Geiger Felixliner nakup rabljenega (249)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 570 mm, izvrtina vretena: 62 mm, stružna dolžina: 1.250 mm, premer struženja nad ležiščem sani: 365 mm, višina središča: 280 mm, skupna masa: 4.000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex stock without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Model DUS 560 Year of manufacture 1998 / completely overhauled in 2008 --- Kdjdpfx Abjyqw Eqsxen Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide/traverse travel 345/125 mm Distance between centres / max. turning length 1,250 mm Spindle bore 62 mm Infinitely variable spindle speeds, 2 ranges 3-500 / 15-2,500 rpm Infinitely variable longitudinal and cross feeds 0.01-50 mm/rev Rapid traverse longitudinal/cross 5 / 10 m/min Max. feed force cross/longitudinal 6.5 / 12.5 kN Max. workpiece weight between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive 15/21 kW Total drive 25 kW – 400 V – 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control Type 805 with direct input of all turning parameters via interactive interfaces and corresponding software; control and monitor integrated in the sliding door; with memory expansion and software for free contour programming, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage travel in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X; Joystick for the main spindle with infinitely variable speeds – forward and reverse • Mounted 3-jaw chuck Model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driving plate approx. 250 mm, single faceplate 500 mm, various jaws. • Mounted MULTIFIX toolpost Type CD with 5 different Multifix holders • Separate tool block for CAPTO tool holders with internal coolant supply, various holders partly with collet chucks • Tailstock with air bearing for easy movement, work lamp • Movable chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate control cabinet, adjustable spindle end stop, work lamp, etc. Condition: very good – guides in very good condition, available for demonstration under power Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to your order. More lathes of all sizes available in stock – please inquire.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Description to follow! Ksdpoynmn Asfx Abxedn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm OFFER We can offer you, subject to prior sale and errors excepted, ex stock, without obligation: HERMLE 5-Axis Universal Machining Center in gantry design with tilting rotary table Model: C 800 U Year of manufacture: 1998 No. 12648 _____ Travel, longitudinal X-axis: 800 mm Travel, transverse Y-axis: 600 mm Travel, vertical Z-axis: 500 mm NC tilting axis, A-axis: -20 / +90 ° NC rotary table, C-axis: 360,000 ° Maximum vertical spindle overhang: approx. 600 mm Kodpfx Abex Dndcjxodn Max installation height under spindle: approx. 100 / 600 mm Table size (swing circle Ø 630 mm): 540 x 540 mm Max table workpiece weight: approx. 300 kg Spindle taper: SK 40 Vertical spindle speeds, infinitely variable: 18,000 rpm Feed rates/rapid traverse, stepless: 2 – 35,000 mm/min Feed force: approx. 11/16 Nm Spindle drive: 15 kW Total power: approx. 37 kW – 400 V – 50 Hz Weight: approx. 8,000 kg Accessories / Special Equipment: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are located outside the working area. • Machine bed made of mineral cast with high damping properties, foundation-free installation, excellent static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces, including electronic handwheel. • NC tilting rotary table (C-axis 360,000° / B-axis -20/+90°), Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm, with automatic pivot nozzle block • Tool changer with extended (additional) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extractor with filter, full enclosure • Comprehensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – machine under power, ready for demonstration A video of the machine will be available here shortly (please click on the link): Delivery: ex stock – available immediately, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, before delivery of the machine.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 22.626 h, vpenjalna sila: 100 kN, premer vijaka: 25 mm, Machine hydraulique de moulage par injection datant de 2014. Cette Arburg 470 H 1000-170 dispose d'une force de fermeture de 100 tonnes et d'un diamètre de vis de 15/25 mm. Elle est équipée d'une unité de sélection et d'une conception à plaque unique avec un espacement des colonnes de 470 x 470 mm. Si vous recherchez une machine de moulage par injection de haute qualité, la Arburg 470 H 1000-170 que nous proposons à la vente mérite votre attention. Contactez-nous pour plus d’informations. • Unité de sélection : oui • Plaque unique : oui • Espacement des colonnes : 470 x 470 mm • Heures de fonctionnement : 22 626 h • Électrique : • Tension de service : 400 V, 3~, 50 Hz • Tensions de commande : 230 V, 50 Hz ; 24 V~ • Courant nominal moteur/chauffage : 80 / 58 A • Courant nominal total : 138 A • Puissance totale installée : 75 kW • Remarque sur l’état : petit problème de servomoteur Équipement supplémentaire Kdsdpfxjytqlco Abxon • Système de manipulation Geiger (en option)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, premer vijaka: 25 mm, Ta Arburg 470 S 800-170 je bila izdelana leta 2010. Gre za hidravlično brizgalno stiskalnico z zapiralno silo 80 ton in razdaljo med stebri 470x470 mm. Deluje na 400 V 3~ 50 Hz in ima skupno priključno moč 76 kW. Razmislite o nakupu te hidravlične brizgalne stiskalnice Arburg 470 S 800-170. Za več informacij nas kontaktirajte. • Razdalja med stebri: 470x470 mm Kdjdpfx Asx D R Epebxjn • Enotna vpenjalna plošča: Da • Obratovalna napetost: 400 V 3~ 50 Hz • Krmilna napetost: 230 V ~ 50 Hz, 24 V DC • Nazivni tok motor/gretje: 76 / 59 A • Skupni nazivni tok: 135 A • Skupna priključna moč: 76 kW • Opcijsko: Geiger manipulacija

Stanje: zelo dobro (rabljeno), Drilling depth: 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors excepted, the following from our stock, without obligation: DEGEN Universal Deep Hole Drilling Machine Model: UTB 500-2 Year of manufacture: - Kdodpfx Ajxx A D Tjbxen _____ Drilling depth: 650 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 25 mm Spindle taper: SK40 Infinitely variable feed: 0–120 mm Rapid traverse: rpm Drilling unit vertically adjustable: 250 mm Table dimensions: 570 x 1000 mm 4 T-slots, 14 mm T-slot spacing: 90 mm Table load capacity: 1000 kg Transverse table travel: 460 mm Table swivels: 360° Weight approx.: 1,600 kg Accessories / Special Equipment: • Compact design on a robust base • Deep hole drilling up to 500 mm length possible—ideal for extended drilling in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • Features an RSF Elektronik digital display, type Z 502, for X and Y axes, with 0.01 mm resolution • A solid solution for workshops requiring deep, straight bore holes—not intended for very large diameters or complex machining tasks • The Degen UTB 500 has been extensively modernised—with Lenze feed drive, overhauled Y-axis, new glass scale encoder, newly mounted spindle, and new gas pressure spring—offering reliable precision and high performance Condition: good to very good – ready for demonstration under power A video of the machine is available here (please click on the link): UTB 500/4 Delivery: ex stock—as inspected Payment: strictly net—on receipt of invoice We look forward to your order. We also have further tool grinding machines in stock—please enquire!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Skupna potrebna moč 5,5 kW OPIS SLEDI! Kdedpfoyiu N Rsx Abxon

Stanje: zelo dobro (rabljeno), Premer navoja 36 mm Opis sledi! Kdsdpfxjyhq S Es Abxsn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Swing diameter: 400 mm O F F E R We can offer you the following, subject to prior sale and errors, ex stock, without obligation: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Face Grinding Device Type: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external cylindrical grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with / without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swiveling max.: 30° Workpiece headstock cross adjustment, max.: 400 mm Grinding spindle stock r-feed: 70 mm Grinding spindle stock cross adjustment, approx.: 100 mm Grinding head infeed, automatic intervals: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table stroke, max.: 630 mm Table speed infinitely variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle stock adjustment on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or more diameters, external cylindrical grinding and narrow face grinding • Face grinding device, hydraulically swiveling, with automatic cycles for grinding single and multiple face surfaces as well as stepped faces simultaneously • Electronic program control with large operating panel and ampere meter for both grinding spindles • Belt-driven grinding spindle drive with built-in grinding spindle and 5 separate, interchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Extensive accessories including 4-jaw faceplate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel mounts, foot switch • Separate hydraulic unit, mounted control cabinet, coolant system with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Kjdpfx Aoxyllvobxedn Delivery: Ex stock, available immediately, FCA Metzingen Payment: Net - upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Swing diameter 175 mm Turning length 750 mm Swing diameter over bed slide 350 mm Total power requirement 4 kW Machine weight approx. 1.2 t OFFER We can offer you, subject to prior sale and errors excepted, ex stock: PONTIGGIA LZS - Universal Lathe Type PPL 175 Year of manufacture 1972 _____ Center height 175 mm Kedpjyfh Niefx Abxjdn Max. turning Ø over slide 215 mm Max. swing Ø over bed 350 mm Distance between centers 750 mm Spindle bore 53 mm Infinitely variable speed 30 - 4,000 rpm 40 longitudinal feeds 0.072 - 1.08 mm/rev 40 cross feeds 0.045 - 0.644 mm/rev Metric threads 0.5 – 7.5 mm/pitch Inch threads 64 - 4 TPI Module threads 0.25 – 3.75 module Spindle drive 3 kW Total drive 4 kW - 380 V - 50 Hz Weight 1200 kg Accessories / Special features • The machine is equipped with an electronically monitored chuck guard, which was professionally retrofitted and is fully documented. • Guard for the lead and feed screw retrofitted, including documentation. • For enhanced operator safety, the machine is fitted with two independent emergency stop buttons. • Despite its age, the machine should comply with current accident prevention regulations (UVV). • Hardened and ground guideways for high dimensional accuracy and long-term precision. • Rear chip collecting wall. • Equipped with a 3-jaw chuck RÖHM Ø 200, a 3-jaw chuck AROWA Ø 200, and a 4-jaw chuck LAMBERTINI Ø 300. • Equipped with a Multifix quick-change toolholder size B, including two inserts. • Machine base cabinet for tool storage. • Operating manuals and circuit diagrams available. Condition: very good – ready for demonstration, ideal for training workshops, maintenance, etc. Delivery: ex stock – as seen Payment: strictly net upon collection – after receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table Kjdpfox Haryjx Abxedn • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole • Wet grinding unit with separate band filter coolant filtration • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Wheel diameter - max. 400 mm Machine weight approx. 4 t O F F E R We can offer you the following, subject to prior sale and error, without obligation, from stock: Ksdexvdryjpfx Abxsdn KLINGELNBERG Single- & Double-Flank Gear Rolling Tester with Structure-Borne Noise Testing Model R 30 Year of manufacture 2007 _____ Workpiece - Outside diameter min. / max. 36 /300 mm Center distance workpiece – master gear 135 - 290 mm Max. spindle speed 3,000 rpm Max. drive torque up to 2196 rpm 20 Nm Max. drive torque 2196 – 3,000 rpm 14.7 Nm Spindle drive 4.62 kW Total drive power approx. 10 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment • The machine is a universal gear roll testing machine designed for the following test procedures: o Single-flank roll testing o Double-flank roll testing o Structure-borne noise testing in single & double flank contact o Helix testing in double flank contact • WINDOWS PC control for measurement data acquisition and analysis, with NoisyS32 test software • SIEMENS operator panel for machine control and test cycle evaluation • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating manuals • Currently, the “license dongle” for activating the measurement software is unfortunately missing. We hope to still obtain this from the seller. Condition: Very good! Barely used! Coming soon: Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Always a large selection of gear cutting machines in stock – please inquire for your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Performance: 13 kW Clamping range: 500 mm Voltage: 400 V O F F E R We can offer you the following, subject to prior sale and errors, ex stock and without obligation: H U G O – B E C K Shrink Tunnel Model: SLB 5012/25 Year of manufacture: approx. 2017 _____ Throughput speed: 5–30 m/min Passage width: 500 mm Passage height: 350 mm Temperature: max. 250°C Heating capacity: 12 kW Current consumption: 24 A Power supply: 400/23 V Connected load: 13 kW Weight: 420 kg Machine dimensions (W x L x H): 1220 x 1660 x 420 mm Kjdpfx Aboxx A D Hexjdn Accessories / Special equipment: • Precise heating control for uniform film shrinking • Variable temperature control for different materials and film thicknesses • Air speed adjustment for different shrink processes • Automatic shutdown in the event of overheating or malfunction We are also pleased to inform you that, if you are interested, we have similar packaging machines available from stock at our premises. Condition: Very good Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1980, Workpiece diameter: 600 mm Workpiece weight: 400 kg Workpiece height: 300 mm Total power requirement: 35 kW Machine weight approx.: 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model: SWR 60 T NC-K Year of manufacture: 1980 Serial No.: 169371080 _____ Grinding area: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Infinitely variable table speed: 20 – 80 rpm Swing diameter approx.: 800 mm Max. grinding height above magnet: 300 mm Vertical movement of grinding head: 220 mm Cross-feed travel of grinding carriage: 320 mm Maximum table load: 400 kg Kdodpfxst Abrwo Abxen Automatic vertical feed: 0.01 – 0.2 mm/stroke Grinding spindle speeds, steplessly adjustable: 1,000 – 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive approx. max.: 28 kW Total power: 35 kW – 380 V – 50 Hz Weight: 4,500 kg Accessories / Special equipment: - Control panel at the machine with adjustment options for stepless grinding spindle speed (potentiometer) and analog display of cutting speed in m/sec. as well as ampere display - Stepless table speed, infinitely variable cross-feed speed of the grinding carriage, and stepless vertical feed of the grinding wheel with ROUGHING/FINISHING/SPARKOUT, each adjustable via potentiometer, with dressing monitor for switching rapid vertical traverse to grinding carriage intermittent mode - Hand control panel with push buttons for manual machine operation, such as: dressing unit forwards/backwards, cross-slide forwards/backwards or creep feed, vertical slide up/down or creep feed - 2 preset counters for setting pre-dimension and finish-dimension with automatic shut-off Selector switch +1μ/-1μ, digital Y-axis display - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and stroke - Built-in standard polarity magnet approx. 600 mm Ø - Freestanding control cabinet and separate small coolant pump Condition: satisfactory to good – ready for demonstration under power / ideal for reworking and calibration tasks, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Here is the link to the video: Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year 1980 Serial No. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing Ø approx.: 800 mm Infinitely variable table speeds: 20 – 80 rpm Max. grinding height above table approx.:

Stanje: rabljeno, Leto izdelave: 1978, Crack testing device for series parts Kodpfxst Hwpgs Abxsdn

Stanje: rabljeno, Leto izdelave: 1995, Swing diameter over bed: 50 mm Spindle bore: 26 mm Turning length: 275 mm Total power requirement: 12 kW Machine weight approx.: 4,500 kg T O R N O S CNC-controlled bar turning machine with movable spindle stock (Swiss-type lathe) Model: ENC - 264 Year of manufacture: 1995 No. 160 409 _____ Bar passage Ø min./max.: 4 - 25.4 mm Turning length / maximum slide travel: 275 mm Spindle speeds steplessly programmable: 10 - 6,000 rpm Feed/rapid traverse max.: 10,000/15,000 mm/min Drilling capacity / tapping: 16 / M16 mm Resolution of X and Y axes: 0.0005 / 0.00025 mm Spindle drive max.: 5.5 kW Total drive approx.: 12 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment • FANUC 4-axis CNC path control, Series O-TT with color display and all standard options, graphics, cycles, sub-programs, handwheel, etc. • The machine consists of: - Moveable spindle stock with a max. slide travel of 275 mm on the Z-axis Kdsdot Hwp Tjpfx Abxon - 5 side tools controlled via linkage, including a driven drilling and milling unit on the X-axis (approx. 35 mm travel) - End unit with 4 tool positions on a slide: 3 stationary drilling units and one driven counter spindle. Drilling unit drive possible, but driven drilling units are not included. Center distance 90 mm or 125 mm, X2 travel = 355 mm / Z travel = 100 mm (NC axes) - FMB bar feeder for bars up to 3,000 mm with hydraulics - Pneumatic workpiece ejection tray with discharge conveyor belt • Various tool holders for 20x20 mm tool shanks, hydraulic tool slide for side mounting, various long and short collets, and other accessories • Complete enclosure – coolant system included, currently without chip conveyor – rear-side machining currently not possible. This machine is ideal for medium to larger production runs and is very easy to program, offering maximum precision. Condition: Good to very good – demonstration possible shortly. Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice We look forward to receiving your order – please always inquire with your specific requirements.

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter 250 mm Ksdjt Hwq Depfx Abxedn Turning length 450 mm Control system TX8D Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, with bar feeder

Stanje: rabljeno, Leto izdelave: 1999, X travel 800 mm Y travel 630 mm Z travel 560 mm Total power requirement 60 kW Machine weight approx. 12.5 t Space requirement approx. ... m H E L L E R CNC-controlled horizontal 5-side machining center Model: FST-MC 160/800 / E Year of manufacture: 1999 – Only approx. 500 hours in operation --- Working range: Longitudinal travel X-axis 800 mm Vertical travel Y-axis 630 mm Cross travel Z-axis 560 mm NC rotary table - tilting A-axis 180.000° Rotary B-axis 360.000° Max. workpiece size approx. 450 x 450 x 340 mm (larger dimensions possible with restrictions) Pallet size approx. 450 x 620 mm Tool interface HSK 63A Spindle speeds, stepless 63 - 20,000 rpm Feed/rapid traverse XYZ 1 - 70,000 mm/min Spindle drive power 24 kW Total power load approx. 60 kW – 400 V – 50 Hz Weight approx. 12,500 kg Accessories / Special Equipment: • 5-axis CNC path control SIEMENS SINUMERIK 840 D for true 5-side machining • Workpiece handling system: workpiece is mounted on a pallet outside the machine and is fed via a roller conveyor into a lifting/rotating device, which then positions the pallet onto the rotary/tilt table for automatic clamping and machining. • 40-slot tool magazine with tool loading station, laser tool breakage control • Internal coolant supply HD-50 bar • Advanced coolant treatment system with filtration and temperature control • Oil mist extraction • Separate chiller for motor spindle and electrical cabinet • CO₂ fire extinguishing system • Chip conveyor and complete enclosure • Spacious operator platform for personnel and monitoring, height 600 mm Price ex stock, plus VAT: €89,000 The machine comes from the development department of a vehicle manufacturer and was used only for testing purposes. The original purchase price was around 1.3 million DM. Kodpfxet Hwrhs Abxsdn This is a rare opportunity for medium batch production. Particularly well suited for aluminium machining. H E L L E R (Germany) 5-Axis CNC Controlled Horizontal Machining Centre Model FST-MC 160/800/E Year: 1999 Only approx. 500 hours in operation. [Text cuts off for accessories description]

Stanje: rabljeno, Leto izdelave: 1982, x travel 0 mm y travel 0 mm Table length 600 mm Table width 400 mm Total power requirement 2 kW Machine weight approx. 1500 kg L O R E N Z Gear Cutting Wheel - Sharpening Machine Model MSM, year approx. 1982 * Serial No. 13 125 _____ Table size 600 x 400 mm Vertical table adjustment (motorized/manual) 325 mm Cross table adjustment (manual) 300 mm Kodpet Hwr Uofx Abxsdn Stroke of grinding spindle slide approx. 50 mm Reciprocations of grinding slide approx. 7.5 strokes/min. Mounting height under grinding spindle 165-490 mm Lateral adjustment range of grinding slide 150 mm Grinding wheel diameter x width 100 x 20 mm Grinding spindle speed 11,000 rpm Total drive approx. 2 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special equipment: Workpiece (planer knife) clamping device Type MSV 110 for grinding a profile-parallel flute on cutting wheels, specifically for helical gears. Grinding wheel dressing unit Type MSV 116/117 mounted above the grinding wheel, can be flipped upwards, 2 diamonds arranged at 90° angle Motorized vertical table feed FORTUNA grinding spindle 11,000 rpm, installed, flat underneath Overhang approx. 300 mm, separate FORTUNA grinding spindle 11,000 rpm, front Ø 35 mm Control cabinet mounted, nozzles for dust extraction

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice Kdedpfxet Hwupo Abxen We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Kdodpst Hwylofx Abxen Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Leto izdelave: 1985, stanje: rabljeno, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Spindle taper: MK 40 Table size approx.: 1,020 x 860 mm Table load capacity approx.: 800 kg Maximum longitudinal table travel (X): 900 mm Maximum cross ram travel (Y): 600 mm Maximum boring spindle stroke (Z): 200 mm Maximum vertical movement of cross beam (W): 635 mm Vertical clearance between table and boring spindle max.: 15 - 850 mm Distance between uprights: 950 mm Spindle diameter: 110 mm Spindle taper (internal/external): ISO 40 18 spindle speeds: 10 - 2,500 rpm Infinitely variable milling feed, table: 1 - 6,000 mm/min 4 milling feeds, boring head: 30 - 180 mm/min 6 drilling feeds: 0.01 - 0.39 mm/rev Positioning accuracy for all 3 axes (as new): 0.003 mm Rapid traverse (table / boring head slide / cross beam): 6,000 mm/min Spindle drive power: 6.2 kW Total power requirement: approx. 15 kW - 380 V - 50 Hz Machine weight: approx. 9,000 kg Accessories / Special features: - 3-axis CNC control, BOSCH MICRO 8 with monitor, program input manually, via cassette, and through interface - Digital display for Z-axis - Separate control cabinet, various tools Kedpfx Abjt Hwyxoxjdn - Oil cooler for spindle lubrication, etc.

Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Kdodpfet H Smtsx Abxen Accessories / Special Features: • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Stanje: rabljeno, Leto izdelave: 1970, Drilling capacity in steel (diameter): 32 mm Arm reach: 1,000 mm Maximum workpiece height: 1,400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. m W E B O Radial Drilling Machine Model: BR 32 V Year of manufacture: approx. 1970 Serial No. _____ Drilling capacity in cast iron/steel (through solid): max. 40 / 32 mm Boring (with 50% pre-drilled): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 steps/stepless: 60 – 1,850 rpm Base plate: 1,200 x 930 mm Installation height under spindle: 200 – 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal travel of drill carriage: 1,640 mm Kjdpfx Aot H Smyebxodn 9 feed rates: 0.06 – 1.0 mm/rev Spindle drive approx.: 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / Special features: • Manual mechanical clamping of arm and spindle housing via hand lever • Automatic drill feed with depth stop via vernier • Stepless speed adjustment within three gear steps and 2 motor speeds, changeable via hand lever • Clockwise and counterclockwise rotation • Electro-motorized vertical adjustment of the arm via cross-switch • Ammeter for the drilling motor • Coolant unit with integrated coolant pump • Fixed drilling table approx. 800 x 600 x 600 mm high, vise, etc. Ideal machine for steel fabrication, toolmaking, and mechanical engineering! Condition: Older but good to very good – demonstration-ready Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2001, x-axis travel 630 mm y-axis travel 500 mm z-axis travel 500 mm CNC control Total power requirement 13 kW Machine weight approx. 4.5 t Space requirement approx. ... m O F F E R We can offer you, subject to prior sale and errors excepted, from stock: DECKEL MAHO CNC Vertical Machining Center type DMC 63 V year of manufacture 2001 Serial no. 288500177xx _____ Working area: Longitudinal travel X-axis 630 mm Cross travel Y-axis 500 mm Vertical travel Z-axis 500 mm Clamping area 800 x 500 mm Table load approx. 500 kg Distance table – spindle min / max. 150 / 650 mm Tool holder SK 40 Spindle speed (infinitely variable) 8,000 rpm Feed rates X / Y / Z-axis 0 - 30,000 mm/min Spindle drive power 9/13 kW Total drive power approx. 17 kW - 400 V - 50 Hz Weight approx. 4,500 kg Accessories / Special equipment: • SIEMENS 810 D 3-axis CNC control with ShopMill operating and programming software, all standard options, cycles and subprograms, graphical display for easy shop floor programming • Mobile electronic handwheel • 24-position disc magazine for tools with max. tool diameter 80 / 140 mm x max. length 300 mm • ICS = internal coolant supply through the spindle, 15 bar pressure with corresponding filter system on the coolant unit • Complete working area enclosure with sliding doors, VISIPORT clear-view rotary window, oil mist extraction system, complete coolant filter system with chip conveyor Only 3,216 operating hours, the machine has only been used in a training centre! Condition: Very good, used in a training workshop Please click here for a video of the machine: geiger-germany.com/images/videos/DMG-DMC63V/DMC63V-1.mp4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net, upon receipt of invoice Kjdst Ii Iwopfx Abxsdn Always a selection of CNC machining centres of all kinds in stock – please also ask for alternatives!