Samodejni podajalnik - eno vreteno

INDEX GS 30

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Dksdpscxxx Hjfx Aplsl Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: dober (rabljeno), Leto izdelave: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Dodetumrpopfx Aplokl Module - max. 6 Module - min. 1 Control unit 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 Dksdpfxjxlum Ts Aplsl - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SECONDARY OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 7 kW WEIGHT AND DIMENSIONS - Space requirement: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 34,143 h - Operation hours: 26,657 h - Spindle hours: 15,552 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Part extraction - Parts conveyor belt - Parts ejector - Coolant tank - Bar magazine: FMB turbo 3-26 / 3200 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Dodpfx Aowg Takeplokl Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Dksdpfotrvzxsx Apljl Machine weight: 4,000 kg

Stanje: rabljeno, Leto izdelave: 2014, INDEX C200 CNC stružnica 3 revolverske glave 2 vretena Dsdpfxexxm Hfj Apljkl Fanuc krmilnik: 31i-Model B Motorna aksialna stikala: 6 kos Motorna radialna stikala: 13 kos Nosilci orodij: 11 kos Nosilci vrtalnih palic: 21 kos Zatič: 1 kos Vložki za polnjenje + tulke: Ø51/Ø46/Ø41 Nove MBL vložke za polnjenje: 2 kompleta 2 optični merili obnovljeni pri HEIDENHAIN 1 Balluff škatla z robotskimi rokami z različnimi senzorji, bližinskimi stikali in kabli Motorizirani jermeni: 6 kos Set antivibracijskih vložkov za MBL polnilnike Čas obratovanja: Čas vklopa: 37.946 Hidravlične ure: 37.500 Proizvodni čas: 26.500 Z MBL podajalnikom palic

Stanje: rabljeno, Leto izdelave: 1996, Tehnične podrobnosti: Dodpfxsvpt Eyj Apljkl Teža stroja pribl.: 1750 kg Motor žage: 2,2 kW Skupna potreba moči: 5 kW Hitrost rezanja: 17 - 90 m/min Premer reza: 320 mm Maks. območje reza: 320 x 320 mm Dolžina tračnega lista: 4.930 x 34 x 1,1 mm Dolžina podajanja: max. 9x 600 mm Potrebni prostor pribl.: 2,6 x 2,4 x 1,40 m Avtomatska tračna žaga, ravni rez, min. premer reza 10 mm, min. dolžina reza 6 mm, min. dolžina ostanka 15 mm (avtomatika 80 mm), maks. masa materiala 400 kg/m, rezervoar za hladilno tekočino 60 l, zmogljivost črpalke 16 l/min, napetost vpenjanja nastavljiva 20-60 bar, transporter ostružkov 2.400 x 950 mm, valjčna proga 2.200 x 950 mm, 5 kosov rezervnih tračnih listov 4.930 x 34 x 1,1 mm, navodila za uporabo

Leto izdelave: 1999, stanje: rabljeno, Pribor za stružnico: da Pogonski držalo za orodje VDI 20 Količina: 3 kosi v paketu +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni možen prikaz stroja pod napetostjo ali izdelava videoposnetka. Dkedpjhr Sv Tofx Apljl Naš oglas vsebuje najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 4507, ESTARTA 327 centreless grinding machine Dodog Ix Hmjpfx Aplskl

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m Dkedpfx Apscp Apyolsl - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch