2002 Arburg Allrounder 420C 1300-350 nakup rabljenega (10.088)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections Kjdpfsyxdwdex Al Nslr • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Six Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Inclusive of Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, daylight between platens: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Inclusive of Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, daylight between platens: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340bar, injection volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Inclusive of Multilift handling unit. Kjdpfxetyyn He Al Nslr 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500bar/2,340bar, injection volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Material izdelka: LSR, izmetna pot: 150 mm, delovni tlak: 250 bar, zapiralna sila: 750 kN, minimalna vgradna višina orodja: 250 mm, hod odpiranja: 375 mm, razdalja med stebri X/Y: 320 mm/320 mm, največje mere vpenjanja X/Y: 490 mm/490 mm, največji volumski vbrizg: 187,5 cm³, vbrizgalna sila: 145 kN, največji vbrizgalni tlak: 1150 bar, premer polža: 40 mm. Mere stroja X/Y/Z: pribl. 4000 mm/1850 mm/2000 mm, teža: pribl. 3100 kg. Vključuje dve dozirni enoti. Ogled na lokaciji je možen. Kljdpfx Aljyx H Hhs Njr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 8.250 h, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, skupna dolžina: 4.110 mm, skupna širina: 2.650 mm, skupna višina: 4.810 mm, skupna masa: 22.000 kg, Zapiralna sila: 2000 kN Velikost plošče (v x š): 1772 x 800 mm Minimalna vgradna višina: 400 mm Maksimalna razdalja med ploščama: 900 mm Odpiralni hod: 500 mm Velikost vrtljive mize D: 2000 mm Premer polža: 50 mm Vbrizgalni volumen: 392 ccm Vbrizgalni tlak: 2000 bar Klodpfx Aeyv D T Tjl Nsr Oprema: Besedilo na zaslonu v nemščini Besedilo na zaslonu v angleščini CEE vtičnica 16A Hidravlični izmetnik jedra 4x Zračni ventil 1x Stroj z vodno baterijo Stroj brez materialnega lijaka Izravnalni elementi Vmesnik EUROMAP 67 za ravnanje Vmesnik EUROMAP 73 Vmesnik OPC Mere stroja D x Š x V: 4,11 m x 2,65 m x 4,81 m Skupna teža: 22000 kg

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 43.331 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 45 mm, razmak između stupova: 630 mm, delovna prostornina: 318 cm³, tlak vbrizgavanja: 2.470 letvica, Lager-Nr.: 503604 Hersteller: ARBURG Typ: Allrounder 630 S 2500-800 Steuerung: Selogica Baujahr: 2012 Betriebsstunden: 43331 h Schließkraft: 2500 kN Holmaß h x v: 630 x 630 mm Plattengröße h x v: 900 x 900 mm Kjdpfeyvzyqjx Al Nolr Einbauhöhe min.: 300 mm Einbauhöhe max.: 700 mm Plattenabstand max.: 1300 mm Öffnungsweg: 600 mm Schneckendurchmesser: 45 mm Hubvolumen: 318 ccm Spritzdruck: 2470 bar Ausrüstung Bildschirmtext deutsch Kernzug hydraulisch 2x Maschine inklusive Förderband Maschine inklusive Handling Maschine inklusive Schutzeinhausung Nivellierelemente Technische Daten Handling Maschinenart : Linearroboter Fabrikat: Arburg Steuerung: Multilift Baujahr: 2012 X-Achse: 400 mm Z-Achse: 1400 mm Rotation Achse C: 90 ° Gesamtgewicht: 450 kg Maschinenabmessungen SGM LxBxH: 6.12m x 2.25m x 2.21m Gesamtgewicht: 12200 KG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 38.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2 letvica, izmetalna sila: 225 N, hod izmetalca: 90 mm, dolžina plošče: 900 mm, širina plošče: 900 mm, skupna dolžina: 6.400 mm, skupna širina: 1.950 mm, skupna višina: 2.210 mm, skupna masa: 12.140 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, prosta razpetina: 900 mm, Oprema: dokumentacija / priročnik, Inventarna št.: 503409 Proizvajalec: ARBURG Model: Allrounder 630 S 2500-800 Selogica Leto izdelave: 2012 Kljdpfx Alsyvzyks Ner Obratovalne ure: 38.000 h Zapiralna sila: 2.500 kN Razmik med vodili (vod.), širina x višina: 630 x 630 mm Velikost plošče, širina x višina: 900 x 900 mm Minimalna vgradna višina: 300 mm Maksimalna vgradna višina: 700 mm Maksimalen razmik med ploščama: 900 mm Odpiralna pot: 600 mm Premer polža: 50 mm Prostornina hoda: 392 ccm Tlak brizganja: 2.000 bar Oprema Zaslon z nemškim besedilom CEE vtičnica 16A Compact Flash vmesnik za shranjevanje podatkov Hidravlični izvlek jedra 1x Zračna ventilacija 2x Stroj z vodno baterijo Stroj brez dozatorja materiala Stroj brez sesalnega transporta Nastavljivi nivelirni elementi Vmesnik EUROMAP 67 Vmesnik OPC Schuko vtičnica 10A Selektivna enota Dimenzije stroja (d x š x v): 6,4 m x 1,95 m x 2,21 m Skupna masa: 12.140 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, skupna masa: 5.900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine comes equipped with a take-out robot and an enclosure with a FilterFanUnit that ensures clean operation. It is ideal for precision plastic processing and offers a mold height of 250 mm and a platen spacing of 825 mm. Contact us for further information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Highlights: • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle, 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-driven with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Programmable, controlled nozzle contact pressure (1st injection unit) • Central 125 mm clamping platen set • Machine raised by 100 mm (elevated oscillation elements) • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mold • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet Klsdox D E Dyspfx Al Ner • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby function • Sound pressure level: 70 dB(A) | ±3 Additional Information Screw diameter: 400 units: 35 / 40 / 45 mm Injection pressure (max.): 400: 2500 / 2000 / 1580 bar Shot weight (max. g PS): 400: 141 / 184 / 232 g Heating capacity 400: 9.7 kW | 5 zones Net machine weight: 400: 5900 kg

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), premer vijaka: 45 mm, Ta Arburg Allrounder 630S 2500-675 je bila izdelana leta 2003. Gre za hidravlični brizgalni stroj s premerom polža 45 mm. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja Arburg Allrounder 630S 2500-675. Za več informacij nas kontaktirajte. Kljdpfx Alsyaizio Nsr

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), skupna masa: 28.400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. It is a robust plastics processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. The machine provides an impressive opening stroke of 900 mm and a platen size of 1280 x 1280 mm. Take advantage of this opportunity to purchase the Arburg Allrounder 920H 5000-4600 injection moulding machine. Contact us for more information about this machine. Additional Equipment Ksdpfxsx U Tqrs Al Nelr • The robot and Autoline are not included. The following Piovan accessories are included in the scope of delivery: Piovan hot air dryer G35 / Piovan conveying unit PF30 / 3x Piovan temperature control unit THW118-F (+1 brand new, unused temperature control unit) Machine Advantages Technical Machine Advantages • Pump operating hours: 1,769 hours, hours in automatic cycle: 695 hours • Clamping force: 5,000 kN / Injection unit: 4,600 • Opening stroke: 900 mm / Tie bar distance: 920 x 920 mm / Min-max mould height: 400-1050 mm • Platen size: 1280 x 1280 mm / Ejector stroke: 250 mm / Ejector force: 86 kN Additional Information The machine has seen very little use

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 5.000 kN, skupna masa: 26.400 kg, This 3-axis hydraulic injection moulding machine Arburg Allrounder 920S 5000-3200 was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range from 70 to 90 mm, and a maximum shot weight of up to 1,860 g. Take advantage of the opportunity to purchase this hydraulic injection moulding machine Arburg Allrounder 920S. Contact us for further information about this machine. • Maximum mould opening force: 150 kN • Increased opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mould height: min. 400 – max. 1,050 mm • Distance between platen faces: 1,300 – 1,950 mm • Tie bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Weight of moving platen (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor output: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Total installed power: 96 kW • Colour: Structural Light Grey / Mint Green / Red-Yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameter: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticising capacity (PS): 185 / 215 / 250 kg/h Kljdpfx Aloydnigo Nsr • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Hold pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heater power: 6 × 5,500 + 4,300 W • Installed nozzle heater power: 1,100 W • Oil fill volume: 590 litres • Motor + heater fuse rating: 200 A • Motor fuse: 125 A • Heater fuse: 63 A

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Stroj Arburg Allrounder 1200T 800-150 je bil izdelan leta 2006. Kot vertikalni brizgalni stroj nudi zanesljivo funkcionalnost za specializirane naloge pri predelavi plastike. Razmislite o priložnosti za nakup tega vertikalnega brizgalnega stroja Arburg Allrounder 1200T 800-150. Kontaktirajte nas za več informacij. Prednosti stroja Tehnične prednosti stroja Ksdoyaizpepfx Al Nslr • Zapiralna sila: 800 kN • Razdalja med stebri: 1200 mm / premer polža: 25 mm / maks. teža kosa (g, PS): 45 / izvlek jedra: 1 • Konfiguracija: vertikalna

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 55.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 350 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from the brand Arburg, model 320S 350-60, complete with original Arburg handling system. The machine is fully operational and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 55,000 h Screw diameter: 18 mm Clamping force: 350 kN Core pull: 1x hydraulic Needle shut-off: pneumatic Diverter valve Handling: Arburg Multilift H - Side extraction Incl. discharge conveyor belt Transport and loading can be organized Europe-wide for an additional charge upon request. Prices are plus VAT. Inspection available by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Kljdpfju Hqinjx Al Njr For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from Arburg, model 320S 350-60. The machine is fully functional and ready for immediate use. Technical data: - Year of manufacture: 2005 - Operating hours: 70,000 - Screw diameter: 25 mm - Clamping force: 350 kN - Needle shut-off: Pneumatic - Core pull: 1*Hydraulic - Cavity pressure sensor - Selector valve Transport and loading can be organised Europe-wide for an additional charge upon request. Prices are subject to VAT. Klsdpsu Hqiuofx Al Nsr Viewing by appointment is possible. Please contact us, our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), številka stroja/vozila: 181825, vpenjalna sila: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical data: Kjdext E Tyopfx Al Nslr Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (≈80 tonnes) - Tie bar distance (H x V): 370 mm x 370 mm, clear space between tie bars - Mounting platens (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould installation height: min. 250 mm (sometimes min. 200 mm, depending on configuration) - Maximum platen distance: approx. 650 mm to 750 mm, depending on the minimum mould installation height - Ejector force: typically approx. 35 kN Transport and loading can be organised Europe-wide upon request, at an additional cost. Prices exclude VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet reasonably priced metalworking machine for your production? Or are you looking to sell your machine? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, razmak između stupova: 850 mm, hod izmetalca: 575 mm, širina plošče: 650 mm, višina plošče: 650 mm, For sale is an injection molding machine from Arburg, model 470 S 1300-675. Technical specifications: Year of manufacture: 2001 Pump hours: 90,176 Automatic operation: 76,747 Clamping force: 1300 kN Opening stroke: 575 mm Tie bar distance: 850 mm Minimum mold height: 275 mm Platen size: 650 x 650 mm Ejector stroke: 175 mm Ejector force (forward/backward): 40 Nm Screw diameter: 35 mm A 50 mm exchange cylinder is available at extra cost. Geiger Handling MiniLiner 3.0 is included in the offer. Transport and loading can be organized across Europe upon request and for an additional charge. Kedpswivkdofx Al Njlr All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For more information or to get in touch, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 83.000 h, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from the manufacturer Arburg, model 320S 350-60. Year of manufacture: 2000 Operating hours (automatic mode): 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request and for an additional fee. Price incl. VAT Klsdpfshhuq Aex Al Nsr Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or are you interested in selling your own? For further information or contact options, please visit our website.

Stanje: novo, Leto izdelave: 2010, obratovalne ure: 72.154 h, vpenjalna sila: 800 kN, premer vijaka: 25 mm, delovna prostornina: 54 cm³, Číslo skladu: 503576 Proizvajalec: ARBURG Tip: Allrounder 900 T 800-150 Krmiljenje: Leto izdelave: 2010 Obratovalne ure: 72.154 h Tehnični podatki zapiralne enote Zapiralna sila: 800 kN Razmak med vodili (h x v): 900 x 900 mm Minimalna vgradna višina: 250 mm Maks. razmak med ploščama: 550 mm Odpiralna pot: 300 mm Premer okroglega stola: 900 mm Hod izmetalnika: 150 mm Sila izmetalnika: 46 kN Centrični premer gibljive plošče: 90 mm Centrični premer fiksne plošče: 90 mm Klsdpfx Aeytd Spel Njr Tehnični podatki brizgalne enote Premer polža: 25 mm Volumen hoda: 54 ccm Brizgalni tlak: 2.500 bar Dolžina polža: 24 l/d Navor polža: 210 Nm Plastični tok: 49 g/s PS Brizgalni tok v prosto: 80 g/s PS Dimenzije in teža Mere stroja (D x Š x V): 3,8 m x 1,85 m x 2,15 m Skupna teža: 5.000 kg Oprema Ekranski tekst v nemščini 1x zračni ventil Stroj z okroglim stolom Stroj z vodnim zbiralnikom Nivelirni elementi Vmesnik BDE

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 36.163 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 25 mm, delovna prostornina: 59 cm³, ARBURG Allrounder 375 V 500-170 Numéro de stock : 503615 Fabricant : ARBURG Modèle : Allrounder 375 V 500-170 Commande : Selogica-direct Année de fabrication : 2013 Heures de fonctionnement : 36 163 h Données techniques côté fermeture Force de fermeture : 500 kN Hauteur d'installation min. : 200 mm Hauteur d'installation max. : 550 mm Distance max. entre les plateaux : 302 mm Course d'ouverture : 225 mm Diamètre plateau tournant : 900 mm Force éjecteur : 70 kN Centrage plateau mobile D : 125 mm Poids du moule : 230 kg Données techniques côté injection Diamètre de vis : 25 mm Volume d’injection : 59 cc Pression d’injection : 2500 bar Longueur de vis : 24 l/d Vitesse de vis : 35 tr/min Couple de la vis : 210 Nm Nombre de zones de chauffe : 5 Dimensions & Poids Dimensions machine (LxlxH) : 3 m x 1,6 m x 3,48 m Poids total : 3540 kg Équipement Langue de l'affichage : allemand Plateau tournant Tirant noyau hydraulique 1x Machine équipée de batterie d’eau Machine sans trémie à matière Éléments de nivellement Interface EUROMAP 67 Handling Ksdpfoytdfisx Al Njlr Interface EUROMAP 73 Interface de sécurité pour la plaque éjectrice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, Vpenjalna sila: maks. 500 kN. Razdalja med veznimi drogovi: 320 x 320 mm. Sila odpiranja | hod: maks. 130 kN | 350 mm. Višina orodja (fiksna | spremenljiva): min. 200 mm. Svetla razdalja med ploščama (fiksna | spremenljiva): maks. 550 mm. Montažne plošče za orodje (š x v): maks. 446 x 446 mm. Teža premične polovice orodja: maks. 180 kg. Izmetalna sila | hod: maks. 30 kN | 125 mm. Kledpsy Aybysfx Al Njr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 300 kN, Vpenjalna sila: 300 t Premer vijaka: 60 mm Razdalja med stebri (vertikalno): 720 mm Razdalja med stebri (horizontalno): 720 mm Tip: Horizontalen Klodpfxeyfh Rme Al Nor Pogon: Hibridni Delovne ure: 23.000 Jedrna izvleka 1 Pnevmatski nadzor izvleke jedra Euromap 67 2 servo črpalki.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 58 h, Splošni podatki Mere širina: 4360 mm Mere globina: 1718 mm Mere višina: 3910 mm Teža stroja: 7600 kg Kedpfx Aox D Nc Hol Nslr Vbrizgalna enota Premer polža: 35 mm Tlak vbrizgavanja: 2500 bar Zatezna enota Zatezna sila: 1000 kN Ta stroj za brizganje Arburg ALLROUNDER 1200 t 1000 - 400 je bil izdelan leta 2018 v Nemčiji. Ima 58 delovnih ur. Stroj ima zatezno silo 1000 kN, je kot nov, rabljen samo za testiranje. Stroj mora kupec pridobiti CE certifikat, več ponudb imamo od tretje osebe, najnižja od 2.000 €. Vrsta uporabe Brizganje plastike

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 420C-800-250 Klodpopdr Dcjfx Al Njr Clamping force: 80 tons Screw diameter: 30 mm Year of manufacture: 2003 Tie bar spacing: 420 x 420 mm Injection weight: 97 g

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Max. opening stroke [mm]: 600 Max. ejector stroke [mm]: 225 Mounting thread [M]: 24 Multi-turntable type: turntable Turntable diameter [mm]: 900 Turntable mounting thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1: 30, EE2: 25, EE3: 25 Max. shot weight [g] PS: EE1: 83, EE2: 59, EE3: 58 Injection unit configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robotic interface Klsdpfx Aoyf Ha Hjl Nsr Inspection possible by appointment at any time. Free loaded onto truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Stanje: zelo dobro (rabljeno), Proizvajalec: ARBURG Model: Allrounder 270-M-500-90 Leto izdelave: 1995 Kodsx Eitbepfx Al Nolr Serijska številka: 164822 Krmilni sistem: Krmilna enota: Arburg Multronica Vbrizgalna enota: Tip vbrizga: vertikalni (vertikalna brizgalna enota) Premer polža: Ø 20 mm Zapiralna enota: Zapiralna sila: 500 kN Dodatna oprema: Pick sistem: sistem odvzema izdelkov Divider chute: razdelilni žleb / selekcijski žleb Ohišje: popolna zaščitna obloga (enclosure)

Stanje: zelo dobro (rabljeno), Proizvajalec: ARBURG Model: Allrounder 270-S-500-60 Leto izdelave: 1998 Serijska številka: 173062 Kedpfjx Eiq Hsx Al Nolr Krmilni sistem: Arburg Selogica Premer polža: 18 mm