Naprava Za Perforiranje nakup rabljenega (88.705)

Stanje: rabljeno, Leto izdelave: 1993, Pregled Ta vročelepilni etiketirni stroj za vnaprej izrezane papirnate etikete je bil izdelan leta 1993 pri italijanskem podjetju PE LABELLERS. Stroj je namenjen etiketiranju PET steklenic. Proizvodnja je bila ustavljena julija 2009 zaradi dokončnega zaprtja obrata. Stroj je še vedno nameščen na lokaciji in si ga je možno ogledati na zahtevo v mirovanju. Takoj je na voljo. Tehnični podatki - Zmogljivost: pribl. 7.200 steklenic na uro Bwodpfxjy Hmtws Agqop - Formati: 1,5 l / 2,0 l - Uporaba: PET - Konfiguracija: vročelepilni etiketirni stroj za vnaprej izrezane papirnate etikete

Stanje: rabljeno, Leto izdelave: 2022, Pregled Ta naprava za karbonizacijo je bila izdelana leta 2022 pri nemškem podjetju KH TEC. Stroj je zasnovan za karbonizacijo piva. Naprava je izklopljena, vendar je še vedno v stanju, primernem za proizvodnjo, in je opremljena s HMI-vmesnikom ter avtomatiziranim delovanjem. Na voljo je takoj in je možen ogled na zahtevo. Stroj se prodaja, ker bo zamenjan z novim sistemom. Tehnični podatki - Kapaciteta: 20 HL/uro - Uporaba: Pivo - Konfiguracija: Avtomatizirano, nadzor z HMI Bwsdpfx Aoyk Ab Djgqep

Stanje: rabljeno, Leto izdelave: 2009, Pregled Ta celovit sistem za komprimirani zrak je bil proizveden med letoma 2009 in 2013 pri podjetjih Atlas Copco (Švedska) in Donaldson Filtration GmbH (Nemčija). Sistem vključuje dva nizkotlačna kompresorja Atlas Copco GA132 VSD, hladilni sušilnik zraka Atlas Copco FD160 VSD in oljni separator Donaldson UFA-AC0016. Sistem je zasnovan za zanesljivo in energetsko učinkovito oskrbo z zrakom do 8,5 bara in je idealen za neprekinjena proizvodna okolja. Sistem je bil redno vzdrževan, zadnje celovito vzdrževanje je bilo opravljeno avgusta 2025, in je v dobrem delovnem stanju. Celoten sistem je še vedno vgrajen in priključen ter je takoj na voljo za ogled in prodajo. Tehnični podatki - Letniki: 2009 – 2013 - Uporaba: Industrijski sistem za komprimirani zrak - Skupna zmogljivost: 2 × 24,1 m³/min - Najvišji tlak: 8,5 bar - Priključna moč: 274,8 kW Obseg dobave - Kompresor | Atlas Copco | GA132 VSD | 2013 - Kompresor | Atlas Copco | GA132 VSD | 2012 - Hladilni sušilnik | Atlas Copco | FD160 VSD | 2012 - Oljni separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Bedpfx Agoxrc Aceqewp

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: Bodpfxoym Unzj Agqjwp - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: zelo dobro (rabljeno), Prodajam profesionalno napravo za nastavitev batnih merilcev SUBITO – Schwenk ESU. Zelo dobro ohranjena, komplet v originalnem lesenem kovčku z navodili. • Model: SUBITO Einstellgerät ESU • Proizvajalec: Oskar Schwenk GmbH, Nemčija • Popolna oprema • Stabilno litoželezno ogrodje • Natančna nastavitev in mikrometrično pomikanje • Idealno za nastavitev batnih merilcev SUBITO, ESS, ESU • Vse skupaj kot novo. Bsdpsx A Ia Ijfx Agqjwp

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Profesionalna pnevmatska naprava za praznjenje kartuš in posod SEMCO 600 ml, namenjena za industrijsko uporabo (lepila, tesnilne mase, paste, viskozni materiali). Podatki proizvajalca: • Proizvajalec: axiss GmbH (Nemčija) • Tip: 9110 / B-SEMCO600-PN-KM-F • Leto izdelave: 2023 • Serijska številka: 514 • Standard kakovosti: DIN EN ISO 9001:2015 • CE oznaka Tehnični opis: • Pnevmatsko praznjenje kartuš SEMCO 600 ml • Trdna konstrukcija na montažni plošči iz aluminijastega profila • Batni sklop s prozorno tulko (nadzor položaja) • Regulator tlaka z manometrom • Krmilni ventil za smer delovanja • Pnevmatske hitre spojke • Izklopni ventil (varnost) Bsdpfoyc Nzusx Agqjwp • Možnost navpične ali vodoravne montaže • Gladko in nadzorovano delovanje

Stanje: zelo dobro (rabljeno), Device for precise setting, measurement, and inspection of CNC cutting tools. System equipped with EZset optical camera and EZvision software (Image Controller 1). In very good condition, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axis: up to 400 mm • Camera with image processing system • Tool edge, length, and diameter measuring functions • Data saving and printout capability • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture approx. 2018–2019 • Complete with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal / transverse axes reference properly • Well-maintained unit from a German tooling facility Bwsdpfx Agoxn Awxeqjp Functional description: PRECIsset 400 enables fast and repeatable setup of tools before CNC machining. The EZset vision system allows for blade geometry analysis and tool wear monitoring. High measurement accuracy is ensured by a stable column and industrial-grade optics.

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Readout system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English • Supplied with original documentation and complete set of connectors Condition: • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: Bwsdpsxn Ax Aofx Agqsp The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: zelo dobro (rabljeno), Kübrich Test Systems 48V Belt Starter Generator - Component Test Stand Details of the Test Stand: (See Image 13) Frame with (1) Mounting fixture for a belt starter generator Bjdpfx Agjzhkb Seqjwp (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for system control, handover panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Handover box Intended Use: The test stand is designed to perform tests on belt starter generators during development. Technical Data: Electrical Connection Data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage: 24 V Mechanical Performance Data according to the load machine’s datasheet Note: There is a 1:2 transmission ratio to the DUT (device under test) shaft. Speeds: Load machine: Setup mode: 0 - 50 rpm Automatic mode: 0 - 10,000 rpm Test object motor: Setup mode: 0 - 100 rpm Automatic mode: 0 - 20,000 rpm Dimensions and Weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (See Image) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Stanje: skoraj kot novo (rabljeno), Količina: 4 kosi Teža: 3,8 kg/kos Dimenzije D-Š-V: 180 x 70 x 90 mm Gradbeni element B50 – (št. artikla Zadrževalna sila 50 kN) Ta gradbeni element iz visoko trdnega aluminija je pri spremenljivih višinah vpenjanja idealna dopolnitev vpenjalnim elementom serije MQ in deloma serije S. Področja uporabe: tehnologija preoblikovanja in tehnologija odrezavanja. Bwodpfezdk Epsx Agqsp --> Višina = 90 mm --> Dolžina = 180 mm Cena na kos, popust pri večjem naročilu.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 500 kg, Stolpna dvižna vrtljiva naprava 500 kg nosilnost Pozicioner Sideros Syncrolift dvojni steber Daljinsko upravljanje (brezžično) Leto izdelave 2024 Nosilnost 500 kg Minimalna delovna višina: 1000 mm Maksimalna delovna višina: 1500 mm Bwjdpfx Agjuk Niasqsp Hitrost 1 obr/min Navpično pomikanje 500 mm Premer vpenjalne plošče 500 mm Pogonski motor za vrtenje 0,4 kW Dvižni motor 2 x 0,6 kW Na voljo so različne stolpne dvižne vrtljive naprave: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Zahtevajte ponudbo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, nosilnost: 10.000 kg, Special price: 6 months used, as new, with warranty. Self-centering complete set, dual drive, synchronous operation. Includes hand remote control with digital display and foot remote control. Suitable for diameters from 300 mm to 3500 mm. Bwodpfxow D Rhas Agqsp Drive roller diameter: 300 mm. Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm. Infinitely variable speed: 200 - 1200 mm/min. Motor: AC 380 V.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 30.000 kg, Oprema: nožno daljinsko upravljanje, 30 tons load capacity, self-centering, new 380V Hand and foot remote control Rotation speed: 100 – 1000 mm/min Diameter range: 600 – 4500 mm Drive wheel diameter: 350 mm x width 180 mm Material: heat-resistant, non-slip PU Bwsdjwrpfgjpfx Agqep Dimensions: 2350 x 1460 x 1050 mm Dual drive, synchronized

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, 1200 kg load capacity welding positioner, CE-certified Very robust construction Infinitely variable speed adjustment from 0.05 to 0.7 rpm Turntable diameter: 1200 mm Tilting angle up to 120° Height in horizontal position: 1,050 mm; tilted to center: up to 880 mm Hand and foot remote control Bsdpfx Ajlamr Esgqswp Dimensions: Length 1.35 m x Width 1.2 m

Stanje: kot nova (razstavni stroj), Rotator für Behälter, Schweißtisch, Schweißdrehtisch, Rollenbock Bwodpfx Agod An Aajqjp Tragfähigkeit: 3000 kg Mit Fußfernsteuerung Geschwindigkeit stufenlos einstellbar: 80 bis 1600 mm/min Werkstückdurchmesser: 40 mm bis 1400 mm Rollendurchmesser: 200 mm Abmessungen (L x B x H): 800 x 370 x 450 mm Modell- oder Farbabweichungen möglich

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, self-centering complete set, double-drive, synchronized with handheld remote control with digital display and foot remote control diameter range from 300mm to 3500 mm drive roller diameter 300mm x 120mm dimensions: length: 1900mm x width 470mm x height 390mm stepless speed adjustment 100 - 1200 mm / min. motor AC 380 V load capacity 10 t Bwjdev En D Nepfx Agqop total power requirement 1.1 kW self-aligning for multiple diameters steplessly adjustable speed of the drive unit polyurethane coating on rollers, heat-resistant optimum load distribution (4 rollers/unit), especially gentle for workpieces with thin walls and sensitive surfaces remote control with cable and dual foot pedal CE certificate

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Container rotating device, rotating device Length and axle spacing adjustable Bwjdpfx Agoigng Neqjp

Stanje: novo, Leto izdelave: 2024, nosilnost: 10.000 kg, Welding positioner, tank turning device with 10,000 kg load capacity Dual synchronized drive Equipped with hand and foot remote control, digital speed display Suitable for workpiece diameters from 160 mm to 4000 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Continuously variable speed: 100 - 1000 mm/min Bsdpfsk Admgsx Agqewp Motor: AC 380 V

Stanje: novo, Leto izdelave: 2025, Self-centering complete set, dual drive, synchronous with handheld remote control with digital display and foot remote control Diameter range from 300 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Bwsdok Adv Eepfx Agqep Continuously adjustable speed: 200 - 1200 mm/min Motor: AC 380 V

Stanje: dober (rabljeno), Welding positioner Protec KT 2000 A Bsdpfopdqfrex Agqowp Load capacity: 2000 kg Continuously adjustable Tilt angle: 0 to 120° With hand and foot remote control Height horizontal: 1200 mm Height tilted to center: 1000 mm Special version with welding current transmission: 800 amperes Length: 1700 mm, Width: 1200 mm

Stanje: novo, Leto izdelave: 2025, 10-ton tank rotator, roller bed Bwsdpog Dg Hwjfx Agqsp 380 V, continuously variable speed adjustment from 200 to 1200 mm/min. Suitable for diameters from 300 mm to 3500 mm Roller diameter: 270 mm x 120 mm Support roller temperature resistance: 100°C Dual drive Supplied as a complete set with hand and foot remote control.

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Bwsdpfx Ajk Adl Hogqep Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min.

Stanje: novo, Leto izdelave: 2025, nosilnost: 20.000 kg, 20-ton container rotator, turning rolls, complete set 380 V, infinitely variable speed adjustable from 200 to 1000 mm/min. Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support rollers temperature resistance: 100°C Dual synchronized drive Bedpfx Aoifgu Uegqswp AC motor, 380 V, 750 W With hand and foot remote control, complete set

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, 10-ton tank turning device, self-centering roller bed 380 V, steplessly adjustable speed from 200 to 1200 mm/min. Suitable for diameters from 300 mm to 3500 mm Bwodsg Sz Uropfx Agqep Roller diameter: 270 mm x 120 mm Support rollers temperature resistance: 100°C Twin drive system Includes hand and foot remote control, complete set Digital speed display

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, 2,000 kg load capacity Free-standing, braked rotator for fixture and tool construction Suitable for assembly, welding, painting, etc. With foot remote control Switchable for right/left rotation Machine is technically as new, barely used Bedpfxohwv Rve Agqewp Dimensions: Height to center of axis: 850 mm More machines of this type in various sizes available from stock. Load capacities from 500 kg to 5,000 kg.