Čistilne Naprave Za Vodo nakup rabljenega (97.783)

Leto izdelave: 1991, stanje: rabljeno, Vsebina: 15 hl Iisdpfx Aow Tml Esptef Periferija: črpalka

Stanje: rabljeno, Leto izdelave: 2019, Izoliran, stoječ nerjavni rezervoar s grelnim plaščem (vključno z regulacijo temperature) in tlačno črpalko (3 m3/h pri 3 bar). Rezervoar je dodatno opremljen z iztočno cevjo, pokazateljem nivoja in manometrom. Stroj (dodatno): stoječ, izoliran, ogrevan nerjavni rezervoar Bruto prostornina: 2000 l Višina: 2100 mm Material: nerjavno jeklo 1.4404 (AISI 316L) z izolacijskim plaščem iz 1.4301 (AISI 304) Osnovna konstrukcija: stoji na 4 nogah Oprema: izolacija (debelina 50 mm); grelni plašč; regulacija temperature; tlačna črpalka (Grundfos); iztočna cev; cevni pokazatelj nivoja; manometer. Iedpfoxwy Aqsx Aptjif

Stanje: rabljeno, Leto izdelave: 2007, Prominent water treatment system, consisting of: 1. Softening: Raw water is supplied to the twin softener. Only one vessel is in operation at a time, while the other is in regeneration or on standby. In the softener, calcium and magnesium ions are replaced by sodium. The system is equipped with a volume counter, which switches to the other vessel once the preset quantity has been reached. Regeneration is carried out with brine from the brine tank. The residual hardness at the outlet is 0 °dH. 2. Reverse Osmosis: The reverse osmosis unit fills the permeate tank with demineralized water (permeate). Depending on raw water quality, water temperature, membrane condition, and correct system settings, different conductivity levels and operating pressures are achieved. Upon commissioning, the following flow rates are set: permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate Tank and Ozonation: The non-pressurized 500 l permeate tank is equipped with adjustable level control. For ozone treatment, the water in the permeate tank circulates through an adjustable ozone dosing point. Ozone is produced by the ozone generator via silent electrical discharge from air and is available as an ozone/air mixture. Air and un-dissolved ozone rise to the top of the permeate tank and are discharged via the residual ozone destructor. For monitoring, redox potential and ozone measurements are taken downstream of the centrifugal pump. Ozone dosage is set via the touch panel. Control can be selected by either redox potential or ozone concentration. Additional machine information: water softening, reverse osmosis unit, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Iiedpfx Aew Uvdgsptsf Max. operating pressure: 16 bar Power: 2 A Voltage: 230 V Frequency: 50 Hz Water supply: < 5 bar (cooling water) Compressed air: 5.5–6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Installation: free-standing Base frame: fully assembled on pipe frame with dished ends Equipment: reverse osmosis unit, reaction tank complete with residual ozone destructor, ozone generator, ozone gas warning device, ozone and redox transmitters, control cabinets with PLC/control system

Stanje: rabljeno, Stroj (dodatno): Reverzna osmoza Permeatna zmogljivost: 8000 l/h Dovod: 10000 l/h Pretok koncentrata: 2000 l/h Maks. delovni tlak: 16 bar Moč: 6,5 kW Napetost: 3 x 380 - 415 V Frekvenca: 50 Hz Voda: Dovod 2,5 - 5 bar Upravljanje / Krmiljenje: Simatic S7-300 Osnovna konstrukcija: na okvirju iz nerjavečega jekla Ijdjxzquljpfx Aptoif Oprema: filtracija za dezinfekcijo; dve cevi z membranskimi moduli; doziranje kemikalij z dvema dozirnima črpalkama; centrifugalna črpalka (Lowara); različne cevi, ventili in merilna tehnika; električna omarica z zaslonom na dotik.

Stanje: rabljeno, Leto izdelave: 1993, Berkefeldov sistem za mehčanje vode: ionski izmenjevalec za zmanjšanje trdote zaradi kalcija in magnezija z 2 filtrnima rezervoarjema in solno posodo, primeren za neprekinjeno delovanje. Leto izdelave: 1993. Zmogljivost: 6000 l/h Dodatno: ionski izmenjevalec Iijdpow Uc Ewefx Aptsf Zmogljivost: 6000 l/h Obratovalni nadtlak: 10 bar

Stanje: rabljeno, Stoječi rezervoar za toplo vodo z notranjo grelno kačo za ogrevanje s paro. Prostornina cca 30 hl. Stroj (dodatno): grelni rezervoar Prostornina cca: 3000 l Širina: 1400 mm Višina: 2800 mm Material: nerjaveče jeklo Položaj / postavitev: samostoječ Iodpfjw Tdx Asx Aptjif Osnovna konstrukcija: cilindričen rezervoar na cevastih nogah Oprema: grelna kača, prikazovalnik temperature, iztok na sredini dna, zgornja revizijska odprtina, preliva.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Kotel za proizvodnjo tople vode, primeren za sušilnice lesa. Moc: 1 MW Zasnovan za uporabo trdnih goriv, kot so lesni sekanci, žagovina in lesna skorja. Iisdpfx Apjzt Iycetjf Naprava bo na voljo v začetku leta 2027.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration when mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible using water mixing and dosing devices + All water-bearing components made from stainless steel and maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Cooling systems with expansion valves + Electronic ice bank controllers + Stainless steel chill evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, available optionally at extra cost: - Wall bracket made from stainless steel (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way switching valves --- for water mixing and dosing devices with only two inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 30 litres - Continuous output*: 60 litres/hr - Peak cooling capacity*: 180 litres/hr - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Electrical connection: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch Iiodpfxoivdvco Aptjf - Water flow at 2 bar: 8 litres/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption at 100 litres: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New machine with 12 months warranty Advantages of chilled ice water: + consistently low discharge water temperatures Iijdpfxsivdvko Aptsf + precise dough temperature control all year round + rapid swelling during mixing without the need for ice + improved dough texture thanks to freshly chilled, liquid ice water + accurate dosing possible using water mixing and metering devices + water-bearing components made of stainless steel, maintenance-free + hygienically flawless, clean drinking water Langheinz ice water systems stand out for: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water bath + drain valve in the ice water bath + high flow rates + compact dimensions + easy-to-clean surface structure + low energy consumption Special accessories, optionally available at extra cost: - Stainless steel wall bracket (for models L130 & L170): + €499 net - Machine table (for models L130 & L170): + €589 net - 3-way diverter valves --- for water mixing and metering devices with only 2 inlets (cold / hot) + €349 net Technical Data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling output*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1.189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid hydration when mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components made of stainless steel, maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration machines + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket in stainless steel (for model L60 + L100): + €319,-- net - Machine table (for model L60): + €399,-- net - 3-way switching valves --- for water mixing and dosing devices with only 2 inlets (cold / hot) + €349,-- net Technical specifications: - Recommended batch size: up to 15 liters - Continuous output*: 50 liters / hr - Peak cooling output*: 90 liters / hr - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min Iijdpfx Apoivdu Ujtof - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration during mixing without ice + Smoother doughs due to freshly chilled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-bearing components made of stainless steel, maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless-steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption OPTIONAL special accessories, available at extra cost: - Stainless steel wall bracket (for models L130 + L170): + €499 net - Machine table (for models L130 + L170): + €589 net - 3-way changeover valves --- For water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters per hour - Peak cooling capacity*: 330 liters per hour Iijdpfx Apeivdvvjtof - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters per minute - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low water charging temperatures + Precise dough temperature control all year round + Rapid swelling during mixing without the need for ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible with water mixing and dosing devices + All water-conducting parts are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel refrigeration evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface texture + Low energy consumption Iijdpfjivdv Dox Aptef SPECIAL accessories, optionally available for an extra charge: - 3-way changeover valves --- for water mixing and dosing units with only two inlets (cold / hot) + €349,-- net Technical data: - Batch size (recommended): up to 70 litres - Continuous capacity*: 230 litres / hour - Peak cooling capacity*: 500 litres / hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 litres / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption per 100 litres: 1.5 - 2.5 kWh * at inlet temperature +17.5°C and outlet temperature +2.5°C

Stanje: rabljeno, Technical details: Voltage: 360–730 V / 50 Hz Approximate machine weight: 0.150 t Iijdeu N Afyopfx Aptef

Stanje: rabljeno, Technical details: Circulation medium: Compressed air Dimensions (L x W x H): 0.9 x 1.3 x 1.9 m Plastic granulate dosing unit Iiedpfx Aou Nu Sfeptjf Sheet steel construction with angle steel base frame External control Feed hopper: - Size (L x W x H): 1250 x 670 x 680 mm - Capacity approx. 400 liters - Granulate supply connection: 1x blanking plug and 1x pipe 300/400 mm; filling via 2x threaded connections on the top - Outlet: control via abrasive dosing valve connection (1x open + 1x closed) and compressed air connection 1 1/2" x 450 mm Dosing containers: - 2 containers, size Ø 300 x 560 mm - Outlet 1x 1 1/4" and 1x 1" - Each fitted with 1x fill level measuring unit - Air connection 2" - Water separator model F602G10WJ/N, max. pressure 17 bar / 250 PSI; max. temperature 65°C / 150°F The components/assemblies are offered for sale as described at the listed price.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), 1 used feed water tank ----- Cylindrical horizontal design on saddle supports, insulated, equipped with deaerator Capacity approx.: 5,900 l Max. permissible operating pressure: 0 / +6 bar Iisdpjmfq Rksfx Aptof Max. permissible operating temperature: 0 / +200° C Year of manufacture: 2012

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, • 4 new EDI cells MK3 are available • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled Iodjwy Uu Aopfx Aptjif

Stanje: zelo dobro (rabljeno), Črpalka za hladilno vodo, centrifugalna črpalka, vodna črpalka, črpalka za hladilno tekočino, črpalka za vrtalno vodo, črpalka za odpadno vodo - Črpalka za odpadno vodo: za grobo zrnatost - Pogon: 15 kW 980 min⁻¹ - Najv. pretok: m³/h Ijdpfszdt E Sox Aptoif - Najv. dvižna višina: m - Dimenzije: 1140/470/H505 mm - Teža: 331 kg

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno), Distillation unit for the production of water for infusion solutions Iodpjfla Emjfx Aptoif

Stanje: rabljeno, Naprava za ločevanje olja in vode KAESER BEKO tip Öwamat Premer rezervoarja: 600 mm Skupna višina: 1200 mm Isdpfx Asy Ty Saepteif z aktivnim ogljikovim filtrom Potrebni prostor: Ø 700 x 1200 mm Lastna teža: cca 30 kg dobro stanje

Stanje: rabljeno, Parker Hiross sušač za komprimovani vazduh za kompresorske sisteme Mehanički separator kondenzata, separator vode Hladni sušač sa vodenohlađenim naknadnim hladnjakom za uklanjanje vodene pare i hlađenje komprimovanog vazduha ili gasova. 1 komad naknadni hladnjak tip WFN009 DHH16 Protok vazduha (normalno): 540 m3/h = 9000 litara/min. Radni pritisak vazduha: max. 16 bar Dužina kućišta: 1020 mm Prečnik kućišta: Ø 105 mm Navojni priključak za vazduh: G 2" Navojni priključak za vodu: G 3/4" Težina naknadnog hladnjaka: 11 kg Dimenzije naknadnog hladnjaka (D x Š x V): 1030 x 850 x 200 mm + 1 komad separator vode tip CSP 008 Protok (normalno): 480 m3/h = 8000 litara/min. Radni pritisak: max. 16 bar Navojni priključak: G 2" - Kućište filtera od aluminijuma Isdpfxodzqn Uo Aptoif + 1 komad mehanički separator kondenzata HIROSS SAC 120 Navojni priključci: R 1/2" Radni pritisak: 16 bar Zapremina: 0,8 litara - radi bez gubitka komprimovanog vazduha sve montirano kao što se vidi na slikama Visina montaže u stojećem položaju: 2000 mm Ukupna težina oko 40 kg

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 45.000 h, številka stroja/vozila: LC514, Used SIDEL bottling line for still water up to 12,000 bottles per hour (bph) Main features of the bottling line: The used SIDEL bottling line for still water up to 12,000 bottles per hour offers high standards in productivity and precision. Furthermore, the system outputs 12,000 bottles per hour, making it suitable for medium to high production capacities. The line processes PET containers and handles formats from 0.33 L to 1.5 L. Iiedpfx Ajvgva Ujptjf Additionally, this line uses a volumetric filling system that ensures precise dosing for every bottle. It supports containers with neck diameters between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, ensuring a specific and dedicated production flow. Details of the machines in the used SIDEL bottling line for still water up to 12,000 bph: Blow Molding Machine The Sidel SBO 8 blow molder, built in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high-pressure compressed air. Thus, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filler Monobloc The Sidel 36 36 9 filler monobloc, also from 2005, performs rinsing, filling, and capping in one compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system provides precise dosages, ensuring consistent end product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, built in 2005, applies wrap-around labels to the bottles. The advanced technology applies labels with accuracy, enhancing the appearance of the finished product. This system is ideal for PET water bottles and meets requirements for line speed and quality. Shrink Wrapper The Sidel Cermex shrink wrapping machine from 2005 manages the secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. This process improves logistics and product distribution and protects the items during transportation. Conveyors in the used SIDEL bottling line for still water up to 12,000 bph: The line operates with a complete system of conveyors, including both air conveyors and floor conveyors. These conveyors ensure a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line: This used filling line offers reliability and robustness, despite its 2005 manufacturing year. Furthermore, all machines ensure long operational lifespans and reduced maintenance costs. The system efficiently bottles still water and guarantees a specific and contamination-free process. Moreover, the SIDEL system can be seamlessly integrated with complementary equipment such as the labeling machine and shrink wrapper for a consistent production flow. With a speed of 12,000 bottles per hour, this line supports the requirements of demanding production environments.

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: LC564, Used SIDEL bottling line for still water in PET bottles, 25,200 bph The used SIDEL bottling line for still water in PET bottles, 25,200 bph, offers a complete solution for bottling still water. The line remains connected to the power supply, allowing buyers to perform direct testing on-site. SIDEL developed the system in 2006 for processing PET bottles from 350 ml up to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line information This pre-owned SIDEL bottling line for still water in PET bottles processes up to 25,200 bottles per hour. Specifically, bottles with a 30/25-neck finish are used, corresponding to the industry standard. SIDEL equipped the line with an SB014 blow-molding machine featuring 14 cavities. In addition, the filling-capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Key installed equipment The series includes, among others, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). Moreover, a BAC cooling tower effectively controls process temperatures. The SIDEL SB014 blow molder, which includes a hopper, feeder, and deduster, is directly connected to the SIDEL SFGL40/10 filler. This set-up ensures optimal efficiency throughout all stages of the plant. Ijdpfew Ahfyox Apteif Labelling and packaging SIDEL has integrated a Rollquattro labelling machine, which applies wrap-around roll-fed labels with precision. In addition, a shrink tunnel packages stable multipacks using plastic film. The VANTA WSD-B350 case packer, built in 2011, processes up to 35 cartons per minute. Automated palletizing completes the end-of-line phase and prepares products for shipping. Conveying technology and internal logistics Throughout production, the conveying system is equipped with conveyors built by SIDEL, ensuring uninterrupted flow from blow molder to palletizer. Thanks to this high level of automation, the system reduces manual intervention and boosts consistency. Unlike fragmented setups, this configuration improves operational control and minimizes downtime. Operating conditions and benefits This used SIDEL bottling line for still water in PET bottles, rated at 25,200 bph, is operational and available for on-site testing. In practice, the integration of SIDEL machinery enhances overall performance and simplifies maintenance. As a result, operators can rely on consistent quality and long-term reliability. Applications and compatibility

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: LC574, Technische Spezifikationen & Leistungsdaten Diese gebrauchte Abfüllanlage ist eine komplette isobare PET-Lösung, ausgelegt für die Hochleistungsproduktion von stillem Wasser, Mineralwasser und kohlensäurehaltigen Erfrischungsgetränken. Sie basiert auf robusten Krones- und Simonazzi-Prozessmaschinen mit einer Sidel SBO14 S2 Streckblasmaschine und bietet zuverlässige industrielle Verpackungsleistung bei gleichbleibender Produktqualität. Anlagentyp: Gebrauchte isobare Komplettabfülllinie für PET (Second-Hand) Iiodpfx Aow D E Ubsptef Nennleistung: bis zu 18.000 Flaschen/Stunde (ausgelegt für 2,0 l PET; formatabhängig) Flaschenformate: 0,10 l und 2,0 l; weitere Formate mit Umrüstsätzen möglich Gebindetyp: PET (Luftfördertechnologie) Produktspektrum: Wasser (still und karbonisiert), CSD Kerntechnologie: Isobarische Spül-/Füll-/Verschließ-Monoblock mit nachgelagerter Etikettierung und Endverpackung Linienumfang: Ca. 14 integrierte Maschinen, darunter Streckblasmaschine, Luftförderer, Flaschenspüler, isobarer Füller, Verschließer, Etikettierer, Packer/Shrinkpacker, Palettierer, Stretchwickler, Inspektions- und Kodierlösungen Haupthersteller: Krones, Simonazzi; Streckblasmaschine: Sidel SBO14 S2 Baujahre: Hauptlinie 2000; Blasmaschine 1999 Zustand: Betriebsbereit, inklusive Sicherheitseinrichtungen Erweiterte Automations- & Steuerungssysteme Zentralisierte SPS/HMI-Steuerung koordiniert Streckblasen, Spülen, isobares Füllen, Verschließen, Etikettieren und End-of-Line-Prozesse. Rezeptverwaltung unterstützt Format- und Produktwechsel; synchronisierte Fördertechnik und frequenzgeregelte Antriebe sorgen für stetigen Hochleistungsbetrieb. Anlagenpuffer und Ausleitsysteme für fehlerhafte Flaschen minimieren Stillstand und Ausschuss. Automatisierungsgrad: Vollintegrierter, rezeptgesteuerter Betrieb Bedienoberfläche: Intuitives HMI mit Alarmdiagnose und Produktionsberichten Elektrik: Industrieller 3-Phasen-Anschluss (typisch 400–460 V, 50/60 Hz; Kontrolle bei Besichtigung empfohlen) Sicherheit: Verriegelte Schutzeinrichtungen, zentraler Not-Aus, sicherheitsgerichtete Schaltungen Produktionslinienintegration Die Linie ist für nahtlose Integration im Abfüll- und Verpackungsbereich konzipiert. Sie verbindet sich upstream mit Preform-Handlingsystemen und dem Sirupraum/Premixer, downstream mit Packern, Palettierern und der Lagerlogistik. Schnelle Formatwechsel und klar definierte Umrüstsätze ermöglichen effizienten Wechsel zwischen Flaschengrößen und Produkttypen/SKUs. Kompatibel mit allen gängigen Versorgungsmedien für Getränkeproduktion (CIP, CO₂, Kühlwasser) Schnittstellen für Inspektionssysteme, Laser-/Inkjet-Codierung und Bildverarbeitung Modulare Fördertechnik erlaubt Anpassung an individuelle Hallenlayouts und spätere Erweiterungen Maschinenzustand & Wartungshistorie Diese gebrauchte Komplettanlage befindet sich in betriebsbereitem Zustand und ist mit den vorgesehenen Sicherheitsvorrichtungen ausgestattet. Die Maschinen wurden im Produktionsumfeld instandgehalten und auf Funktionsfähigkeit geprüft. Wartungsprotokolle, Dokumentation sowie Aufstellungspläne können bei einer technischen Besichtigung bereitgestellt werden.

Stanje: generalkompletno obnovljen (rabljeno), 60 m³ / 60,000 L Firefighting Water Tank According to DIN 14230 Tank volume: 60,000 litres / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, grade S 235 JRG 2 Underground tank for subterranean storage, single- or double-walled, suitable for pedestrian and drive-over areas (load class SLW 30) with 1 manhole (external diameter 720 mm), equipped with blank cover, gasket and bolts. Available immediately either new or used! The tank is emptied, cleaned, refurbished and professionally leak-tested by our certified workshop. Iiodpfxshh Sruo Aptsf The tank complies with the requirements of DIN 14230 (Underground Firefighting Water Tank): - Firefighting water suction connection in accordance with DIN 14244, fitted with a fire brigade coupling / fixed coupling type A as per DIN 14319, design type B, without level gauge - Ventilation flange nozzle NWN 100 with cap, overall length approx. 1,300 mm, suitable for 800 mm underground coverage and 500 mm above ground - Exterior protected by bitumen coating - Upon request, we can provide an internal full lining with bitumen-based or epoxy resin coating (for corrosion protection) - It is also possible to fit the tank with an internal plastic liner Cost-effective delivery with our own truck is available. Simply provide your delivery location and you will immediately receive the exact freight costs. Inspection by appointment is possible at any time. If you need further information, please call us or send an e-mail to b.barth(at)barth-tank.de We also accept trade-ins and purchase tanks/containers of all kinds. Please contact us for details. We always have tanks of similar types in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: M316, Technical specifications and performance data This electronic filling monoblock combines rinsing, isobaric filling, and capping on a compact rotary platform developed by Krones. Optimized for PET bottles and carbonated water, it delivers high performance with outstanding process stability and hygiene. The configuration features an 80-valve filler, a 60-gripper rinser, and a Zalkin capper with 15 heads, utilizing neck handling for precise container guidance. Production capacity: up to 25,000 bottles/h Current bottle format: 0.5 L Container material: PET Neck handling: Yes (neck transfer) Neck finish: Alaska Filling valves: 80 Capping heads: 15 (Zalkin) CO2 management: Yes (isobaric filling for carbonated products) Machine type: Rotary Rotation direction: counterclockwise Pitch: 111 mm Maximum container height: 320 mm Working height: 1200 mm Manufacturer: Krones Advanced automation and control systems The monoblock features Krones HMI interfaces for simplified operation and diagnostics. Special control panels labeled KFS-3 and KRS-1 provide clear process monitoring, real-time production counters, and guided functions such as resetting production counters, managing fault lists, and lamp tests. Operator interaction is streamlined via an intuitive keypad with context-sensitive help and status displays across the machine modules. Integrated Krones HMI panels Real-time production counter and status visualization Programmable function keys for quick operation Emergency stop circuits and secured operator stations Integration capability in production lines Designed for industrial packaging environments, this used component of a filling line can be operated as part of a complete beverage production plant or as a standalone monoblock. Neck handling ensures stable throughput with lightweight PET formats, while the rotary architecture supports fast format changeovers between compatible sizes. Inline integration with upstream and downstream conveyors Suitable for PET bottle handling with neck transfer Format flexibility around 0.5 L, with potential for adjacent sizes depending on format parts Ideal for still and carbonated water in beverage production Isdsyr Hvuspfx Aptsif Machine condition and maintenance history The monoblock was removed from regular production approximately three months ago; no issues were reported. It is in excellent operating condition and ready for immediate shipment. Operating condition: ready for operation Time since last production: approx. 3 months Condition: excellent; fully functional at the time of decommissioning