Presto Gmbh & Co. Kg Balairka nakup rabljenega (101.979)

Stanje: novo, Leto izdelave: 2025, Kontejnerska peskalna naprava. 5,89 x 2,35 x 2,69 m Ledodkbvcspfx Al Njrk Kontejnerske peskalne naprave z vgrajenim strojnim prostorom. Plosko transportno dno, polžasti transportni sistem, vedro dvigalo, priprava abraziva, tlačni peskalni kotel 100l, filtrirna naprava, odsesovalno dno, odprtina kot ročna peskalna kabina. Za morebitna vprašanja o tehničnih podatkih nas kontaktirajte pisno ali po telefonu. Osnova strojev je proizvodnja na lokaciji Grossenlüder od leta 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG z dolgoletnimi priznanimi kontakti. Slike lahko vsebujejo dodatno opremo.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Lrodpfjuwlzyex Al Nok Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years included on all essential components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: novo, Leto izdelave: 2025, Tumble belt shot blasting machine with an 11 kW direct-drive impeller wheel featuring 8 throwing blades. Belt width: 1000 mm, diameter: 900 mm. Lodpfx Aehvikuel Nsrk

Stanje: novo, Leto izdelave: 2025, Blasting container with HC 20-foot crane runway. Includes screw conveyor floor, bucket elevator, air classifier, vibrating screen, abrasive storage bunker, blasting unit with accessories, extraction wall for abrasive recovery, filter unit with pre-separator chamber, 4mm fabric-reinforced rubber lining, lighting, emergency lighting, door limit switch, viewing window, Siemens Logo electrical control, 500kg crane runway with structural analysis and initial commissioning, CE marking with operating manual. Lrsdpfx Asiqnrvjl Nek

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Lrodpowxlygsfx Al Nok

Stanje: novo, Leto izdelave: 2025, Injector gravity trough conveyor blasting system for blasting series parts with glass beads, corundum, ceramic beads, etc. Due to the gravity system, the machine achieves 15-20% higher blasting performance compared to a simple injector blasting system. The unit is equipped with a bucket elevator and an air-wash system for abrasive cleaning. Up to 20 programs can be stored for different blasting applications. Ledehunz Nopfx Al Nerk

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 15.15.20.RB75, available with or without roller conveyor. Blasting chamber dimensions: W=1150, D=1150, H=930 mm. Includes one TÜV-certified 20L pressure vessel with conical outlet hopper. One abrasive dosing valve with pneumatically controlled abrasive quantity regulation. Integrated sealing cone with guide tube. One compressed air connection with pneumatic shut-off valve and branch for control air. One pressure regulator for adjusting the blasting pressure. One blasting hose DN19. One handpiece with boron carbide venturi blasting nozzle, 8mm. One pair of blasting gloves. Dust extraction filter unit, capacity 2000 m³/h, 2.2 kW. Lrsdpfega I R Eex Al Nek

Stanje: novo, Leto izdelave: 2025, Blast container with craned hatch and reinforced floor. Dimensions: 5.89 x 2.35 x 2.69 m. Suitable for all commercially available blasting media such as cast steel grit, corundum, garnet sand, glass beads, ceramic beads, etc. Container blasting systems with integrated machine room. Flat conveyor floor, screw conveyor floor, bucket elevator, media recycling unit, vibrating screen, magnetic drawer, drum magnetic separator, 100 L pressure blasting pot, filter system, extraction floor, opening for use as a manual blasting booth. Equipped with LED and emergency lighting. Cartridge filter system and airborne dust filter included. For technical inquiries and further information, please contact us in writing or by phone. All machines are manufactured at our Großenlüder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-established, well-known contacts. Images may show optional equipment. Lredpfx Ajfin Iyjl Nsk

Stanje: novo, Leto izdelave: 2025, Blast cabinet DSK 1102 S with movable carriage and rotary table. Lodpfsdhl Ngox Al Nork Width: 1500 mm, Depth: 1235 mm, Height: 995 mm Pneumatic lifting door. If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our site in Grossenlueder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known points of contact.

Stanje: novo, Leto izdelave: 2025, Turbine rotary table system Diameter: 1500 mm; 2 x 7.5 kW blast wheels If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known contact persons. Lrodpfx Ajdtq Anel Nsk

Stanje: novo, Leto izdelave: 2025, Extraction floor, waffle floor for mineral blasting media, approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known contacts. Lsdpedz Ayvjfx Al Nsrk

Stanje: novo, Leto izdelave: 2025, Blast wheel machine, suspended rail type 1.15 2T Working area: Diameter = 1000 mm, Height = 1500 mm, Payload = 500 kg Equipped with 2 blast wheels, each 7.5 kW, including filter system and airborne dust filter. For questions regarding technical specifications, please contact us in writing or by phone. Ljdpfx Ajdrr U Ssl Nsrk The foundation of our machines is the manufacturing facility at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Stanje: novo, Leto izdelave: 2025, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Lredpfjhc T Nlox Al Nek

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Lredpfx Aeu Ey Dlsl Nok Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Tumble belt blast machine with blast wheel – 7.5 kW direct-drive disc turbine with 8 throwing blades. Belt width 700 mm and diameter 600 mm. Ledog S Rt Eopfx Al Njrk

Stanje: pripravljen za uporabo (rabljen), Najemni zabojnik za peskanje, dolžine 20 čevljev, s tlačno peskalno napravo, filtrirno enoto in varnostno opremo Ledpfexl Dq Uox Al Nsrk

Stanje: novo, Leto izdelave: 2025, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lrsdpfjw Ivqmjx Al Nek Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Lsdpfx Aox A U Ncol Njrk Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result Ljdpsndn Agofx Al Nerk • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) Lrodpfeng Exaox Al Nek • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Leto izdelave: 2008, stanje: dober (rabljeno), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Lrodpfelrt Saox Al Nok Ex location, for self-dismantling Dismantling and loading services available on request

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Lrjdpjvtpq Hjfx Al Njk Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Leto izdelave: 1992, stanje: rabljeno, Plate heat exchanger for milk processing Lredpjh Eulgjfx Al Njk

Leto izdelave: 2020, stanje: novo, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year 2020 – NEW / Unused Short Description For sale are unused, originally packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in factory-new condition, have never been operated, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of manufacture 2020 Serial number including 032003303920 (additional serial numbers available) CE marking Yes Condition New / unused Originally packaged Never installed, never operated Stock item Quantity available 4 identical machines available New price New price €94,000 per unit Lrodpjx Ihufjfx Al Nek (Total new value for 4 machines: €376,000) Design / Material Completely stainless steel Plate and frame filter press Gasketed plates Pharma/Biotech version Hydraulic closure incl. hydraulic unit CE compliant Technical Data Plate size: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Frame weight: approx. 480 kg Plate package weight: approx. 120 kg Plate Package 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter sheets per setup Hydraulics & Drive Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlet and outlet DN25 Vent/Drain DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Viewing available by appointment Immediately available

Leto izdelave: 2003, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03234, Stroj za odstranjevanje oksida s 6 krtačami (3 pari) za jekleno žico premera 5,5–16,0 mm (nizkoogljično jeklo). Pari krtač so razporejeni s 60-stopinjskim zamikom za maksimalen učinek. Zelo čist in urejen stroj. Priporočamo ogled in pregled na lokaciji. Lodpfxsx R Uzde Al Nsrk