieve the perfect finish with any powder. ✨Optimal ergonomics: This lightweight, ergonomically designed gun offers better balance and handling, letting you position it comfortably for improved coverage and quicker coating. ✨No matter the conditions: Wherever you operate, the new PROTON CLASSIC delivers perfect coating. Whether in heat or cold, PROTON CLASSIC ensures excellent performance and reliability, dry or humid, in any coating environment. ✨Built to last... Industrial-strength gun design from a single mold, die-cast pump, and a steel-framed cart ensure unmatched toughness and durability, built to withstand any coating environment. All equipment is new, never used. Do you need a custom configuration❗ Call us now❗ ✅WE OFFER CUSTOM SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, MANUFACTURE, AND INSTALL SPECIFICALLY FOR YOU.✅ ☀️ 2-YEAR WARRANTY ☀️ As this website requires information to be submitted primarily in German, this content has been provided in German as the main language. In every country, the text is shown in its respective national language. This product is sold only outside of Europe.

Stanje: novo, Leto izdelave: 2026, trajanje garancije: 12 meseci, skupna širina: 2.300 mm, skupna dolžina: 1.300 mm, skupna višina: 2.450 mm, vrsta vhodnega toka: trifazni, Powder booth, painting wall, extraction unit TQN2020 Working dimensions (mm): 2000 (W) x 2000 (H) x 400 (D) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) Hoded S N Szspfx Abnsnr SPECIFICATION: • Fan output 2.2 kW • Capacity 10,500 m³/h • 3 x 100% polyester filters • Filtration efficiency of 99.9% • Control panel IP 66 • Automatic filter cleaning • Hermetically sealed lighting IP 65 • Powder reservoir Cabin available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines compared to products available on the market. Professional advice and service. Warranty. In-warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. brand products are EC-certified. We provide our own transport – prices are set individually for each offer. We issue invoices with VAT stated separately. Short delivery times! Option to order machines in various, custom configurations and dimensions! Please contact us.

Stanje: novo, Leto izdelave: 2025, vrsta vhodnega toka: trifazni, skupna masa: 450 kg, skupna višina: 2.500 mm, skupna širina: 4.200 mm, Oprema: osvetlitev, The company BUMEX SP. Z O.O. presents a powder coating booth. Working dimensions: 4,000 x 2,200 mm 5 filters Automatic filter cleaning with adjustable interval from 10 to 1,200 seconds Fan: 2 x 2.2 kW, 9,500 m³/h each = 19,000 m³/h total 2 x LED lamp Delivery time: 14–21 days Our booths stand out due to their very high build quality, operational safety, and the customization of booth parameters to fit your requirements. We provide expert consultation on the selection of paint booths, dust extraction systems, extraction units, and industrial heat recovery systems. CHOOSE BUMEX SP. Z O.O. - Very high quality of machines offered on the market - Professional advice and support - Warranty - Warranty and post-warranty service - Complete technical documentation - 100% customer satisfaction - All BUMEX SP. Z O.O. products have the WE certificate We offer our own transport—prices are arranged individually per offer. We issue invoices with VAT separately listed. Hsdpfx Abohfwy Hjnenr Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2025, An ideal coating set for car rims, motorcycle frames, and other smaller items, featuring a rail system and trolleys. Powder Coating Oven 1500 x 1500 x 1800 mm Powder Coating Booth 2000 x 1800 mm Oven/Dryer Technical data: Working dimensions: 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230°C Hjdpfjd S N R Usx Abnenr Equipment: • Internal trolley • External cart • Convection heating (uniform temperature distribution throughout the oven) • Safe opening and closing locks Powder Coating Booth: Working dimensions: 2000 x 1800 mm Fan power: 2.2 kW Airflow: 10,500 m³/h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. High-quality machines among those available on the market. Professional consulting and service. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are CE-certified. We offer our own transport – prices are quoted individually for each offer. We issue invoices with shown VAT. Short delivery times! Machines can be ordered in various custom configurations and dimensions! Please contact us.

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.600 mm, skupna širina: 2.200 mm, skupna višina: 2.350 mm, skupna masa: 250 kg, vrsta vhodnega toka: trifazni, delovna širina: 1.400 mm, Paint booth, paint wall, extraction unit TQN1414 With right- or left-handed exhaust outlet. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power: 1.5 kW • Airflow capacity: 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency: 99.9% • IP66 control panel • Automatic filter cleaning • Hermetically sealed lighting, IP65 • Paint tank Cabin available immediately (in stock) WHY CHOOSE BUMEX SP. Z O.O.? High-quality machines among the best on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are EC certified. We offer our own transport – prices are determined individually for each offer. We provide VAT invoices. Hodpfx Abod S N I Njnenr Short delivery times! Possibility to order machines in various custom configurations and dimensions! Please contact us.