Obračalnik za varjenje, naprava za obračanje rezervoarja

Protec RB 200

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system Dsdpfeilg Hdjx Abteuu - Operating manual

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm Dusdpod S Uf Sjfx Abtsu - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm Djdpfx Abelat Hdsteuu - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame Dusdjhpktvopfx Abtsu - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Dodpfx Aorpi E Aebtjuu

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Dsdpsg U Uv Refx Abteuu Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Dujdpfx Abjhua Dqsteu Very robust construction

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer Djdpfx Abohlp D Noteuu - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Model designation Shark 332-1 CCS Duedpfx Ajgvquwebtsu

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Dedpfxsqgcdtj Abtsuu Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)