Friedrich Deckel Nagibna In Vrtljiva Miza Z Vrtljivo Delilno Mizo nakup rabljenega (127.609)

Stanje: dober (rabljeno), Leto izdelave: 2003, ELB Rotary 40 NC-K okrogla ploščinska brusilka s premerom mize 400 mm, višina brušenja 300 mm, leto izdelave 2003, upravljanje ELN NC-K, moč vretena 4 kW, brusilni disk 300 x 50 x 76,2 mm, vrtljiva miza z magnetno vpenjalno ploščo premera 400 mm, popolna ohišje, hladilni sistem s papirnatim tračnim filtrom, možno preizkusiti pod napetostjo, z veseljem prevzamemo tudi postavitev/usposabljanje ter kasnejši servis na lokaciji! Financiranje/leasing, ni problema, z veseljem pripravimo ponudbo! Lhodpfsuiafuox Al Njf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tipalna glava Hexagon (Tesa) Tesastar M vklj.: - Merilna glava - Kontrolna enota - Po želji merilna tipalka (€ 500,--) Lhedoykiwropfx Al Nef

Stanje: novo, Leto izdelave: 2026, Brusno območje 1000 x 450 mm, premer rotirajoče mize 1000 mm, brusni disk 400 x 100 x 127 mm, moč vretena 11 kW z regulacijo števila vrtljajev, elektro-permanentna magnetna vpenjalna plošča s premerom 1000 mm in regulacijo sile zadrževanja, avtomatski obleki nameščen na vretenasto glavo, vključno s kompenzacijo obsega brušenja, hladilni sistem s filtrom iz papirnatega traku, uporabniku prijazno upravljanje z Mitsubishi SPS krmiljenjem, alternativno SIEMENS 828 CNC krmiljenje, nov stroj z 12-mesečno garancijo, najvišja natančnost po neprekosljivem razmerju med ceno in zmogljivostjo. Na našem razstavnem stroju lahko izvedemo tudi brušenje po želji. Poskrbimo za montažo in izobraževanje na vaši lokaciji ter kasnejši servis. Financiranje/leasing ni problem, z veseljem pripravimo ponudbo! Lhedoh I Tz Sopfx Al Njf

Stanje: rabljeno, Single-column hydraulic press SCHÖN Type FES / C 7 Machine No. 4281 Year of manufacture 1995 Pressing force: 7 tons Throat depth: 170 mm Throat depth at rotary indexing station: 60 mm Table size: 310 x 200 mm Rotary indexing table: Ø 400 mm, with 12 indexing stations Ram area: approx. Ø 100 mm Lhedpfx Asr I E Itol Nef Ram plate: 315 x 200 x 35 mm Ram stroke: 100 mm Installation height (rotary table to ram plate): max. 130 mm Table height above floor: 890 mm Ram rapid traverse speed downward: approx. 300 mm/sec. Ram rapid traverse speed upward: approx. 300 mm/sec. Ram working speed: approx. 30 mm/sec. Motor power: 1.5 kW Power supply: 380 Volt, 50 Hz Tank capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 stations - Mechanically adjustable fixed stop - Adjustable dwell time at BDC - Electric two-hand operation Space requirement (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition

Stanje: delavnici obnovljeno (rabljeno), Rotary Table Polishing Machine from Bula, Model MP81 for sale. Lhjdpelccvmofx Al Njf Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. 6 workpiece holders mounted on a 250 mm pitch circle. 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock system for polishing discs. Polishing spindle diameter 25 mm. The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency converters. Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 1 high-pressure dosing gun WIDOBERG HDP-2, bracket, timer, etc., and pressure vessel. WE CAN ALSO OFFER TO REPAIR OR REFURBISH YOUR EXISTING MACHINE OR A BULA MACHINE YOU ACQUIRE THROUGH ANOTHER CHANNEL.

Stanje: rabljeno, Okrogla miza WMW tip D 315 k Okrogla miza z mehanskim pogonom, ročico in lestvico delilna naprava, delilna miza Tov. št.: 16508 Premer mize: 315 mm Višina mize: pribl. 135 mm Prenosno razmerje 90 : 1 - ročica z lukenjskim kolescem in škarjami - obroč z lestvico za odčitavanje pri ročici - berljiva kotna lestvica na okrogli mizi - izklopni polž za neposredno delitev - vpenjanje preko vpenjalnega vijaka - 14 mm T-utori v mizni plošči - kardanski pogon - vgrajena delilna plošča 17-25-30-39-47-57 - pogon okrogle mize primeren za konzolni rezkalni stroj WMW HECKERT tip FU 315 E, morda tudi za FU 400 E - delilna naprava (delilna plošča = 20) primerna za konzolni rezkalni stroj WMW HECKERT tip FU 315 E, morda tudi za FU 400 E Teža: 145 kg dobro stanje Ljdpfx Aloxcbpio Nohf

Stanje: rabljeno, Vrtljiva miza, delilna miza, delilni aparat WMW tip D 315 k Tovarna št.: 10930 Premer mize: 315 mm Lsdpfsxf Uytex Al Nehf Višina mize: 135 mm Prenosno razmerje: 90 : 1 - Ročica s preluknjano ploščo in škarjami - Lestvični obroč za odčitavanje na ročici - Čitljiva stopinjska skala na vrtljivi mizi - Zložljivo polžasto gonilo za neposredno delitev - Zaklep z vpenjalno ročko - 14 mm T-utorji v površini mize (na enem mestu poškodovan) - Vgrajena delilna plošča 23-28-33-42-51-61 Teža: 85 kg

Stanje: rabljeno, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary Table with SIEMENS Control Machine No. P 81 – 5458 Year of manufacture: 1982 / 2009 Maximum rivet shank diameter: 12 mm Tool shank diameter: 16 mm Throat depth: 190 mm Rivet head stroke per riveting unit: approx. 60 mm Lsdedzp T Nepfx Al Njhf Rivet spindle speed: approx. 1400 rpm Maximum installation height (tool to counter-tool): 80 mm Compressed air requirement: 6 bar Motor output per riveting unit: 1.1 kW Electrical connection: 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame relative to the rotary table - Table size: Ø 295 mm for mounting round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernized control and conversion to servo drive on the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel – built 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space requirement (L x W x H): 3200 x 1250 x 2400 mm Weight: approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. Segments were manually positioned onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically indexes to the next working position. Ideal for saw blade manufacturers and repair shops. Also suitable as a basis for building a special-purpose machine.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: E1334, Kitawaga vrtljiva miza RS160RAH01 Serijska številka: E 1334 - letnik 11/2001 vključno s krmilnikom MACminiEH Ledpfeyn Nviex Al Nehf Serijska številka: H980960364 - letnik 11/2000

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Ljdoykuiaepfx Al Nehf Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 20.500 h, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljeni dvokomponentni stroj za brizganje s vrtljivo mizo Proizvajalec: KRAUSS MAFFEI Lhsdsyat S Sspfx Al Njf Tip: KM110-180-55 CX V Leto izdelave: 2012 Zapiralna sila: 120 ton Razmak med stebri: 420 x 420 mm Premer polža 1: 22 mm Premer polža 2: 18 mm Krmiljenje: MC 5 Oprema: Vrtljiva miza z električnim pogonom 2 x izvlek jedra na premični plošči 1 x izvlek jedra na fiksni plošči

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control Lhodpfx Aoykud Rsl Njf

Leto izdelave: 2026, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_03, Exhibition machine – like new. EVA Turntable / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Base frame raised by 150mm–200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up and down Acoustic signal at cycle start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same start position Fall protection for the film carriage Push buttons for machine power-on and start & stop functions, compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Continuously adjustable turntable speed 5–12 rpm Carriage speed independently adjustable up and down F03 – Carriage speed up: 1.3–5.4 m/min F04 – Carriage speed down: 1.3–5.4 m/min F05 – Number of wraps at pallet base (1–10 revolutions) Lhedpeykud Dofx Al Nsf F06 – Number of wraps at pallet top (1–10 revolutions) F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Simple wrapping (either upwards or downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a stored height (photoelectric sensor deactivated) F29 – Soft-start cycle for application of edge protection Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Maximum outside diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power requirements: 230 V – 1N+PE – 50 HZ Total output: 1.2 kW / 6 A Other systems available immediately from stock.

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently Lhsdpoykucmjfx Al Nef F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Stanje: rabljeno, Jaw width: 160 mm Clamping range: 310 mm Ledpfx Asu Sh Hhsl Nohf

Stanje: zelo dobro (rabljeno), Panel dividing saw – horizontal – with rear lifting table Control: MCS Evolution Software included Lifting table (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Maximum cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Maximum saw blade projection (mm): 135 Maximum gripper opening (mm): 125 Scoring saw (max. blade diameter): 20 mm Main saw (max. blade diameter/output): 460 mm / 21 kW Adjustable saw carriage feed (m/min): 6 – 150 No. 1 front air cushion table with 90° rotation device (mm): 2100 x 4100 Total connected load (kW): approx. 36 Lsdpfx Alsq Rffio Nehf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, premer vrtljive mize: 320 mm, JUNG HFR30 or H30 mechanically and geometrically overhauled to JUNG new machine standards - new rotary magnet Lhodpobwmamjfx Al Nof - new hydraulics 12 months warranty Delivery time: by arrangement We are happy to accept your used JUNG grinding machine in part exchange.

Stanje: rabljeno, Leto izdelave: 1980, Workpiece diameter: 600 mm Workpiece weight: 400 kg Workpiece height: 300 mm Total power requirement: 35 kW Machine weight approx.: 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model: SWR 60 T NC-K Year of manufacture: 1980 Serial No.: 169371080 _____ Grinding area: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Infinitely variable table speed: 20 – 80 rpm Swing diameter approx.: 800 mm Max. grinding height above magnet: 300 mm Vertical movement of grinding head: 220 mm Cross-feed travel of grinding carriage: 320 mm Maximum table load: 400 kg Automatic vertical feed: 0.01 – 0.2 mm/stroke Grinding spindle speeds, steplessly adjustable: 1,000 – 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive approx. max.: 28 kW Total power: 35 kW – 380 V – 50 Hz Weight: 4,500 kg Accessories / Special equipment: - Control panel at the machine with adjustment options for stepless grinding spindle speed (potentiometer) and analog display of cutting speed in m/sec. as well as ampere display - Stepless table speed, infinitely variable cross-feed speed of the grinding carriage, and stepless vertical feed of the grinding wheel with ROUGHING/FINISHING/SPARKOUT, each adjustable via potentiometer, with dressing monitor for switching rapid vertical traverse to grinding carriage intermittent mode - Hand control panel with push buttons for manual machine operation, such as: dressing unit forwards/backwards, cross-slide forwards/backwards or creep feed, vertical slide up/down or creep feed - 2 preset counters for setting pre-dimension and finish-dimension with automatic shut-off Selector switch +1μ/-1μ, digital Y-axis display - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and stroke - Built-in standard polarity magnet approx. 600 mm Ø - Freestanding control cabinet and separate small coolant pump Condition: satisfactory to good – ready for demonstration under power / ideal for reworking and calibration tasks, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Lhsdpfx Ast Abrwol Nef Here is the link to the video: Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year 1980 Serial No. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing Ø approx.: 800 mm Infinitely variable table speeds: 20 – 80 rpm Max. grinding height above table approx.:

Stanje: dober (rabljeno), Ceever Spraymaster Turning pršilna pralna naprava Industrijske pralne naprave serije Spraymaster so napredne rešitve za pranje majhnih in srednje velikih delov s pršenjem s kapaciteto do 4000 kg. Lhodpfx Alsx Ex Nzo Nof Zaradi vrtljive mize, ki omogoča enakomerno omočenje delov s curkom, te naprave zagotavljajo maksimalno učinkovitost pri površinski obdelavi. V notranjosti komore za obdelavo omogoča kanalni sistem s strateško nameščenimi šobami popolno pršilno čiščenje vseh površin in tako optimizira kemične, mehanske in toplotne procese v enem delovnem ciklu. Proizvajalec: Ceever Tip: Spray Master Turning Št. stroja: Z 429 Obremenitev: 500 kg/serija Napetost: 380 V Tok: 90 A Priključna moč: 62 kW Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: rabljeno, Leto izdelave: 1969, Rotary table diameter: 1000 mm Grinding height: 500 mm Grinding head drive power: 15/5.5 kW Total power requirement: 30 kW Machine weight: approx. 18 t Space requirement: approx. ... m S I E L E M A N N Vertical Rotary Table – Surface and Internal Grinding Machine with 2 grinding heads Type RFsB 100 #8185 Year of manufacture: 1969, but completely overhauled by the manufacturer in 1990 _____ Rotary table - face plate diameter: Ø 1,000 mm Distance from table center to column: approx. 1,150 mm Installation height table/grinding heads: approx. 500 mm Workpiece height: approx. 400 mm Reach of grinding heads: approx. 500/700 mm Max. workpiece weight: approx. 900 kg Table speed hydraulic, stepless, CW/CCW (14.5 kW): 5–60 rpm Table longitudinal stroke: approx. 550 mm Table feed (internal/external grinding): 0.0025 - 0.025 mm/stroke Table oscillation (stroke) / slow feed 0.2 m: 0.2 - 1,000 mm/min Table dwell time at stroke reversal: 0-10 sec. Grindable bore diameters: approx. 0–900 mm Grinding slide stroke for both heads: approx. 500 mm Maximum internal grinding spindle diameter: 140/100 mm Surface grinding head diameter (segment wheel): 450 mm Motor drives for surface and internal grinding heads: 15 / 5.5 kW Total drive approx. 30 kW - 380 V/50 Hz * Weight approx. 18,000 kg Accessories/Special equipment: • The rotary table rotates with the workpiece and also carries out the feed movement Lhsdpfxou Su Aps Al Nef • The respective grinding head is swiveled in by turning the column (hydraulic lifting), so that the workpiece can be machined accurately in a single clamping operation • Additional height adjustment of the internal grinding slide by approx. 150 mm • Digital display of grinding wheel speeds • Grinding wheel dressing devices mounted on the grinding tower and can be swung in manually • Separate hydraulic system * separate control cabinet * • Magnetic chuck with stepless holding force adjustment, various small parts • Currently no coolant system The machine is ideal for grinding heavy and irregularly shaped workpieces, gears, ball bearings, housings and circular knives, and is highly versatile and accurate for other grinding tasks as well. Condition: good – soon ready for demonstration. A video can be found here: Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A wide range of other grinding machines always in stock – please inquire with us. Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and horizontal workpiece clamping Model RFsB 100 ...

Stanje: rabljeno, Leto izdelave: 2021, Useful lift: 1,700 mm Workpiece weight: 2.20 t Rotation: +/- 190° Lifting speed: 1.00 / 0.50 m/min Rotational speed: 0.50 rpm Maximum component dimensions: 6,000 x 2,550 x 1,400 mm Control system: SIEMENS HMI Total power requirement: 8.00 kW Ljdpowzmnkjfx Al Nehf Machine weight: approx. 8.00 t Space requirement: approx. 6.00 x 4.00 x H4.00 m This is a HYWEMA lifting and turning device. The product is used as an auxiliary tool to ergonomically lift loads for assembly or welding work under optimal conditions.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4304, premer vrtljive mize: 600 mm, višina brušenja: 450 mm, skupna masa: 14.500 kg, Machine is equipped with 3 spindles: face grinding, external grinding, and internal (bore) grinding. Turret head on B-axis with 1° indexing. Ljdpfjvt A Rtex Al Nehf Band filter unit included.

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Manufacturer: WMW Greiz TGL: 30-7103 Table No.: 11742 Size: C 315 z Diameter: 315 mm Mounting Surface: 400 x 350 mm Height: 150 mm Ledpfx Aowxrhqel Nohf Accessories/Features: 360° graduated scale on the table, rotatable Condition: good Weight: 69 kg Dimensions: 420 x 600 x 160 mm Indexing Plate: 19 / 27 / 31 / 41 / 49 / 59

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 Lhodpfxjnzpx Rj Al Nof -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg