Omejevalnik Temperature nakup rabljenega (7.337)

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Temperirna naprava teco th 140 podjetja GWK z indirektnim hlajenjem je na prodaj; na zahtevo vam lahko posredujem številne zmogljivostne podatke, ki so na voljo. Priložene so tudi cevne povezave. Napravo bo pred dobavo preverilo podjetje GWK, stroški pregleda so že vključeni v prodajno ceno. Giodpfox Dcd Rox Ahmju Medij: Termo-olje, Marlotherm SH Ogrevalna moč: 27 kW pri maks. 350 °C Hladilna moč, indirektno: 110 kW Črpalka: 150 l/min pri maks. 7 bar Hlajenje v obtoku preko 3-potnega motornega regulatorja Zaporni ventil na UV in UR Možnost priklopa za PT 100 tipalo Notranja kapljična posoda Dolžina: 1320 mm, širina: 570 mm, višina: 1720 mm, teža: 410 kg

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations. Gjdpfxofnvwqs Ahmsiu

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Gisdpfjg Ey Rfjx Ahmeu Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Gisdpfsftm Hrsx Ahmou *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit Godpjfnvvisfx Ahmeiu - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Giodpfjg Ey Ufox Ahmeu Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system Gijdpfxeg Ey T Ej Ahmsu - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring Gedjg Ezaropfx Ahmoiu - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW Gedjg Ewwrepfx Ahmjiu *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW *Dimensions: - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprave izvirajo iz orodjarne, zato so bile zelo malo v uporabi. Stroj ENGEL ima le 6.520 delovnih ur. Temperirne naprave so bile uporabljene v istem obsegu in imajo največ približno 7.500 delovnih ur. Cena: 3.450 € na kos. Na voljo sta še 2 kosa. Ob nakupu obeh naprav prejmete izvedbo z veliko črpalko – z maksimalno močjo pri hlajenju, gretju in pretoku – za samo 6.500 €. Gsdpsxk Txxefx Ahmeiu

Stanje: rabljeno, Na voljo so 3 temperirne naprave podjetja GWK; Temperirna naprava CS 90 z zaslonom na dotik - temperaturno območje max. 90°C voda - robustno ohišje iz jeklene pločevine - naprava na kolesih - grelna moč 9 kW - avtomatsko dolivanje vode - električna kontrola nivoja - indirektni hladilni sistem, hladilna spirala Gjdpfx Aoy T D Nvehmsiu - priključni kabel s 16 A CEE vtičem

Leto izdelave: 2005, stanje: rabljeno, Ročno nastavljanje dolžine z ročnim kolesom in digitalnim prikazom Gsdpfx Ahsy N Dcbsmjiu

Stanje: pripravljen za uporabo (rabljen), FluidX HT121TS je polavtomatski segrevalni zapiralec folij, zasnovan za zapiranje laboratorijskih plošč. Ključne tehnične specifikacije Vrsta naprave: Polavtomatski segrevalni zapiralec folij. Teža: Približno 5 kg (neto). Uporaba: Uporablja se za termo zapiranje mikroplošč, običajno v kombinaciji s FluidX epruvetami za shranjevanje vzorcev. Združljivost formatov: Zasnovan za obravnavo različnih formatov plošč, ki se pogosto uporabljajo v avtomatiziranih delovnih procesih. Operativne značilnosti Nastavljiva temperatura: Podpira različne temperature za raznolike materiale za zapiranje. Ročna/polavtomatska integracija: Združljiv tako z ročnimi nalogami nizke pretočnosti kot tudi z visokozmogljivimi avtomatiziranimi skladiščnimi sistemi. V dobrem delovnem stanju. Oglejte si tudi naše ostale oglase. Gjdpfx Ahoy D D Umsmoiu

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna masa: 50 kg, vrsta vhodnega toka: trifazni, moč: 12 kW (16,32 KM), leto zadnje generalne obnove: 2026, Tip: TP-DIRECT: 120 Moč: 12 kW Maksimalna delovna temperatura: 120 °C Medij: voda Tlačna temperirna naprava Na voljo so trije kosi Giedpfjy Uvwbsx Ahmeu Cena: 700 EUR na kos

Stanje: dober (rabljeno), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Gsdpfx Ajy N Awqohmoiu Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant as per labelling: R452A – approx. 1.2 kg Features: Touchscreen control Program and constant operation modes Temperature and humidity operation Observation window in the door Stainless steel test chamber Interior illumination / chamber lamp Side cable/tube port Ø approx. 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used unit with age- and use-related wear. Some rust and corrosion present in the lower housing area. Interior with signs of use. See photos for optical condition. Scope of delivery: ESPEC climate test chamber PL-3KPH Shelf included Delivery as pictured Service: Functional check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by appointment. Loading can be organized. Commercial sale – sold without warranty. Subject to change and error.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Several Tool-Temp controllers are available for sale. Gijdpev E Uirsfx Ahmsu

Stanje: zelo dobro (rabljeno), Binder temperature test chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclical temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in the range of -40 °C to +180 °C and offers an efficient alternative to custom-tailored solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: Godpey Nic Hjfx Ahmsiu approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x cable ports Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Nominal voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following checks and procedures are carried out on all our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented trial run. Condition: Used Scope of delivery: Delivery contents as shown in the images Inspection possible by appointment. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Stanje: zelo dobro (rabljeno), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale: Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in a range from -40°C to +180°C, providing an efficient alternative to custom-built solutions. Technical Specifications: Temperature range: -40°C to +180°C Test chamber volume: approx. 228 liters Temperature Performance Data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cool-down time from +180°C to -40°C: approx. 110 minutes Test Chamber: Internal dimensions: Approx. 735 x 700 x 443 mm (W x H x D) Dimensions: Giodpsy Nicmsfx Ahmou External dimensions: Approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x cable ports, Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of Delivery: Scope of delivery as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sale without warranty. (Subject to technical changes and errors)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, leto zadnje generalne obnove: 2024, skupna višina: 220 mm, skupna dolžina: 720 mm, skupna širina: 380 mm, vrsta vhodnega toka: Klimatska naprava, Temperirna naprava Jufeba TG 1-3 T Model Jufeba: TG 1-3 T Namizna izvedba s posodo Iz nerjavečega jekla Gedpfx Ahexvk Hdsmjiu Suho gretje Ročna regulacija temperature Robustna tehnologija Priključek 230V Rabljena oprema, očiščena in preverjena (SAB) Z garancijo in servisom rezervnih delov Na zalogi imamo še veliko drugih temperirnih naprav!

Leto izdelave: 2000, stanje: dober (rabljeno), Number: 0107058 Cooling capacity: 1,100 W at +6°C Cooling capacity: 1,270 kcal/h at +6°C Gisdohri Ahepfx Ahmou Maximum temperature: 44°C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Weight: 80 kg

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber Model: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for thermal cycling and shock testing in industrial, research, and development settings. Technical Data: Test chamber volume: approx. 32 liters Maximum specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Gjdpoy I Ntcofx Ahmeiu Temperature transition rate: up to approx. 100 K/min Transition time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Nominal power: approx. 9.7 kW Nominal current: approx. 15.4 A Fusing: 16 A slow-blow Protection class: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: Approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: Approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male thread Equipment: Two-chamber system (hot / cold chamber) Digital CTS controller Display / control panel Program operation Operating hours counter Viewing window Internal lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick instruction available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as shown in the pictures Scope of delivery as depicted Inspection by appointment is possible. Loading can be arranged. Commercial sale. Sale without warranty. (Subject to changes and errors)

Stanje: zelo dobro (rabljeno), Backstop / Pallet Stop – Wholesale | Jungheinrich We offer pallet stops (backstop / pallet stop) for pallet racking systems – a key safety component for warehouse storage. Perfect solution for: - high-bay warehouses - logistics centers - production halls 🔧 Specification: - Length: 2750 mm - Colour: yellow (Jungheinrich) - Material: steel - Condition: very good (dismantled) - Delivery: in sections (easy transport and assembly) 🛡️ Application: Backstops mounted at the rear of racking systems: - prevent pallets from being pushed through - protect the racking structure and walls - enhance operator safety 👉 A must-have for warehouses operating with forklifts, especially in high-traffic environments. 📦 Wholesale: Available in larger quantities – ideal for: - upgrading existing installations Gedoy Enaiopfx Ahmsiu - new warehouse projects - service providers and installation companies Possibility to prepare sets tailored for specific racking systems. ➕ Also available: - pallet racking (STOW, DEXION, MECALUX, AR Racking, Jungheinrich) - wire mesh shelves (300 / 500 / 1000 kg) - upright protectors, bumpers - spacers for double racks - other warehouse accessories 🚚 Logistics: - collection in person or transport (to be agreed) - possibility to prepare sets according to project 📞 Contact us – we will prepare an offer tailored to your warehouse or investment.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310368, Tip: P160/9/SG51/1K/RT45 Moč: 9,6 kW Gisdpfx Ajy Aghyjhmou Maksimalna obratovalna temperatura: 160 °C Medij: voda Tlačna temperirna naprava Na voljo sta dva kosa Cena: 1.050 EUR na kos

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Demontirano iz delujočega stroja Gijdpfey Txfrex Ahmju 4 kosi v ohišju s kablom

Stanje: dober (rabljeno), Cold conductor relay, contactor, solid-state contactor, relay, isolation amplifier, temperature transducer - Manufacturer: Phoenix Contact, PT100 temperature monitor - Model: MCR-SL-PT100-SP - Price: per piece - Quantity: 7 units - Dimensions: 100/13/H115 mm - Weight: 0.1 kg/unit Gisdpfxef Ir D Ae Ahmou