Varilni gramofon, naprava za obračanje posod

Protec 10 Tonnen RB 10 000 Rollenbock

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600-2400 nm Djdpfx Afsn Arm Telsul Pixel pitch: 8 nm Optical resolution: 11 nm Stray light

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. Dujdpfx Asfg E Hpsfljl - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Dusdjfw Ah Ropfx Aflol Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut Duodpfx Afsfg E Hlolsl • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 2025, Stanje: skoraj kot novo (rabljeno), 2x125-ton gantry crane, 30-meter lifting height, year of manufacture 2014 Dsdpfx Afjgmdnfsloul

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - REZALNI STROJ S VLAKNENSKIM LASERJEM S PALETNIM IZMENJEVALCEM X-OS POMIK: 3048 mm Y-OS POMIK: 1524 mm Z-OS POMIK: 150 mm HITRI PREMIKI X-Y-Z: 100 - 100 m/min Duedpfx Afsvghb Dslel DELOVNO PODROČJE: 3000 x 1500 x 150 mm VIR: IPG Fiber 4000 ; 4000 W KRMILNA ENOTA: PRIMACH 30L TEŽA: 10000 kg SKUPNE MERE: 10500 x 3400 x 2200 mm

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Duedpfx Ajmk Ikteflel Workpiece diameter: 500 – 7,500 mm Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Control: wired handheld pendant Additional options available, e.g.: additional idler units, foot switch

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice Duodpfx Aet Hw Iioflel

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Djdpovr S Ulsfx Afljul Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min. Duodpfsk Adl Hox Aflsl