Rezervoar za vodo za gašenje Rezervoar za zemljo Cisterna

Schneider Tankbau 100m³ Löschwassertank EN 12285-1

Stanje: dober (rabljeno), Leto izdelave: 2008, Lindner Power Komet 2800 from 2008, used for the production of Refuse Derived Fuel (RDF). The machine is fully operational, has been regularly serviced, but requires rotor and pusher refurbishment. Technical specification: Model: Lindner Power Komet 2800 Year of production: 2008 Kodpfxovt Uc Us Agkedw Application: Production of Refuse Derived Fuel (RDF) Throughput: 7–9 tons per hour with a 40 mm screen Technical condition: Good working order, fully dismantled as of January 2025 Serviced regularly

Stanje: dober (rabljeno), Leto izdelave: 2016, BG Cam 1325 ATC, Year of manufacture: 2016, Control system: Siemens 808 D, Travel X/Y/Z: 1270/2540/150 mm, High-pressure vacuum table, Table with 4 zones, Drive: Yaskawa servo motor, Rapid traverse X/Y: 35 m/min, Rapid traverse Z: 15 m/min, Resolution: 0.001 mm, Repeat accuracy: 0.01 mm, Kdsdjuhzyqspfx Agkew Spindle speed up to 24,000 rpm, New spindle in 2024, ER 25, 6-position tool changer, Linear guides, Tool length measurement, Vacuum pump, Extraction shoe,

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50-neu-löwa, 50m³ underground tank cistern, brand new according to DIN-EN 12285-1, Single-walled, raw interior, externally professionally insulated. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank is equipped with a DN 600 manhole including dome cover, bolts, and gasket. Upon request, the tank can be fully equipped with a fire-fighting water suction connection, bringing the tank in line with DIN 14230 requirements for underground fire-fighting water tanks. Fire-fighting water suction connection / suction pipe in stainless steel V2A – as per DIN 14230 – comprising: Kedpfed Tmaqox Agksdw - 1 pc. DN125 suction pipe made of stainless steel V2A, with Storz A fixed coupling and Storz A blank coupling, - 1 pc. DN100 vent pipe with hood in stainless steel V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Fire Water Extraction Point", - 1 pc. dip tube with gauge rod for measuring fill level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are pre-assembled for installation – ex works – If required/desired: Installation of an above-ground fire water suction connection in accordance with DIN 14244 – Form B, Including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron – exterior coated with epoxy resin. Optional: Complete interior sandblasting and application of a potable/fire water coating. Tank ex works, loaded and ready for transport. General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and are able to properly empty, clean, dismantle, and transport them with certified specialist company qualification in accordance with the German Water Resources Act (§ 62 WHG).

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings Kedpfxjtynpxo Agksdw • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Popolnoma avtomatska linija za proizvodnjo kolov ali stebrov: vstopni transportni trak, stopničasto podajalno napravo, verižni transporter, dvoglava stroj za zaokroževanje, ločilni modul, prečna krožna žaga za razrez na dolžino, enota za ošiljevanje in posnemanje robov. Možna izdelava kombinacije posnet/posnet rob ali hkratna obdelava dveh kolov — en s konico in posnetim robom, drugi s posnetimi robovi. Največji premer obdelovanca je 120 mm. Kdjdpfx Aotyv S Iegkew

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Datron M8 Cube HSC Pro upravljalna enota V9 Letnik: 2016 3 kW HF-vreteno, od 1.000 1/min do 40.000 1/min s HSK E25 sistemom za vpenjanje orodij HIB agregat za hlajenje HF-vretena 12-pozicijski avtomatski menjalec orodij 3D-taster Renishaw Precizni merilnik dolžine orodja Microjet minimalni sistem mazanja s 4-šobno pršilno enoto Vakuumska miza 700 mm x 500 mm T-utorna plošča 250 mm x 500 mm 2-kraki vakuumski razdelilnik z avtomatskimi ventili Programska oprema: V9 • HPGL vhod • Vhod vrtalnih podatkov • CL-Print vhod • Menijske točke možno deaktivirati / omogočiti • Knjižnice • Polygon senzor XYZ • Uvoz / izvoz podatkov o orodju / poziciji • Makroji BogenA in BogenI • Izvajanje po uporabniških paketih • Uporabniško določljive tabele navojev • Makro Dynamic • Upravljanje tipov orodij • Zaščitena območja • Nadziranje orodja po poti in času • Glajenje • Iso vhod/izhod Na stroju je bila obdelovana le akrilna stekla. Stanje stroja je skoraj kot novo. Kjdpfx Ajxq Tzgjgkodw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 DIMTER cross-cut saw line Kdjdpfxowya Syj Agkow comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. Kodpfx Agofg E Hpekodw - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rdeča, lastna masa: 2.150 kg, dvižna moč: 980 kg/m, dvižna višina: 2.500 mm, velikost pnevmatike: 31X15,5-15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, širina izkopne žlice: 1.500 mm, Leto izdelave: 2025, gorivo: dizel, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, The H&R Wheel Loader 2210-B35 (Wide Track) – a compact loader with a wide track for increased stability. The new 3-cylinder Perkins turbo engine with 18.5 kW (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the compact loader 2210 B35 reaches approximately 16 km/h and is easy to operate. Thanks to the large steering angle of 42° and a small turning radius, it is very well suited for operation in confined spaces. The yard loader comes standard with a pallet fork and a standard bucket, so you can start working immediately. With the 3rd and 4th hydraulic control circuits, a variety of attachments can be operated. The hydraulic quick coupler allows fast and convenient changing of front attachments. With high lifting capacity, the HR 2210 loader can also lift heavy loads of up to 980 kg to a height of 2.53 m. Standard wide tires (31x15.5-15) provide especially secure footing. The E-shift on the joystick ensures particularly comfortable operation of the HR 2210-B35. H&R loaders are technically and visually optimized in-house and thoroughly tested. Each machine additionally receives comprehensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. We provide a TÜV Süd certificate for each machine, enabling individual operating approval according to §21 StVZO (road registration / operating permit as a self-propelled working machine). Key Features of the H&R 2210-B35 Wheel Loader • Full equipment • Wide track for greater stability • Extensively optimized in Germany • Pallet fork included, manually adjustable • 150 cm standard bucket included • Comfort cab with heating, ventilation, and radio • Rear view camera with display • Joystick with float function and E-shift • Additional hydraulics for front attachments, 3rd and 4th circuit • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for towing • Rotating beacon • LED work lights front & rear • Wide tires 31 x 15.5 -15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE-compliant according to EU machinery directive • 1 year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 Gross: €27,304.55 Financing possible! Optional 2-year warranty €590.00 TÜV road registration / operating permit for working machine €595.00 Transport within Germany and Austria available at extra charge Technical Data Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Dump height: 1956 mm (standard bucket, tipped) Lift / Lower time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Kdodpjrhh Sqefx Agkjw Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories available. Please provide your phone number with inquiries!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2012, številka stroja/vozila: 925624, KUKA unused surplus stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1412 kg Serial number: 925625 Includes connection cables: X21/X31 (00-108-948) 25 m and X20/X30 (00-104-744) 25 m Control cabinet KRC2 ED05, serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Kodpfx Agerfch Uekedw Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot axis speeds in °/s: Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Axis 5: 129°/s Axis 6: 206°/s