Varjenje vrtljiva miza, naprava za obračanje

Protec KT 2000 800 Ampere

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Giodog Tdpgopfx Afqel Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Article No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Giedpfx Afecuntzoqjl Cutting speed: 35/70 m/min Standard equipment: - Horizontal vice - Length stop (600 mm) - Saw blade tension monitoring, electromechanical - Chip removal brush - Coolant device - Operating manual

Stanje: rabljeno, skupna višina: 2.000 mm, skupna dolžina: 18.500 mm, skupna širina: 2.000 mm,

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2000 kg Handheld remote control with digital display Double foot pedal control Gijdoncfvhspfx Afqel Height approx. min. 800 mm (tilted to center), max. height 1400 mm Min. horizontal height: 1000 mm Faceplate diameter: 1200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Giodpfxod Ab H Hs Afqjl Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Complete robotic welding cell with rotary table and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Equipped with welding gun (Dalex, new in 2018) including cooling system (closed-circuit water cooling) A complete second welding gun (manufacturer: ARO) is included in the scope of delivery Dedicated cooling unit integrated in the system Automatic rotary table with 10-position indexing (currently set up as 5-position for ongoing production) Workstation for loading and unloading parts is well-lit and secured with light barriers System control via Siemens PLC, programmed by HS Automation Giodpfjnr E Enjx Afqjl Siemens operator panel for system operation mounted at the loading station on a swivel arm All components enclosed within a safety housing with security door. The installation can still be inspected under power.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Elektrostatični zračni filter Indusa elstar EL4001 NVAS R/O Na voljo so še 3 kosi. Sesalni priklop je spodaj desno, izpust zraka zgoraj levo. Zračni filtri so iz let 2010–2013 in so bili zelo malo uporabljeni, saj je podjetje leta 2014 prešlo na centralni odsesovalni sistem. Vsi filtri so generalno obnovljeni, očiščeni in dezinficirani, z novim notranjim delom. Naprave so vizualno in tehnično v zelo dobrem stanju. Pred dobavo vse naprave 24 ur delujejo na testnem mestu. Godefyiqbepfx Afqoil Premišljena konstrukcija, visoka kakovost izdelave in prilagodljiva serija so razlog za uspeh elektrostatične serije filtrov elstar. Elektrostatični zračni filter očisti izpušni zrak strojev tam, kjer nastaja – izpušni zrak postane ponovno primeren za dihanje! Elstar elektrofilter je namenjen ločevanju oljne megle, emulzijske megle, oljnega dima, varilskega dima, hlapov, lebdečih delcev, dima z oksidi in aerosolov. Tako je primeren za skoraj vsako industrijsko področje uporabe.

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Giodofw Ah Repfx Afqol Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Gedpfx Aofibd Tjfqoil Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Leto izdelave: 2024, Stanje: novo, Outreach: 5 m Total column height: 5.5 m Load capacity: 80 kg Hook travel: 4.3 m *NEW* Never used *Original packaging* DEMAG Pillar-Mounted Slewing Crane - Load capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 H4.3 V16/4 Gisdpfxovzhhto Afqsl - Year of manufacture: Hook travel max. 4.3 m - Chain size: 4.2 x 12.2 RDC/TDK - Power supply: 380 - 415 V - Control voltage: 24 V