Gannomat Dolgočasno Za Spodnji Tečaj & Okno Ročaj nakup rabljenega (89.988)

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Podpfx Aleiidm Nstogp Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: dober (rabljeno), Leto izdelave: 1996, Used capper, previously part of a bottling line for carbonated drinks and water. Fully functional and in good condition. Pgjdpfx Alsvtpt Ietjp

Stanje: rabljeno, Leto izdelave: 2000, Število vreten po vrsti lukenj: 11 Število vodoravnih vreten: 3 Psdpexc Hi Ujfx Altsgp Glava za lončane tečaje: da, Blum Razmak med svedri: 32 mm Poraba energije: 2,2 kW Vrtalni agregat: vrtljiv

Stanje: rabljeno, Used machine Pgsdjzk Nwdjpfx Altjp Used line boring machine Ganner Compact 30 Features and technical data: - 2 drilling beams, each with 15 spindles - 32 mm pitch - Drilling unit position adjustment: 0 - 650 mm - Minimum distance between the rows of boreholes: 190 mm - Spindle speed: 2800 rpm - Motor power: 2 x 0.75 kW - Maximum clamping height of workpieces: 70 mm - Working height: 850 mm - Compressed air connection: 6 bar Availability: by arrangement Location: Solingen

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 190 471, Gannomat Profi 370 stroj za vrtanje oliv Stroj za vrtanje oliv za vertikalno namestitev kril in vrtanje odprtine olivne od zadaj. -Vrtalna enota nastavljiva po višini in globini (višina z merilnikom) -Pnevmatski cilinder za pritrditev obdelovanca med postopkom vrtanja Podpey Ad Haofx Altogp -Valjčna proga za odlaganje obdelovanca -Zložljiva zaustavitvena ležišča za prenos z nespremenljivim položajem ročaja -Centrirni zaustavitveni ležaj za prenos z variabilnim položajem ročaja -Nožni pedal za izvedbo dela -Naprava za premikanje Dobro vzdrževan stroj z zanesljivim, preverjenim delovanjem. Podatki so razvidni iz tablice. Preizkus mogoč na lokaciji. Za vprašanja nas kontaktirajte!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Engines: 2 x 1.85 A, 50 Hz, 380 V, 2800 rpm Operating air pressure: 6 bar 30 spindles, holder Ø 10 mm Combined foot switch Emergency stop switch Pgodpfx Asv Nptmoltsp Main switch Manual height adjustment Manual lateral adjustment

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for "chip removal" program T-drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm Pedpfx Alev Npw Eotogp swivable 90°, with locking mechanism undercarriage

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Podpfx Aljq Auwtetogp Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x row drilling setting gauge 1x side stop setting gauge 1x stop ruler 1500 mm 1x stop ruler 2000 mm

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Drilling and insertion machine for all types of furniture fittings; row drilling and group drilling machine in the 32 mm system. Power supply: 400V, 0.75kW Spindle speed: 2800 rpm Stop rule: 960 mm 2x swiveling stops For drills with 10 mm shank diameter Maximum workpiece thickness: 40 mm Includes: 1x 7-spindle drilling head for row drilling with 32 mm pitch, equipped with integrated positioning pins Pgedpfx Alsumw Sbotep Manual feed Base frame included Available at extra cost: Olive (handle) drilling head: €450.00 Mepla drilling head with press-in die: €550.00 Hettich drilling head with press-in die: €550.00

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.670 mm, skupna dolžina: 5.000 mm, vrsta vhodnega toka: trifazni, skupna masa: 2.750 kg, višina obdelovanca (maks.): 50 mm, Gannomat Matrix 250/70 We offer this used NC-controlled multi-spindle drilling, gluing and dowel insertion machine, year of manufacture 2003. Manufacturer: Gannomat Model: Matrix 250/70 Year: 2003 - Flat side drilling up to 35 mm diameter possible Pgodozcf Udspfx Altep - End-face operations possible: Drilling 6, 8, 10, 12 mm; gluing and dowel insertion available for 8 mm diameter - Dowel lengths from 25 to 60 mm - X-axis length: 2,500 mm Y-axis length: 700 mm - Maximum workpiece thickness: 50 mm - Incl. mitre fence - Up to 4-field configuration possible with center stop - Incl. 16 suction cups and 8 clamps as shown in the pictures - Incl. vacuum pump - Simple programming directly at the machine: drilling on left and right parts is easily possible without extra programming, simply by referencing the relevant stop during operation The machine is currently still in use. However, we only use it as a drilling machine and do not utilize the dowel insertion and gluing functions. Inspection can be arranged by appointment. If you have any questions or require more information, please feel free to send us a message.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 250 kg, Oprema: žerjav, GEDA INCLINED CONSTRUCTION HOIST COMFORT 250 12M NEW TYPE: GEDA COMFORT, NEW, 2026 model year. Manufacturer: GEDA, Germany Drive: 1.3 kW/230 V/50 Hz Load capacity: max 250 kg Pjdjxvyagspfx Altegp Lifting speed: 30 m/min The equipment for a lifting height up to 12 m includes: - Electric motor - End section with pulley - Standard trolley with safety brake - Base rail 2.0 m - Extension 250/2 m x 4 pcs - Extension 250/1 m - Adjustable corner section (20° to 45°) - Universal basket (82 x 35 x 70 cm) +++++ ++ THE GEDA INCLINED HOIST IS ALSO AVAILABLE WITH 200 KG CAPACITY – ‘STANDARD’ MODEL ++ +++++ +++++ REQUEST AN EVEN BETTER OFFER FOR THE GEDA STANDARD 200 +++++ +++++ GEDA IS IDEAL FOR LIFTING SOLAR PANELS +++++ +++ FOR A LIFTING HEIGHT UP TO 14M, ADD ONE MORE 2.0M RAIL ++++ ++++ SPECIAL PROMOTIONAL PRICE FOR 14M: PRICE ON REQUEST +++++ +++ YOU CAN ALSO PURCHASE 10M, 16M, 18M, 20M, ETC. ++++ +++++ +++++ HIGHER GEDA HOIST HEIGHT THAN 21M: +++++ ++++ WITH A 43M CABLE, YOU CAN ASSEMBLE GEDA UP TO MAX. 21M LIFTING HEIGHT +++ +++ JUST PURCHASE ADDITIONAL 2-METER RAILS +++ +++ YOU CAN CHOOSE DIFFERENT LIFTING HEIGHTS—10M, 12M, 16M, 18M, 20M, 22M, 24M, 26M, 28M, ETC. ++++ +++++ THE SHOWN PRICE IS FOR 12M +++++ +++ DEPENDING ON HOW MANY 2-METER RAILS YOU BUY +++ +++ IF YOU NEED A GREATER HEIGHT THAN 21M – WE INSTALL ++ +++++ YOU GET ++FREE++ A LONGER 63M CABLE+++++ +++++ +++++ FROM PROFESSIONALS FOR PROFESSIONALS +++++ INSTALLATION POSSIBLE ON TERRACES, BALCONIES, FLAT ROOFS, OR WINDOWS, AS WELL AS ON SCAFFOLDING AS A VERTICAL HOIST ++ FOR LIFTING MATERIALS FOR FACADE WORKS ++ +++++ WITH THE GEDA VARIO CONVERSION +++++ +++++ (LEVELING THE BASKET TO HORIZONTAL POSITION) +++++ +++++ YOU GET A VERTICAL HOIST +++++ +++++ THUS, YOU GET 2 HOISTS IN 1 +++++ CERTIFICATE for inclined construction hoist from an authorized company for testing and inspection. +++++ +++ ORIGINAL GEDA INSTALLATION AND OPERATION MANUAL IN CROATIAN +++ +++++ +++ SPECIAL OFFER PRICE GEDA 250 ONLY ++4,900 +++++ +++ SPECIAL OFFER PRICE GEDA 200 ONLY ++4,200 +++++ +++++ 12-MONTH WARRANTY! +++++ +++++ +++++ ALWAYS IN STOCK, READY FOR DELIVERY – MULTIPLE UNITS OF GEDA HOISTS AVAILABLE +++++ +++++ STANDARD 200KG AND COMFORT 250KG +++++ +++++ FOR ANY ADDITIONAL QUESTIONS, OUR TEAM IS AT YOUR SERVICE +++++ IT'S BEST TO CALL US AND FIND OUT WHICH GEDA INCLINED HOIST IS BEST FOR YOUR NEEDS +++++ ++++ WE ARE THE MAIN AUTHORIZED DEALER AND +++++ SERVICE CENTER FOR GEDA ORIGINAL CONSTRUCTION HOISTS IN THE REPUBLIC OF CROATIA FOR OVER 30 YEARS +++++

Stanje: rabljeno, Leto izdelave: 2017, Število vrtalnih vreten: 21 kos Razmak: 32 mm Vpenjanje svedra: vpenjalna površina stebla svedra: 10 mm Upravljanje: nožni pedal Orodja: da Smer vrtanja: od spodaj in čelno Zasuk: ročno Pgedpfsihghrjx Altsp Kot zasuka: samo 0° ali 90° Maks. višina prehoda: 80 mm Maks. širina prehoda: 750 mm Število vpenjalcev materiala: 3 kos Vrsta vpenjanja materiala: pnevmatsko Izvedba: stacionarno Sistem zaustavitev: samo za konstrukcijsko serijo Teža približno: 400 kg Moč motorja: 1,5 kW Premer odsesovalnega priključka: 120 mm Skladiščna lokacija: pri stranki

Stanje: rabljeno, Leto izdelave: 2024, New demonstration machine! List price: €32,665 – Complete in standard configuration with: Sturdy, torsion-free steel frame in welded and bolted construction – TOP lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements – Lamella pressure beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints – Counterpressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support panels – Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam – Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir – Pressing is performed electromechanically by two separate worm gear motors (2 x 0.75 kW) – Pressing force of the pressure beams is infinitely adjustable via two potentiometers and regulated by frequency converters, making the pressure regulation absolutely wear-free – Pressing force for the horizontal beam: min. 500 daN (kg) up to max. 2200 daN (kg), stepless – Pressing force for the vertical beam: min. 300 daN (kg) up to max. 2200 daN (kg), stepless – Pressing and adjustment speed of the beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second – Simple operation via 6 separate push-buttons, 8 movement sequences selectable via control unit – Freely adjustable pressing time preselection with automatic opening (0–30 min, switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm | Height min: 150 mm, max: 1400 mm | Depth: 700 mm – Weight: approx. 1800 kg net – Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional features: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Pressing speeds: 5 / 10 / 25 mm/sec and rapid traverse: 50 mm/sec. Sensors can be deactivated for pressing custom parts. 1 set of machine feet (working height 500 mm). Pgedpfx Aleuf Hx Hetsp Location:

Stanje: rabljeno, Leto izdelave: 2019, Machine construction: Through-feed/return Processing size in X-direction: 1300 mm Processing size in Y-direction: 5600 mm Processing thickness (Z-dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 5.5 kW Main spindle speed: 1,000–20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool changer positions: 3 units Rear wall groove units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 units Vertical drilling spindles - in Y-direction: 10 units Horizontal drilling spindle in X-direction: 2 units Horizontal drilling spindle in Y-direction: 6 units Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connectivity: Possible Table design: Fixed, smooth table Central lubrication: Automatic Tools: Various tools Operating hours: 920 hours Weight approx.: 1,800 kg Extraction diameter: 3 x 80 mm Podjymp N Tjpfx Altogp Machine was modernized at the factory; pressure beam and control technology from model 0572! Location: Customer site

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Podpfx Aovxgrroltsgp Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: zelo dobro (rabljeno), Gannomat stroj za vrtanje dolgih lukenj / stroj za vrtanje čepov z motorjem Leroy-Somer Pgsdpsy Saw Hefx Altsp - Tip motorja: LS80L2 - Moč: 1,1 kW - Število vrtljajev: 2810/min - Napetost: 220/380 V - Frekvenca: 50 Hz - Razred zaščite: IP54 3-fazni pogon - Stabilna delovna miza - Precizna vodila - Nastavljivi omejevalniki - Robustna kovinska konstrukcija - Idealno za serijsko delo in natančne lesene spoje – z vrtalnikom in lončastim rezkarjem - Tlak zraka je potrebno zapreti ročno

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, razmak lukenj: 32 mm, Ganner Gannomat edge-banding and line boring machine Blum and Grass drilling head 7-spindle line boring head including extension rulers 32 mm system pneumatic version Podpfx Aoq E Ur Aeltjgp

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Naprava za vstavljanje moznikov Ganner Selekta 252 Letnik izdelave: 2009 Podpfx Aeycf Ikeltogp

Stanje: novo, Leto izdelave: 2026, CNC-krmiljen stroj za vrtanje in montažo okovja z magazinom za samodejno obdelavo pokrovnih spon in montažnih plošč. Robustnost, dolga življenjska doba in enostavno upravljanje so značilnosti naših avtomatskih CNC-krmiljenih strojev za vrtanje in montažo. Kratek opis: • CNC-krmiljen avtomat za vrtanje in vtiskovanje pokrovnih spon za visoko kapaciteto • Fleksibilnost zaradi CNC-krmiljenja • Masivni in robustni vrtalni agregati GANNOMAT • Vtiskovalna matrica iz jekla za dolgo življenjsko dobo • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostno krmiljenje z detektorjem kovin (opcijsko) Pgodpfx Alodx A U Hjtop

Stanje: novo, Leto izdelave: 2026, CNC obdelovalni center za fronte pohištvenih vrat in predalov. Prehodni stroj za vrtanje, vrtanje in vtiskovanje okovij, utore in rezkanje. Kratek opis: Psdpfodx A U Ijx Altogp • CNC vodeni obdelovalni center za fronte • Popolna obdelava pohištvenih vrat in čel predalov • Sistem za nadzor dolžine in širine obdelovanca

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Pedpodx R Dmjfx Altegp Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: novo, Leto izdelave: 2026, Sestava sistemov za ravnanje s korpusi za izdelavo ročne, polavtomatske ali popolnoma avtomatske montažne linije za korpuse je vedno izvedena glede na zahteve stranke. Pedpfxodx R D Do Altjgp Montažne linije za korpuse, ki vam olajšajo delo, zmanjšajo čase nastavljanja ter povečajo proizvodno zmogljivost, vam z veseljem podrobno predstavimo ob osebnem pogovoru.

Stanje: novo, Leto izdelave: 2026, Univerzalni masivni lesni vrtalni stroj za izdelavo okvirjev in dolgorezne naloge. Kratek opis: • Univerzalno področje uporabe: izdelava okvirjev, vhodnih vrat, oken ter za dolge reze... • Globina vrtanja do 150 mm (večja globina po izbiri) • Pnevmatska nastavitev višinskega položaja za 2 nivoja 0-100 mm, nastavljiva preko mehanskih digitalnih števcev • Vrtanje na dveh nivojih v enem vpenjanju obdelovanca • Pnevmatske sponke za obdelovanec • Več-vretenaste vrtalne glave (opcija) • Pnevmatski podajalnik vrtanja (opcija) • Mobilno preko podvozja (opcija) ali z ročnim viličarjem Psdpedx R D Sjfx Altjgp

Stanje: novo, Leto izdelave: 2026, Vrtalni in vijačni stroj za hkratno vrtanje, lepljenje in vbijanje moznika v sistemu 32 mm z večvretensko vrtalno glavo in nastavljivimi postajami za moznike. Pgedpfxjdx Aw Ns Altop Kratek opis: • Univerzalni vrtalni in vijačni stroj za moznike • Zelo enostavno upravljanje • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijska dodatna vertikalna vrtalna enota • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev za nesting stroje

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju Pgedpjdx Axfofx Altep