Kotlov Za Vročo Vodo nakup rabljenega (98.184)

Stanje: rabljeno, Leto izdelave: 2013, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! Stroji so še nameščeni, vendar so odklopljeni od električnega omrežja. Na kraju samem je na voljo viličar z nosilnostjo 11 ton za nakladanje. Prodaja se oprema za čiščenje delov, tipa Eko-Pil, model: PMPO 100T. Hedpfxszy Uk Uj Ah Hent

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 14967, ogrevalna zmogljivost: 1.650 kW (2.243,37 KM), temperatura: 165 °C, kapaciteta rezervoarja: 4.390 l, obratovalni tlak: 18 letvica, Oprema: dokumentacija / priročnik, topla voda, Kotlovnica za toplo vodo na biomaso. Hnedpfx Aezb Iy Heh Hst

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Hsdpfeyzt D Eex Ah Hent Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: generalkompletno obnovljen (rabljeno), 90 m³ / 90.000 l rezervoar za gasilno vodo po standardu DIN 14230 Prostornina rezervoarja: 90.000 litrov / 90 m³ Dolžina: približno 13.500 mm Premer: približno 3.000 mm Teža: približno 11.000 kg Material: jeklo, vrsta S 235 JRG 2 Podzemni rezervoar za podzemno shranjevanje, eno- ali dvostenski, primeren za območja, ki so dostopna za pešce in vozila (razred obremenitve SLW 30) z 1 kupolo (zunanji premer 720 mm) s pokrovom, tesnilom in vijaki. Na voljo nov ali rabljen, takoj! Rezervoar je izpraznjen, očiščen, splošno obnovljen in je bil s strani našega strokovnega podjetja preizkušen glede neprepustnosti. Rezervoar ustreza predpisom standarda DIN 14230 (podzemni rezervoar za gasilno vodo): - Priključek za sesanje gasilne vode po standardu DIN 14244 z nameščeno gasilno spojko / fiksno spojko A po standardu DIN 14319 v izvedbi tipa B brez merilnega priključka - Priključek za odzračevalni prirobniki v velikosti DN 100 z zaporko s skupno dolžino približno 1.300 mm, primeren za 800 mm podzemne zaščite in 500 mm nad zemeljsko površino - Zunaj je za zaščito premazan z bitumom - Po želji lahko rezervoar prevlečemo z notranjo zaščito na osnovi bituma ali epoksidne smole (za zaščito pred korozijo) Hnsdpfohh Stgox Ah Hjt - Prav tako je mogoče rezervoar obložiti s plastično notranjo oblogo Možna je stroškovno ugodna dostava z našim lastnim tovornjakom. Preprosto nam sporočite naslov dostave in vam takoj sporočimo natančne stroške prevoza. Ogled je možen kadar koli po predhodnem dogovoru. Če potrebujete dodatne informacije, nas pokličite ali nam pošljite e-poštno sporočilo na b.barth(at)barth-tank.de Možna je odkup in prodaja rezervoarjev/posod vseh vrst, za več informacij nas kontaktirajte. Takšne rezervoarje imamo stalno na zalogi tudi v naslednjih velikostih: - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000 litrov

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Water supply system, Wilo Helix VE 1605 Pump 1 unit Wilo Helix VE 1605 vertical high-pressure centrifugal pump in inline design Water flow rate up to 30 m³/h, delivery head up to 86 m Hjdpfx Aowvh N Eeh Hjnt (see attached performance curve) Motor 5.5 kW, 3 x 400 V With electronic pump control including inverter for electronic speed regulation Stock: 2 units Price per unit

Stanje: dober (rabljeno), Ročno podajanje materiala za izsekovanje s sistemom za nanašanje folije s toploto. Maksimalna velikost: 720 x 1040 mm. Sistem za nanašanje folije s toploto s 3 conami. Potrebna je menjava grelnega okvirja. Hnjdpozyc D Asfx Ah Hst V proizvodnji. Na voljo takoj.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: MTRE 15-9/5 | 10-10/10 | 5-10/10, Rabljene Grundfos MGE112MC2 centrifugalne vodne črpalke Hnedpfx Ahexphqts Het Proizvajalec: Grundfos Različne konfiguracije: Črpalka MTRE 15-9/5 | Krmilnik MGE112MC2 Črpalka MTRE 10-10/10 | Krmilnik MGE132SD2 Črpalka MTRE 10-10/10 | Krmilnik MGE112SB2 Črpalka MTRE 5-10/10 | Krmilnik MGE1100LC2 Teža: od 42 do 74 kg. Moč: od 4,0 do 7,5 kW Napetost: 50/60 Hz, 380-400 V.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration during mixing without ice + Smoother doughs due to freshly chilled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-bearing components made of stainless steel, maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless-steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption OPTIONAL special accessories, available at extra cost: - Stainless steel wall bracket (for models L130 + L170): + €499 net Hedjivdvvjpfx Ah Hont - Machine table (for models L130 + L170): + €589 net - 3-way changeover valves --- For water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters per hour - Peak cooling capacity*: 330 liters per hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters per minute - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Stanje: rabljeno, Leto izdelave: 1900, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 6.600 m³/h, končni tlak: 2,5 letvica, moč: 610 kW (829,37 KM), vhodna napetost: 6.600 V, vhodni tok: 69 A, vrsta vhodnega toka: Klimatska naprava, 2 kosa črpalk za hladilno vodo. Vertikalna cevna črpalka z odprtim spiralnim kolescem Proizvajalec: KSB Tip: SEZ N 8-60 Oblika kolesa: odprto spiralno Število kolesc: 1 Potopna globina: 2550 mm Tesnilo gredi: drsno obročasto tesnilo Radialni ležaj: RESIDUR vlaknasta keramika Nosilni ležaj: segmentni drsni ležaj Hlajenje: lastno hlajenje, CuNiFe hladilnik Število obratov: 745 / 600 / 496 vrt/min Pretok: 6600 / 5750 / 4750 m³/h Dvižna višina: 25 / 15,5 / 10,5 metra Moč na gredi: 525 kW / 280 kW / 180 kW Učinkovitost črpalke: 85,7 % Temperatura medija: 20°C NPSH: 8,0 m Ohišje: S235JRG2 Gred: 1.4313 Koleso: 1.4409 Premer kolesa: 766/571 mm Elektromotor: Siemens 1LA44548 AW94Z Moč: 610 kW Napetost: 6600 V Tok: 69 A Vključno s frekvenčnim pretvornikom Hedpoxb Tvxsfx Ah Hjnt Mere: Tlačni priključek: DN 800 Tlačna stopnja: PN 10 Teža črpalke brez motorja: 4100 kg Dolžina z motorjem: 7723 mm

Stanje: rabljeno, Leto izdelave: 2007, Prominent water treatment system, consisting of: 1. Softening: Raw water is supplied to the twin softener. Only one vessel is in operation at a time, while the other is in regeneration or on standby. In the softener, calcium and magnesium ions are replaced by sodium. The system is equipped with a volume counter, which switches to the other vessel once the preset quantity has been reached. Regeneration is carried out with brine from the brine tank. The residual hardness at the outlet is 0 °dH. 2. Reverse Osmosis: The reverse osmosis unit fills the permeate tank with demineralized water (permeate). Depending on raw water quality, water temperature, membrane condition, and correct system settings, different conductivity levels and operating pressures are achieved. Upon commissioning, the following flow rates are set: permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate Tank and Ozonation: The non-pressurized 500 l permeate tank is equipped with adjustable level control. For ozone treatment, the water in the permeate tank circulates through an adjustable ozone dosing point. Ozone is produced by the ozone generator via silent electrical discharge from air and is available as an ozone/air mixture. Air and un-dissolved ozone rise to the top of the permeate tank and are discharged via the residual ozone destructor. For monitoring, redox potential and ozone measurements are taken downstream of the centrifugal pump. Ozone dosage is set via the touch panel. Control can be selected by either redox potential or ozone concentration. Additional machine information: water softening, reverse osmosis unit, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. operating pressure: 16 bar Power: 2 A Voltage: 230 V Frequency: 50 Hz Hnjdpfx Aew Uvdgjh Hjt Water supply: < 5 bar (cooling water) Compressed air: 5.5–6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Installation: free-standing Base frame: fully assembled on pipe frame with dished ends Equipment: reverse osmosis unit, reaction tank complete with residual ozone destructor, ozone generator, ozone gas warning device, ozone and redox transmitters, control cabinets with PLC/control system

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: LC564, Used SIDEL bottling line for still water in PET bottles, 25,200 bph The used SIDEL bottling line for still water in PET bottles, 25,200 bph, offers a complete solution for bottling still water. The line remains connected to the power supply, allowing buyers to perform direct testing on-site. SIDEL developed the system in 2006 for processing PET bottles from 350 ml up to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line information This pre-owned SIDEL bottling line for still water in PET bottles processes up to 25,200 bottles per hour. Specifically, bottles with a 30/25-neck finish are used, corresponding to the industry standard. SIDEL equipped the line with an SB014 blow-molding machine featuring 14 cavities. In addition, the filling-capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Hodpfx Ahow Ahfye Hent Key installed equipment The series includes, among others, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). Moreover, a BAC cooling tower effectively controls process temperatures. The SIDEL SB014 blow molder, which includes a hopper, feeder, and deduster, is directly connected to the SIDEL SFGL40/10 filler. This set-up ensures optimal efficiency throughout all stages of the plant. Labelling and packaging SIDEL has integrated a Rollquattro labelling machine, which applies wrap-around roll-fed labels with precision. In addition, a shrink tunnel packages stable multipacks using plastic film. The VANTA WSD-B350 case packer, built in 2011, processes up to 35 cartons per minute. Automated palletizing completes the end-of-line phase and prepares products for shipping. Conveying technology and internal logistics Throughout production, the conveying system is equipped with conveyors built by SIDEL, ensuring uninterrupted flow from blow molder to palletizer. Thanks to this high level of automation, the system reduces manual intervention and boosts consistency. Unlike fragmented setups, this configuration improves operational control and minimizes downtime. Operating conditions and benefits This used SIDEL bottling line for still water in PET bottles, rated at 25,200 bph, is operational and available for on-site testing. In practice, the integration of SIDEL machinery enhances overall performance and simplifies maintenance. As a result, operators can rely on consistent quality and long-term reliability. Applications and compatibility

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Avtomatski stroj za mletje mesa. KG WETTER AW 114. Hnedpfx Ajzyqq Rsh Het

Stanje: rabljeno, 100.000 litrov – podzemni rezervoar - dvojna stena - očiščen - 2 kupoli - prisotne rahle sledi odstranitve Hedpfx Ahoxcgg Tj Hjnt - možnost notranjega premaza po želji - dovoljenje za uporabo sanitarne in požarne vode Nalaganje in prevoz sta lahko ponujena! Odgovarjamo samo na resna in kredibilna povpraševanja z navedbo: imena, e-poštnega naslova in telefonske številke.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100-neu-löwa, 100,000 Litre Firewater Tank – Underground Storage Tank – Retention Tank According to DIN-EN 12285-1, Tank Class A, suitable for media up to 1.1 kg/dm³, single-walled, interior bare steel, exterior with professional insulation. Tank suitable for installation in walkable areas (not suitable for vehicular traffic). Dimensions: D = 2.90 m – L = approx. 15.80 m The tank is equipped with a DN 600 manway with dome cover, bolts, and gasket. Tank ex works, loaded free of charge On request, the tank can be fully equipped with a firewater suction connection, meeting the requirements of DIN 14230 – Underground Firewater Tanks: Firewater Suction Connection / Suction Line made of V2A stainless steel, according to DIN 14230, comprising: - 1 piece suction line DN125 made from V2A stainless steel, with Storz A-coupling and Storz A-blank cap - 1 piece vent pipe DN100 with stainless steel V2A hood - 1 piece anti-vortex plate mounted on suction line - 1 piece information sign "Firewater Extraction Point" - 1 piece dip pipe with measurement rod for level monitoring - 1 piece dome cover with bolts and gasket The suction line can be used as both filling and extraction pipe. All components are supplied ready for installation – ex works – If required/desired: Installation of an above-ground firewater suction connection, according to DIN 14244 – Form B, including A-coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – exterior with epoxy resin coating Optional: Tank interior can be completely sandblasted and coated for service water/firewater application. The tank is suitable as a water tank, firewater tank, firewater retention tank, rainwater retention tank, retention tank, rainwater storage, retention cistern, cistern, etc. General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. We also offer other (new and used) tank installations and rental units! Hedpod Tc Nujfx Ah Hent Furthermore, we buy existing tank systems and can, with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG), properly drain, clean, dismantle, and remove them.

Stanje: dober (rabljeno), Črpalka pripravljena za delo. Zmogljivost: 160 m³/h. Hnedpfeycx Hgex Ah Het

Stanje: rabljeno, Stroj (dodatno): Reverzna osmoza Permeatna zmogljivost: 8000 l/h Dovod: 10000 l/h Pretok koncentrata: 2000 l/h Maks. delovni tlak: 16 bar Moč: 6,5 kW Napetost: 3 x 380 - 415 V Hjdoxzqulopfx Ah Hjnt Frekvenca: 50 Hz Voda: Dovod 2,5 - 5 bar Upravljanje / Krmiljenje: Simatic S7-300 Osnovna konstrukcija: na okvirju iz nerjavečega jekla Oprema: filtracija za dezinfekcijo; dve cevi z membranskimi moduli; doziranje kemikalij z dvema dozirnima črpalkama; centrifugalna črpalka (Lowara); različne cevi, ventili in merilna tehnika; električna omarica z zaslonom na dotik.

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rozmiar arkusza minimalny: 290x400 mm Rozmiar arkusza maksymalny: 640x900 mm Maksymalna grubość arkusza: 0,75 mm Maksymalny obszar tłoczenia na gorąco: 620x840 mm Wolna krawędź arkusza od tłoczenia (krawędź chwytaka): 8–10 mm Liczba stref grzewczych: 4 Średnica cylindra: 540 mm Grubość podkładu: 1,5 mm Wysokość stosu i przedstosu podajnika: 340 mm Wysokość stosu odbiorczego: 510 mm Łoże do tłoczenia na gorąco regulowane w pionie: -2...+0,4 mm Maksymalna szerokość rolki folii do tłoczenia: 840 mm Minimalna odległość między rolkami folii do tłoczenia: 3,0 lub 1,0 mm Maksymalna średnica zewnętrzna rolki folii do tłoczenia: 140 mm Maksymalna liczba rolek do pobierania folii i programów: 4 Krótkie pobrania na program i cykl, liczba: 1...99, długość: 0...999 mm Pobranie pośrednie na program i cykl, liczba wg potrzeb: 0...999 mm Długie pobranie na program i cykl, liczba: 1, długość: 0...999 mm Wysokość matrycy do tłoczenia na gorąco: 7 mm Dostępna również inna wysokość matrycy na życzenie: 6,35 mm Prędkość maszyny: 600–4000 ark./h Maksymalna prędkość tłoczenia na gorąco: 600–3000 ark./h Zainstalowana moc elektryczna napędu (3-fazowa): 10,8 kW Zainstalowana moc elektryczna dla podgrzewania i pobierania folii: 17,0 kW Napięcie: 3x400 V, 50 Hz Hnodpfx Ahozatf Ej Hot Wymiary całkowite: Długość maszyny: 4000 mm Szerokość maszyny: 2540 mm Wysokość maszyny: 1950 mm Powierzchnia podstawy ramy: 2,1 m² Strefa robocza: 5650 mm Długość: 5650 mm Szerokość: 3650 mm Masa całkowita: 7500 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 390 kg, hladilna zmogljivost: 9,5 kW (12,92 KM), Chilled Water Cooling Unit Hnedpfx Aew D T T Esh Het Cooling Capacity: 6 kW Weight: 110 kg

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit Hnsdpeiu Smbefx Ah Het 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration when mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible using water mixing and dosing devices + All water-bearing components made from stainless steel and maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Cooling systems with expansion valves + Electronic ice bank controllers + Stainless steel chill evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, available optionally at extra cost: - Wall bracket made from stainless steel (for model L60 + L100): + €319 net - Machine table (for model L100): Hnjdpfx Ahjivdvco Hot + €389 net - 3-way switching valves --- for water mixing and dosing devices with only two inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 30 litres - Continuous output*: 60 litres/hr - Peak cooling capacity*: 180 litres/hr - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Electrical connection: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 litres/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption at 100 litres: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Stanje: rabljeno, High-Pressure Industrial Water Pumps – 90 kW – 55 bar – 33 m³/h Available: 2 multi-stage industrial pumps for high-pressure water lifting, complete with three-phase asynchronous electric motor and installation baseframe. The pumps come from a snowmaking system and are in good general condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical Data Pump Hjdpfx Aheytgvwj Hsnt Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multi-stage pump Skid-mounted with flexible coupling Electric Motor Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Configuration Industrial baseframe Flexible shaft coupling between motor and pump Complete group, ready for installation Identification plates present Typical Applications Industrial water pumping systems Pressurization plants Process systems Fire-fighting systems Artificial snowmaking plants Industrial washing systems 2 identical units available.

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 09103, COMANDULLI, model EDILUX 7+4 DX Hnsdpfx Ajzz Nfcjh Het • Smer delovanja traku: OD DESNE proti LEVI, letnik 2003, št. #09103 • 7 nosilcev za brušenje čelnih ploskev, 130 in 150 mm, z navpično nihajno gibanje • 2 pnevmatična spodnja / 2 zgornja nosilca • Nosilec za rezkanje vodnih žlebov, ročno nastavitev višine in strani • Nosilec za obdelavo robov, ročna nastavitev višine • Ločena upravljalna plošča na vrtljivi roki • Konzola za podaljšanje mize • Posoda za vodo • Potrebna površina za stroj, približno: 440 x 180 cm • Vstopni del, približno: 190 x 60 cm • Izstopni del, približno: 150 x 60 cm Cenik: • EXW, cena velja ob stroju, plus DDV, pridržana pravica do medprodaje, orodja niso vključena, dodatni deli in dodatna oprema na slikah niso del stroja/obsega dobave. Pogoji plačila: • 50 % predplačila ob potrditvi naročila, 50 % plačila ob obvestilu o pripravljenosti za odpremo. Garancija: • Stroj se prodaja »kot je«, brez kakršnih koli garancijskih zahtev. Možnost ogleda: • v obratu v bližini mesta Cottbus. Razpoložljivost: • po dostavi novega stroja decembra 2026 / januarja 2027.

Stanje: dober (rabljeno), 372 RABLJEN mešalnik za testo + 5 kotlov. TEHNIČNI PODATKI: - prostornina kotla: 150 kg moke, - moč: 380 V. Hnsdpfxjy El Iko Ah Hst Naprava je pripravljena za ogled v našem skladišču (36-068 Bachórz, Poljska). Plačljive možnosti: transport / montaža / zagon. Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOŠKO, RUSKO, UKRAJINSKO. V naši ponudbi najdete pekovske peči, vozičarske peči, etažne peči, slaščičarske peči, trgovinske peči, pekovske stroje, linije za kruh, linije za žemlje, linije za torte, linije za rogljičke, stroje za baguette, mešalnike, mikserje, valjarje, oblikovalce rogljičkov. Oglejte si vse naše oglase.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid hydration when mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components made of stainless steel, maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration machines + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket in stainless steel (for model L60 + L100): + €319,-- net - Machine table (for model L60): + €399,-- net - 3-way switching valves --- for water mixing and dosing devices with only 2 inlets (cold / hot) + €349,-- net Technical specifications: - Recommended batch size: up to 15 liters - Continuous output*: 50 liters / hr - Peak cooling output*: 90 liters / hr - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption per 100 liters: 1 - 2 kWh Hnjdpjivdu Ujfx Ah Hst * at +17.5°C inlet and +2.5°C outlet

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 315031/02, delovna širina: 1.800 mm, dolžina obdelovanca (maks.): 3.000 mm, višina obdelovanca (maks.): 25 mm, TEHNIČNE PODROBNOSTI Dimenzije obdelovanca: Največja dolžina: 3.000 mm Najmanjša dolžina: 400 mm Največja širina: 1.800 mm Najmanjša širina: 200 mm Največja debelina: 25 mm Najmanjša debelina: 3 mm Največja prepognjenost: 1 mm Največji premer papirnatega zvitka: 500 mm Širina papirnatega traku: 1.980 mm Največja delovna širina: 1.800 mm PODROBNOSTI O STROJU Najnižja temperatura: -5 °C Delovna hitrost: 0,8–2 m/min Napetost: 400 V Frekvenca: 50 Hz Tlak: maks. 6 bar Hjdpozypm Djfx Ah Hjnt OPREMA Valjčna pot TVR18/2000 Delovna širina: 1.800 mm Hitrost: 0,35–6,1 m/min Premer valja: 66 mm Razmik valjev: 125 mm