Ovijalec palet Raztezanje z vrtljivo mizo

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Exhibition machine, like new.

Lhjdpfxeykuiae Aacoc
SYNTHESI with flat turntable
Turntable height: 25 mm
Short ramp: 500 mm in length

TECHNICAL DETAILS:
Turntable, LOW PROFILE
· Height: 25 mm
· Maximum pallet dimensions: 1000 x 1200 mm
· Maximum load capacity: 1200 kg
· One ramp included

Wrapping height (including pallet): 2,200 mm
Height detection by light sensor
Frequency-controlled turntable drive (soft start – start/stop)
Frequency-controlled carriage speed, independently adjustable for upward/downward movement
Signal tone at wrap start and end of cycle
Emergency stop switch in compliance with CE regulations
Turntable always stops in the same home position
Fall protection for the film carriage
Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON CONTROL PANEL
All function parameters adjustable via display
F00 – Display lock for program changes
F02 – Infinitely variable turntable speed: 5–12 rpm
Carriage speed upward and downward independently adjustable
F03 – Carriage speed upward: 1.3 to 5.4 m/min
F04 – Carriage speed downward: 1.3 to 5.4 m/min
F05 – Number of wraps at pallet base (1–10 wraps)
F06 – Number of wraps at pallet top (1–10 wraps)
F09 – Photo sensor delay for wrapping height
F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable
F62 – Ergonomic height for film change
Display of film consumption (optional)

ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL
6 storable wrapping programs
F01-1 – Cross-wrapping (upward/downward)
F01-2 – Simple wrapping (up only or down only)
F01-3 – Push button for manual functions
F10–F11 – Wrapping cycle with defined start and stop height
F12 – Wrapping to a preset height (deactivates light sensor height detection)
F22/F23 – Wrapping cycle for top sheet film
F29 – Soft-start cycle for application of edge protection
F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps
Soft start to reduce film tearing on sharp pallet edges
Wrapping cycle with manual or motorized rope forming (optional)
Reinforcement cycle by push button

FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH”
Film pre-stretch ratio set to 200%
Film tension electronically controlled via control unit
Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm
Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz
Total power: 1.2 kW / 8A
Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available

Additional units available from stock in Ludwigsburg.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.