Mütek Mpp 60 + Entstauber, Absaugung Mmjet350 nakup rabljenega (22.817)

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm Todpjdubpusfx Aqtjb *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Tjdpfsgmfa Asx Aqtob Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Tools: 37/70 knives Todpfx Aqogbkkrotjb Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. *Larger machines available upon request. --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: Tsdpschuvrefx Aqtsb + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics Tedpfxsdv Eu He Aqtjb - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Tedpfjff Sbijx Aqtob Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse Tedsx Tfdhjpfx Aqtsb En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Dimensions (LxLxH) : 2430x2410x1735 mm Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (Shipping €14.90 net) *Please refer to image 2 for construction lengths The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the reverse for mounting *Handle available on request The block magnet systems can be used up to a maximum operating temperature of +100°C. The magnet surface should be cleaned regularly of captured iron parts. Attraction heights for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Mounting Example 1: Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface. Mounting Example 2: Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible. Tjdpfx Aqjtqfhxstsb Installation and safety instructions: When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby. The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation Tedpfxed Nnwlo Aqtsb + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) --- Todpfx Aefci D Aoqtjb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Tjdpfx Aed H R Sxoqtjb Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Tsdpowzarcjfx Aqtsb Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: dober (rabljeno), Four-way toolpost Tool height: 60 mm Tededcwzuspfx Aqtjb Dimensions: Length 190 x Width 185 mm

Stanje: novo, • Razširjevalna glava EPB Graflex A700 60 Tedpfew Rdybox Aqtsb • Izdelano v Franciji • Delovno območje: • Zmogljivost 1: 85–115 mm (3.345–4.530”) • Zmogljivost 2: 114–144 mm (4.485–5.670”) • Natančna nastavitev: 0,01 mm (0.0004”) • Kataloška številka: 1605.014.24 • Sistem Graflex – za profesionalno uporabo • Glava v stanju skladiščenja • Brez znakov uporabe. Samo rahle praske zaradi skladiščenja • Vtičnice in merilne lestvice v popolnem stanju • Mehanika deluje lahkotno in gladko • Pripravljena za takojšnjo uporabo • EPB Graflex je preverjena kakovost in zanesljivost

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, *Vsi naši izdelki so izdelani skrbno in imajo 1-letno garancijo! *Namestitev in usposabljanje operaterja BREZPLAČNO • Model: FABO HY-600 • Tip: Dvojna spiralna (helix) navijalna pralna naprava • Zmogljivost: 60 ton na uro • Dimenzije: 1400 x 6650 x 1800 mm • Velikost vijačnice: Ø 600 x 6000 mm • Hitrost: 22 obr/min • Motor: 2 x 5,5 kW težka izvedba, Gamak • Poraba vode: 55-205 m³ • Vključuje šasijo, motor in varnostne zaščite. ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE! Tedpfoy H Aizjx Aqteb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, volumenski pretok: 2.600 m³/h, sesalna zmogljivost: 2.600 m³/h, raven hrupa: 79 dB, skupna višina: 2.200 mm, skupna dolžina: 1.000 mm, skupna širina: 800 mm, skupna masa: 200 kg, trajanje garancije: 12 meseci, Odsesavanje za dvojne kotne žage ali žage, ki se uporabljajo v aluminijastem sektorju, npr. Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici itd. Če iščete zmogljivo in tiho odsesavanje, ste na pravem mestu. Alternativno je na voljo tudi predkrmilna naprava z vključenim stikalom za vašo dvojno kotno žago, ki deluje preko breznapetostnega kontakta. Odsesavanje je odlično primerno za aluminij / PVC / jeklo. Zelo zmogljivo in izredno tiho odsesavanje, ki ostaja pod 80 db! 2600 m³ na uro sesalne zmogljivosti Tjdpfowii Hxox Aqtsb 3 kW motor Odsesavanje vključuje 14 metrov cev z 2 izhodoma.

Obratovalne ure: 54.000 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, CINCINNATI PROTON 60-30G Premer polža: 60 mm, L/D = 30 Utorrana dovajalna cona Izmet: ca. 450 kg/h PE Motor (DC pogon): 163 kW Todpfeyrihgjx Aqtob Maks. hitrost vrtenja polža: 221 obr/min Orodne cone: 5 kos + 1 kos za adapter Senzor pritiska in temperature taline vključen Krmiljenje: Cincinnati EXc Pro-NT Cilinder v bimetalni izvedbi – stanje: dobro Polž oklepljen in utrjena podajalna cona – stanje: dobro Dimenzije (D x Š x V): 2.580 x 1.430 x 1.800 mm Teža: 2.500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Komplet za robotsko lasersko varjenje Tjdpfx Asrfucfjqtjb Obseg dobave: 1 x Laserline LDM1200-60 (1320W), leto 2011. 1 x 2-polni hladilni agregat Hyfra CHILLER, leto 2018. 1 x varilna glava HIGHYAG LASER. Stroj je na ogledu. Zelo dobro ohranjen, priključen, možnost testiranja. Dostava v države EU je v naši organizaciji, stroški dostave so brezplačni.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.040 mm, premer struženja: 580 mm, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 250 mm, pomik po osi Z: 1.040 mm, TEHNIČNE PODROBNOSTI Premer obračanja: 580 mm Dolžina obračanja: 1.040 mm Število vrtljajev vretena: 3.500 vrt/min Todpfezu Rzrex Aqtjb Gib X-osi: 2.500 mm Gib Z-osi: 1.040 mm Premer vretenčnega konusa: 85 mm PODROBNOSTI O STROJU CNC-krmilnik: Fanuc 18T-C Dimenzije in teža Dimenzije (D × Š × V): 4.650 × 2.320 × 2.060 mm Teža stroja, približno: 7.200 kg OPREMA VDI-revolver z 12 pogonjenimi orodji Transportni sistem za odrezke Stroj brez vodila Nožni stikalo Vpenjalna glava Vpenjalno orodje

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 28.082 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 620 mm, pomik po osi Z: 520 mm, model krmilnika: Siemens 840 D, največja hitrost vretena: 13.000 obr/min, Nadzorna enota (PCU 50) je bila zamenjana marca 2024! Vreteno stroja je bilo zamenjano pri približno 5.500 urah delovanja! Orodja so vključena v ponudbo! TEHNIČNE PODROBNOSTI Hod osi X: 800 mm Hod osi Y: 620 mm Hod osi Z: 520 mm Število vrtljajev vretena: 13.000 vrt/min Število mest v orodni reviji: 30 PODROBNOSTI O STROJU Nadzorna enota: Siemens 840 D Delovne ure Ure delovanja nadzorne enote: 60.150 ur Tsdpfx Aqezvl Tfstsb Ure delovanja stroja: 56.860 ur Ure delovanja vretena: 28.082 ur Zamenjava vretena pri: 5.500 urah OPREMA Orodja 4. os Hofmann RW/NC160 Naprava za odsesavanje oljne meglice Trakovni filter s notranjim hlajenjem 20 bar z dvojnim preklopnim filtrom Dokumentacija Hedelius + Siemens Sinumerik Infrardeči senzor Renishaw Opomba: Prodaja poteka brez strojnih priključkov na zadnji steni stroja. Ker je bil stroj večkrat demonstriran, se lahko število ur delovanja stroja nekoliko razlikuje.

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Tsdpfjitvkusx Aqteb Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Tsdpey Iwlajfx Aqtsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna širina: 9.500 mm, skupna dolžina: 29.325 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Lisec Jumbo – linija za rezanje floatnega in lepljenega stekla, letnik 2008, sestavljena iz naslednjih komponent: LBR-60/30, dvodelna, regal za shranjevanje stekla s 17 pozicij in dimenzijami 1x650, 1x360 in 17x180 mm ATF-60/30, mobilna naprava za odlaganje stekla za odlaganje steklenih plošč iz regala za shranjevanje stekla GFB-60/30RE-S, miza za rezanje floatnega stekla VB-60 + transportni sistem z valjčki, miza za rezanje lepljenega stekla za maksimalno dolžino reza 6000 mm Tedpfezxgt Sox Aqtjb LKT-21/33, transportni sistem z zračnim blazinom LKT-21/33, transportni sistem z zračnim blazinom in pomočjo pri obračanju LKT-21/33, transportni sistem z zračnim blazinom BHK-50/33, miza za izrezovanje z nagibno funkcijo CE-varnostna ograja Linija za rezanje je v zelo dobrem stanju in je takoj na voljo na trenutni lokaciji znotraj EU.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1990, Funkcionalnost: nefunkcionalno, stružna dolžina: 600 mm, premer struženja: 300 mm, potovalna razdalja osi X: 175 mm, pomik po osi Z: 670 mm, moč vretenovega motorja: 11 W, vrtljajska hitrost (min.): 3.500 obr/min, skupna dolžina: 2.620 mm, skupna širina: 1.480 mm, skupna masa: 4.000 kg, prehod palice: 65 mm, nos vretena: MT-NO.7, Oprema: dokumentacija / priročnik, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine offers a rigid construction, hydraulic chucking and automatic tool changing, making it suitable for both small and medium production series. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Todpfjzwdqrex Aqtob Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor * Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT'S NOT FUNCTIONAL. CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3 WAY JAW CHUCK

Stanje: rabljeno, Magnetni separator, nadtekočni magnetni separator, transportni sistem za ločevanje železnih kovin, WAGNER MAGNETE 0428-25/60, rabljena naprava Proizvajalec: Wagner Magnete GmbH Tip: 0428-25/60 Tovarniška oznaka: št.: 508395 Teža: 1100 kg Tsdpfx Aozv S Nasqteb Električni podatki: 400 V Dimenzije traku: 1340 × 600 mm Celotne dimenzije: 2480 × 1630 × 1100 mm Izvedba/Material: Robustna industrijska jeklena konstrukcija, z notranjim visoko zmogljivim magnetnim blokom in izpustnim transportnim trakom Material, ki ga je mogoče transportirati/ločiti: Ločevanje in predelava magnetnih železnih kovin (jeklo, železo, pritrdilni elementi, konstrukcijski deli) iz večjih količin materiala (odpadki, e-odpadki, ostanki drobilnika, steklo, gradbeni odpad, lesni sekanci) ali katerega koli drugega materiala, iz katerega je treba ločiti magnetne delce/materiale.