Enota za nadzor temperature

REGLOPLAS P140 M

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 17.000 h, vpenjalna sila: 220 kN, premer vijaka: 50 mm, Year: 2018 Control type: CC300 Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: Available Clamping force: 220 t Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Minimum/maximum mould height: 250/600 mm Maximum daylight: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20:1 Shot volume: 432 cm³ Max. injection pressure: 2,002 bar Motor power: 29 kW Heating power: 15.3 kW Weight (clamping unit): 11.3 t Ffodpfxevtm Uis Aflst Machine dimensions (L x W x H): 6.30 m x 1.80 m x 2.10 m Core pulls: No Robot interface: Yes Bi-metallic screw: Yes

Stanje: rabljeno, Leto izdelave: 2019, Year: 2017 Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Fsdpfx Afsv I Uw Iolsft Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Platen dimensions: 760 mm x 760 mm Mould height min/max: 250/600 mm Max distance between platens: 1060 mm Screw diameter: 35 mm Screw length: 20D Shot volume: 154 cm³ Max injection pressure: 2000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Machine dimensions (L x W x H): 5.90 m x 1.70 m x 2.20 m Core pull: NO Robot interface: YES Bi-metal screw: YES

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing Ffjdpfxeddv Ite Aflot - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) Only 17,000 hours in automatic cycle! Technical Main Parameters: Clamping force: 10,000 kN Opening stroke: 1,220 mm Minimum mold height: 500 mm Maximum mold height: 1,160 mm Daylight between platens: 2,380 mm Tie bar spacing: 1,160 x 1,160 mm Platen size: 1,650 x 1,700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2,721 cm³ Shot weight (PE): 1,986 g Injection speed: 544 g/s Max. injection pressure: 2,280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50,000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pulls (4x fixed platen, 4x moving platen), with servomotor 432 – 8x core relief Ffjdjwtgltjpfx Aflet 662E – 16x integrated hot runner zones 623 – Acoustic alarm 237C – Safety clamping force sensor 430C – 8x pneumatic cascade control Cylinder and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 pipes + hoses + cable ducts + valves + filters + nozzles + assembly, all per Lamky specification (Stäubli quick couplings) Total power sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core pull circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 32.827 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 230239, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2 letvica, injekcijska masa: 184 g, skupna masa: 11.200 kg, Here we, as a trading company specializing in injection molding machines, offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been wholesalers of used injection molding machines for over 25 years. Important information – Tax advice and benefits for used machinery: From 01.07.2025, used machines are also eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to new machines, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Arburg 1500T 2000-400 rotary table vertical machine Machine serial no.: 230239 A full list of equipment can be found in the downloadable documents - machine card Controller: Selogica Year of manufacture: 2014 * Total machine cycles: only 1,469,728 * Automatic operating hours: 32,827 h Clamping Unit Distance between platens: 700 mm Clamping force: 200 t/2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotating axis: 180° Rotational speed: min. 2.4 s Weight on rotary table: 1,050 kg Ejector force: 45 kN/175 mm ejector stroke Injection Unit Screw diameter: 40 mm Injection volume: 201 ccm Shot weight: 184 g Injection pressure: 2,000 bar Extras - 2-station 180° rotary table, alternating forward/backward, with servo-electric drive and hydraulic locking pin for precise centering at end position; safety separation between clamping and loading areas, height-adjustable on the turntable to match lower mould halves, with provision for media lines and connections for lower mould halves - Rotary table diameter: 1500 mm - Max. clamping force: 2,000 kN - Injection unit according to EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table model with following features: - Corrosion protection treatment for rotary table (VE 574/90) - 2-circuit water connections - 3 hydraulic connections for needle shut-off system - 3 x core pulls - Per station: 1 core pull and 2 temperature control circuits - 6 x mould temperature control - 12 zones for mould heating circuits - Kistler cavity pressure sensors (2x) - Temperature monitoring for start-up parts Weight: 11,200 kg Power: 22 kW motor – heating power: 9.4 kW, 5 zones – connected load: 100 A Fedsuuf Iaopfx Afloft The machine is offered after functional testing, fully operational, with commissioning warranty – tested before dismantling. Information about our offered machines and our company: - We only sell machines purchased from active production, stored at our Hanover warehouse - All machines are checked and tested before dismantling - We do NOT sell insolvency lots – we are NOT an intermediary dealing in third-party property - All machines offered come from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Stanje: novo, Nova naprava MASS International NS3 Speciale Kotna transportna naprava z ločevalnikom Fjdpfxjd Tidxs Aflsft hitro dobavljivo Primer kot na sliki: L-transportni trak z dvojnim valjčnim ločevalnikom Vnosni del 600 mm Vzpenjalni del 1300 mm Uporabna širina 450 mm Zunanja širina 505 mm (brez motorja) Višinsko nastavljiva odložna višina 750 - 1050 mm Nastavljivi kot v vnosnem delu kot tudi pri naklonu PU pas črn s prečkami Višina prečke 20 mm Razdalja med prečkami 500 mm Hitrost pasu 3 m/min Premičen na vrtljivih blokirnih koleščkih Stranske lovilne pločevine v vnosnem delu Na voljo tudi kot kotni transportni trak s supergrip pasom in ločevalnikom (glejte zadnji dve sliki) Dvojni valjčni ločevalnik s pokritim pasnim pogonom obložen s Super Grip nastavljiv izmetni žleb

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Years: 1x 2011 1x 2006 2x 2008 Fodpfx Aou Ap Twjfloft (It is possible to purchase 6 units)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used UV LED flatbed printer "Mimaki UJF-7151 plus II" Item for sale: 1 x Mimaki UJF-7151 plus II with the following specifications: - Manufactured in 06/2021 Fjdowfqbispfx Afljft Condition: This offer is for a pre-owned device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video prior to shipping or collection. For further information, please feel free to contact us directly.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Schließkraft: 900 t Ffodpfsv D U Hnjx Afljt Schnecken-Durchmesser: 90 mm Schussgewicht: 1.576 g Holmabstand (vertikal): 1.000 mm Holmabstand (horizontal): 1.180 mm Schussvolumen: 1.732 cm³ Bauart: Horizontal Antrieb: Hydraulisch

Stanje: novo, New machine MASS International Conveyor Belt NI 1 Belt Conveyor/Discharge Conveyor Ffjdpoh Nyp Usfx Afljt Angle-adjustable conveyor belt with hopper at the feed section Available at short notice Example configuration: NI 1 Length: 1,500 mm Usable width: 250 mm External width: 305 mm (excluding motor) Height-adjustable discharge height: 600 - 1,000 mm Incline angle adjustable Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel castors with locking brakes Options: Dimensions available as per customer specifications FDA-compliant belt Customised belt speed etc.