Stroj za brizganje
Arburg 320C 600-250/ 420C 1000-250/ 270C 300-10

Name: Arburg 320C 600-250/ 420C 1000-250/ 270C 300-10
Brand: Arburg
Availability: InStock

Leto izdelave

2003

Stanje

Rabljeno

Lokacija

Nemčija

Stroj za brizganje Arburg 320C 600-250/ 420C 1000-250/ 270C 300-10

Arburg 320C 600-250/ 420C 1000-250/ 270C 300-10

Podatki o stroju

Oznaka stroja:: Stroj za brizganje

Proizvajalec:: Arburg

Model:: 320C 600-250/ 420C 1000-250/ 270C 300-10

Leto izdelave:: 2003

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: Deutschland

Pokliči

Podrobnosti ponudbe

ID oglasa:: A16404857

Referenčna številka:: INNO27241

Posodobitev:: nazadnje dne 02.04.2026

Opis

Six Arburg injection moulding machines are available.

1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Inclusive of Multilift handling unit.

2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, daylight between platens: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Inclusive of Multilift handling unit.

4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, daylight between platens: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6.

5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340bar, injection volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6.

6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Inclusive of Multilift handling unit.

Blsdetyyn Hjpfx Acmoh
7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500bar/2,340bar, injection volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm.

Documentation available. Inspection on site is possible.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2017

1.960 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 30 58... oglasi

+49 30 79... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Obdelovalni center - horizontalni DECKEL DMC 80 H duoBLOCK

Nemčija

574 km

Obdelovalni center - horizontalni
DECKELDMC 80 H duoBLOCK

Pokliči

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Blsdpepumdcefx Acmeh Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours

Poglej podrobnosti

Mali oglas

Reiden

550 km

Radialni vrtalni stroj
OerlikonUB2

Pokliči

Mali oglas

Stroj za brušenje z vrtljivo mizo KEHREN RS 7C

Wildflecken

601 km

Stroj za brušenje z vrtljivo mizo
KEHRENRS 7C

Pokliči

Leto izdelave: 1987, stanje: rabljeno, Kehren rotary table type RS 7C, used Manufacturer: Kehren, Honneff Reference no.: 4179 Year of manufacture: 1987 Control: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Bljdpfshgmwgox Acmjh Control panel with display Coolant system Rinsing pump Coolant pump Automatic paper band filter system Control cabinet

Poglej podrobnosti

Mali oglas

Stroj za vrtanje in rezkanje Fehlmann Picomax 20

Reiden

550 km

Stroj za vrtanje in rezkanje
FehlmannPicomax 20

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0–527 mm Quick-change system: SF 32 Spindle motor: 2.9 kW Infinitely variable speed range: 50–6300 rpm Clamping surface: 320 x 670 mm Dimensions and weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Bledpfewkrp Eex Acmsh Weight: approx. 850 kg

Poglej podrobnosti

Mali oglas

Cilindrični brusilni stroj Studer S30-12

Zuchwil

580 km

Cilindrični brusilni stroj
StuderS30-12

Pokliči

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Bjdsvca Izopfx Acmolh Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Poglej podrobnosti

Mali oglas

Vertikalni obdelovalni center s 5 osmi MIKRON UCP 600

Root

516 km

Vertikalni obdelovalni center s 5 osmi
MIKRONUCP 600

Pokliči

Mali oglas

Stroj za brizganje KraussMaffei KM 80 C1

Merenberg

699 km

Stroj za brizganje
KraussMaffeiKM 80 C1

3.142 €

Fiksna cena plus DDV

Pokliči

Stanje: pripravljen za uporabo (rabljen), Rabljeni stroj Brizgalni stroj Proizvajalec: Krauss Maffei KM 80 C1 Letnik: 2000 Na zalogi je le še 1 stroj Ni dobavnega roka, takoj dobavljivo Ogled možen po predhodnem dogovoru Stroj ni več priključen na elektriko / noben priključek za hladilno vodo Stroj je strokovno uskladiščen Tehnični podatki: Zapiralna sila (kN): 800 kN Pritrdilna plošča (mm): 610×610 Bljdpfx Acju Ti Sromoh Razdalja med stebri (mm): Vgradna višina (mm): 250 Odprtina med ploščami (mm): 750 Krmiljenje: MC4 Zaslon v nemškem jeziku (ni mogoče spremeniti v druge jezike) Brizgalna enota Premer polža (mm): 45 Brizgalni tlak (bar): 1878 Prostornina hoda (cm³): 275 Moč pogona črpalke (kW): 18,5 Grejna moč (kW): 13 Polnjenje olja (l): 270 Dimenzije (m): 4,3 x 1,4 x 2,1 Skupna masa: 3,2 t Dodatne fotografije na zahtevo.

Poglej podrobnosti

Mali oglas

Dvokomponentni stroj za brizganje ARBURG 720A3200-800-70

Schweiz

524 km

Dvokomponentni stroj za brizganje
ARBURG720A3200-800-70

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Blsdsv S E Dgspfx Acmjh Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Request technical specifications.

Poglej podrobnosti

Mali oglas

Nattheim

457 km

CNC obdelovalni center
HolzHer7120

Pokliči

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Bledpfovvi Nbjx Acmjh

Poglej podrobnosti

Mali oglas

Hannover

791 km

Stroj za brizganje
Arburg320C 500-170

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 47.247 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 230999, vpenjalna sila: 500 kN, premer vijaka: 35 mm, delovna prostornina: 115 cm³, injekcijska masa: 105 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from manufacturing year 2010 onwards. We have been major suppliers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2015 Operating Hours: 47,247 h Control System: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Bljdpfxov U Tl Ds Acmjh Functionality: Fully operational Condition: Very well maintained Extras: - 1x core pull - Interface for handling - 35 mm high-wear resistant thermoplastic screw/barrel - Complete documentation and software (on CF card, German) - Single ownership – origin: Germany - Regular maintenance by the manufacturer and previous owner Visible peripheral devices are not included in this offer unless explicitly stated otherwise. Injection Unit: - Screw diameter: 35 mm - Shot weight: 105 g/PS - Injection pressure: 1,470 bar - Injection volume: 115 ccm Clamping Unit: - Clamping force: 50 t / 500 kN - Tie bar spacing: 320 x 320 mm - Mounting plates: 446 x 446 mm - Mold installation height: 200 mm - Max. platen distance: 550 mm - Ejector stroke / force: 125 mm / 30 kN - Clamping unit: hydraulic Motor output: 11 kW Heating capacity: 9.4 kW Total power: 21 kW The machine is immediately available at our warehouse in Hannover, Germany and has been tested. ✔ Warranty Warranty until first commissioning. Loading/Shipping: Free loaded onto buyer’s truck or free delivery within Germany against freight reimbursement – worldwide shipping possible. Immediately available at our warehouse in Hannover, Germany. Information about the machines we offer and our company: - We only sell machines we have purchased from active production, available from our warehouse in Hannover. - All machines offered are tested and checked prior to dismantling. - We do NOT sell assets from insolvency cases – we are NOT brokers or intermediaries handling third-party equipment. - All machines offered are from successful companies where maintenance and care are standard practice. - All listed machines can be viewed under power in our warehouse.

Poglej podrobnosti

Oglašujte tukaj