Obračalnik za varjenje, naprava za obračanje rezervoarja

Protec RB 6000

Stanje: novo, Leto izdelave: 2024, nosilnost: 6.000 kg, Oprema: nožno daljinsko upravljanje, Welding positioner, vessel rotator with 6000 kg load capacity with hand and foot remote control Suitable for diameters from 160 mm to 4000 mm Drive roller diameter: 300 mm Lrsdpfx Aajgfql Aemjp Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm Stepless speed adjustment: 50 – 2000 mm/min Motor: AC 380 V

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg Ljdpfxeqt Dmyj Aamsrp - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: dober (rabljeno), various supporting blocks and roller stands, 5-position adjustable Lrjdpfx Aasl Dwnlomep for transverse and longitudinal rotation for relieving, e.g., welding positioners or for transporting pipes various versions available height adjustment in steps or stepless various heights The stands themselves have a load capacity of up to 8 tons Prices from €480 to €850

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 600 kg load capacity height-adjustable welding positioner with through bore 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Lredpfxed Anz Ro Aamop Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: zelo dobro (rabljeno), Motorised welding column 3x3 with movement control via pendant. Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch and flux hopper + Lincoln NA-3N control panel for Amperage and Voltage regulation. Submerged arc duty cycle: 1000 Amperes at 100%. Lrjdpfxeu Aftte Aamep Idealarc® DC-1000 Submerged Arc Welder Input Voltage: 230/460 V Input Current: 193/96.5 A Input Frequency: 60 Hz Input Phase: 3 Input Power: 230/460/3/60 Mode Icon: CC/CV Output Range: 150-1300A DC, 16-46V Polarity: DC Rated Output: 1000A/44V/100%

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm Lodjhlp D Njpfx Aamjrp - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Leto izdelave: 2026, 2-roll driven profile bending machine Lredpohgiuhofx Aamop Hydraulically adjustable top roll Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm Ljdpfxshcnhmo Aamsrp - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Lredpfxjqgcdto Aamsp Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm Lrodpegn Tzlefx Aamjp + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information