Čistilne Naprave Za Vodo nakup rabljenega (97.354)

Stanje: rabljeno, številka stroja/vozila: 006158, Max. panel width: 1000 mm Hfodpoiwptujfx Adksk Max. panel length: 2500 mm Number of injectors: 14 Positioning via NC control: yes

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hfsdpfxst Hw D Ro Adkjk Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Hfedpfxot Hwxbj Adkjk Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Modul – maks. 2 Dolžina rezkalnika: 135 mm Skupna potrebna moč: 2,2 kW Masa stroja: pribl. 1420 kg Potreben prostor: pribl. 2,00 x 1,60 x 1,43 m --> Tehnični podatki: največji premer rezkalnika: Ø 150 mm --> največja dolžina rezkalnika: 135 mm --> največji modul: 2 --> premer vretena: Ø 24 mm Hfjdpfx Adszkvuvskjk --> vpenjalna priprava vretena: MK-4 --> hitrosti vretena: 140 – 1120 vrt/min. --> avtomatski pomiki Oprema in dodatna oprema: sistem za hlajenje, rezkalniki, zamenljiva kolesa, navodila za uporabo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rezalnik Grasselli KSL 4 Hedpfeztxyaex Adkofk Ta rezalnik Grasselli KSL je horizontalni rezalni stroj, posebej zasnovan za rezanje mesa, perutnine, rib, zelenjave in sadja. Stroj lahko obdeluje tako sveže kot kuhano meso. Ta rezalnik je idealen za manjše in srednje velike obrate za predelavo hrane. Rezalnik združuje kompaktno zasnovo z visoko zmogljivostjo rezanja, do 2.000 kg/h. Zagotavlja zelo natančno rezanje in lahko obdeluje občutljive izdelke, ne da bi jih poškodoval. Ta horizontalni rezalnik je mogoče integrirati v proizvodno linijo za popolnoma avtomatiziran proizvodni proces. Higienska zasnova omogoča hitro in enostavno čiščenje. Stroj je v celoti izdelan iz nerjavečega jekla. Izdelek se na rezalni okvir transportira s transportnim trakom, pritiskni trak pa ohranja stabilnost izdelka med potekom skozi rezila. Tehnične specifikacije: - Proizvodna zmogljivost: do 2.000 kg/h - Največja višina izdelka: 100 mm - Delovna širina: 380 mm - Vključen rezalni set: 5 mm - Dodatne možnosti debeline rezanja: 2,5–10 mm, nastavljivo v korakih po 0,5 mm - Napetost: 400 V (3 + N, 50 Hz) - Moč: 5,8 kW - Leto izdelave: 2017 - Teža: 718 kg - Priključek za stisnjeni zrak: 7 bar - Dimenzije (Š x G x V): 1.490 x 1.840 x 1.350 mm

Stanje: rabljeno, Horizontalna vrtalno-rezilna stroj CORNAC C100 Pomik X: 1000 mm Pomik Y: 1000 mm Pomik Z: 1260 mm Fiksna miza Stožec: SA 50 Vreteno: Ø 100 mm Izhod vretena: 550 mm Število vrtljajev: od 10 do 1250 min⁻¹ Dimenzije mize: 1550 x 980 mm Obdelovalna plošča: Ø 520 mm Motor vretena: 9,5 kW Hodpfezmx Nzox Adkjfk Merilni sistem 3 osi HEIDENHAIN Samodejni pomiki: X - Y - Z Priložen komplet stožcev Napetost: 380 V Dimenzije (D x Š x V): 4500 x 2100 x 2450 mm Teža: pribl. 8 T

Stanje: dober (rabljeno), • Completely overhauled by us, immediately ready for use • Type: 100013 Hsdper Nvldofx Adkefk • Serial number: 011136 • Glass thickness: 2-12 mm • Minimum glass dimension: 120 x 80 mm • Maximum washing width: 1000 mm • Dimensions: L=2900 mm W=1650 mm H=1250 mm • Roller spacing: 55 mm • 3 pairs of brushes / 1 pair of squeegees • Electrical connection: 380V/50Hz, 13 kW • Price on request

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Hodevz Ec Iopfx Adkjfk Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Dra8M7 - Documentation

Leto izdelave: 1963, stanje: rabljeno, številka stroja/vozila: 18135, Broaching machine - horizontal Hodpsbrcy Nsfx Adkefk Manufacturer: Forst Model: RIW 100/2200 Tensile force: 100 tonnes Stroke: 2,200 mm Crane available separately under listing Y941

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2105 mm Mere globina 3485 mm Teža stroja 7500 kg Krmilna enota Znamka MAZATROL Glavni pogon Območje vrtljajev vretena 3500–5000 vrt/min Premer vretena 61 mm Število osi 4 Pomiki Pomik X-osi 530 mm Podajalna sila X-osi 0–6000 mm/min Hfsdpfx Asx D N Ipodkjk Hitri pomik X-osi 30 m/min Pomik Y-osi ±70 mm Podajalna sila Y-osi 0–6000 mm/min Hitri pomik Y-osi 15 m/min Pomik Z-osi 1065 mm Podajalna sila Z-osi 0–6000 mm/min Hitri pomik Z-osi 33 m/min Konjiček Premer pinole 80 mm Hod pinole 870 mm Stožec pinole MK4 Orodja Število postaj 20 Največja teža orodja 7 kg Največji premer orodja 90 mm Največja dolžina orodja 250 mm Ta 4-osni Mazak INTEGREX 200 Y je bil izdelan leta 2000. Odlikuje ga največji premer struženja 540 mm, premer zamaha 540 mm ter zmogljivost premera palice 51 mm. Stroj omogoča obdelavo kosov mase do 150 kg ter ponuja področje vrtljajev vretena do 5.000 vrt/min. Opremljen je z Mazak KM 63 sistemom za hitro menjavo orodij s 20 mesti. Če iščete visokokakovostne stružne zmogljivosti, razmislite o našem stroju Mazak INTEGREX 200 Y v prodaji. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: MITSUBISHI Model: M70 Glavni pogon Število osi: 6 Hitrost vretena: 4000 obr/min Tehnične specifikacije Protipremerno vreteno: da Pogonska orodja: da Ta 6-osni Quick-Tech i60 twin je bil izdelan leta 2016 in vključuje CNC stružnico z B-osjo in pogonskimi orodji. Ima glavno vreteno z izvrtino 60 mm, pomožno vreteno z izvrtino 42 mm in največjo dolžino struženja 300 mm. Stroj omogoča simultano 4-osno obdelavo, popolno programiranje osi in ima krmilni sistem Mitsubishi M70. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Quick-Tech i60 twin. Za več informacij o tem stroju nas kontaktirajte. Uporabniške vrste Hfsdpfx Adex D Iftoksk Struženje

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 130 mm Širina kolesa 180 mm Modul - maks. 2,5 Modul - min. 0,3 Hitrost vrtenja 140 - 900 vrt/min Število zob - min. 4 Hedpfxoy Umizj Adkjfk Največja vpenjalna dolžina 200 mm Krmiljenje Siemens Premer obdelovanca - maks. 80 mm Skupna potrebna moč 3,5 kW Teža stroja pribl. 2,9 t Potreben prostor pribl. 1,8 x 1,6 x 1,9 m

Stanje: novo, Pressure: 100 Oil Tank Capacity: 120 Bending Capacity (Flat Material): 320 x 24 Bending Capacity (Round Tubes): 114 x 10 Pressure: 285 Working Speed: 10 Return Speed: 10 Motor: 10 Table Area: 750 x 1425 Working Height: 930 Length: 1430 Width: 750 Height: 1450 Approx. Weight: 1700 Stroke: 285 UZMA Hydraulic Horizontal Presses with multidirectional functionality allow for a wide range of operations such as bending, punching, straightening, etc., applicable to tubes, flat bars, profiles, rods, and a variety of materials. Thanks to the quick tool change system, materials such as sheet metal, tubes, profiles, and rods can be processed quickly and efficiently using suitable dies without any downtime. Versatile control features and ease of operation are the hallmark of UZMA. The horizontal press machine is an essential asset for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment with digital display - Manual or automatic operating modes - Easy tool change with quick-change system - Durable construction of tools and guides from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools Hjdor I H Axspfx Adkofk

Stanje: novo, Oil tank capacity: 12 Bending capacity (flat material): 200 x 12 Bending capacity (round tubes): 48 x 4.0 Pressure: 20 Working speed: 10 Return speed: 10 Motor: 2.2 Table size: 480 x 1060 Working height: 930 Length: 1150 Hedpjr I H A Asfx Adkefk Width: 480 Height: 1200 Stroke: 185 Approx. weight: 530 UZMA hydraulic horizontal presses with multi-directional functionality allow for a wide range of operations—such as bending, punching, straightening, and more—on tubes, flat bars, profiles, rods, and various other materials. The rapid tool change system enables fast bending of sheet metal, pipes, profiles, and rods with suitable dies, minimizing downtime. UZMA stands out for its versatile functionality and user-friendly operation. The horizontal bending press is an indispensable machine for metalworking shops. Standard Accessories: - Standard accessory package - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operation mode - Quick tool changes thanks to the rapid-change system - Durable tooling and guide construction made from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools

Stanje: novo, Oil tank capacity: 40 Bending capacity (flat material): 200 x 18 Bending capacity (round pipes): 60 x 4.0 Pressure: 30 Working speed: 10 Return speed: 10 Motor: 3 Table area: 660 x 1250 Working height: 930 Length: 1250 Width: 650 Height: 1250 Stroke: 285 Weight approx.: 1050 Hfjdpfjr I H A Hox Adkok UZMA hydraulic horizontal presses with multidirectional functionality enable a wide range of operations such as bending, punching, straightening, etc., on pipes, flat bars, profiles, rods, and all types of materials. The quick tool change system allows for rapid forming of sheet metal, pipes, profiles, and rods with suitable dies, minimizing downtime. UZMA stands out for its versatile operation options and user-friendly controls. The horizontal bending press is an essential machine for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operating modes - Quick and easy tool change system - Durable tool and guide construction from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending dies

Stanje: novo, Oil tank capacity: 40 l Bending capacity (Flat material): 200 x 18 mm Bending capacity (Round tubes): 60 x 4.0 mm Pressure: 40 t Working speed: 10 mm/s Return speed: 10 mm/s Motor: 3 kW Table size: 660 x 1250 mm Working height: 930 mm Length: 1250 mm Width: 650 mm Hsdpor I H A Rjfx Adkefk Height: 1250 mm Stroke: 285 mm UZMA hydraulic horizontal presses with multi-directional functionality allow for a wide range of operations such as bending, punching, straightening, etc., on tubes, flat bars, profiles, rods, and all kinds of materials. With the quick tool change system, you can quickly bend materials such as sheet metal, tubes, profiles, and rods with suitable dies without loss of time. Versatile operation functions and easy handling are distinguishing features of UZMA. A horizontal press machine is an indispensable machine for metalworking companies. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operation system - Easy tool change with quick-change system - Durable tool holders and guides made of high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools

Stanje: novo, Oil tank capacity: 60 L Bending capacity (flat material): 300 x 15 mm Bending capacity (round tubes): 76 x 4.0 mm Pressure: 50 t Working speed: 10 mm/s Return speed: 10 mm/s Motor: 5.5 kW Table size: 600 x 1250 mm Working height: 930 mm Length: 1400 mm Width: 600 mm Height: 1500 mm Stroke: 285 mm Approx. weight: 1050 kg UZMA hydraulic horizontal presses with multidirectional function are suitable for pipes, flat bars, profiles, rods, and all types of materials, enabling a wide range of operations such as bending, punching, straightening, etc. Thanks to the quick tool change system, you can rapidly bend materials like sheet metal, pipes, profiles, and bars with suitable dies, all without any time loss. The versatile operating functions and ease of use are hallmarks of UZMA. Hfodper I H A Ujfx Adkjk A horizontal press machine is an indispensable piece of equipment for metalworking companies. Standard accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic working mode - Easy tool change with quick-change system - Durable tool and guide construction from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of press brake tools

Stanje: novo, Oil tank capacity: 120 Bending capacity (flat material): 320 x 15 Bending capacity (round tubes): 114 x 8 Pressure: 80 Working speed: 10 Return speed: 10 Motor: 10 Table surface: 750 x 1425 Working height: 930 Length: 1430 Hedpfxsr I H Dcs Adkefk Width: 750 Height: 1450 Weight approx.: 1700 Stroke: 285 UZMA hydraulic horizontal presses with multidirectional functionality enable a wide range of operations such as bending, punching, straightening, etc. on pipes, flat bars, profiles, rods and all kinds of materials. With the quick-change tooling system, materials such as sheet metal, pipes, profiles, and rods can be bent rapidly using appropriate dies, minimizing downtime. UZMA stands out for its versatile operation modes and user-friendly controls. A horizontal press is an essential machine for metalworking shops. Standard accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment with digital display - Manual or automatic operation mode - Easy tool change with quick-change system - Durable tooling and guides made of high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools

Stanje: dober (rabljeno), Premer kolesa - max. 145 mm Širina kolesa 110 mm Modul - max. 2 Modul - min. 0,3 Hitrost vrtenja 112 - 1000 obr/min Število zob - min. 6 Največja vpenjalna dolžina 150 mm Skupna potrebna moč 3,5 kW Teža stroja pribl. 1,3 t Hfjdpey Ivdhefx Adksk Potrebni prostor pribl. 1,3 x 0,8 x 1,4 m

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Fully automatic horizontal small bundle wrapping machine Automatic wrapping cycle with two standard modes: - Full wrapping - Head and tail wrapping only (see brochure) Complete plant with roller conveyors and return section to operator Very good condition Hfodpfxspfdh Ne Adkok

Leto izdelave: 2018, obratovalne ure: 5.080 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja 4700 kg Višina stroja 1852 mm Dimenzije Hfjdpfx Adox D Huaokek Dolžina stroja 1928 mm Krmilna enota Znamka SIEMENS Model 840D Glavni pogon Število osi 3 Hitrost vretena 5000 min⁻¹ Moč motorja vretena 16,5 kW Pomiki Pomik po osi X 242,5 mm Pomik po osi Z 540 mm Pomik po osi Y 80 mm Tehnične specifikacije Pogonska orodja da Ta 3-osni stroj DMG CLX 350 V4 je bil izdelan leta 2018 in ima maksimalni premer struženja 320 mm, hitrost vretena do 5000 min⁻¹ ter premer prehoda palice Ø 65 mm. Opremljen je z revolversko glavo VDI 30 z 12 postajami za pogonska orodja, kar poveča prilagodljivost stroja. Idealen je za precizno struženje s hitrimi hodovi in Siemens 840D sl krmiljenjem za napredne postopke. Za dodatne informacije o stroju nas kontaktirajte. Uporaba Struženje

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Hfjdpevzhf Ssfx Adksk Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2620 mm Mere dolžina 4865 mm Teža stroja 11700 kg Krmilna enota Znamka OKUMA Model n/a Glavni pogon Območje hitrosti vretena 3500 Vpenjalna konusnica ASA 8 Hfedpfx Asx D R Rfedkek Število osi 2 Pomiki Pomik po osi X 230 mm Pomik po osi Z 670 mm Revolver glava Vpenjalna konusnica VDI 40 Ta 3-osni stroj Okuma LB 25 II-M je bil izdelan leta 1998. Gre za robusten horizontalni stružni stroj z Okuma OSP 5020L krmiljem, ki omogoča hitrost vretena do 3.500 obr/min in revolversko glavo z 12 pozicijami za orodja. Omogoča obdelavo premera do Ø 420 mm in dolžine do 1.250 mm. Razmislite o nakupu tega horizontalnega stružnega stroja Okuma LB 25 II-M. Za več informacij nas kontaktirajte. Uporaba Struženje

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število vretenc: 2 Območje hitrosti vretena: 6000 Število osi: 6 Gibi Pomik Y-osi: ±31 mm Hitri pomik Y-osi: 6 m/min Pomik B-osi: 525 mm Hsdpfx Asx D Rqxsdkefk Hitri pomik B-osi: 40 m/min Hitri pomik C-osi: 600 vrt/min Ta 6-osni NAKAMURA WT-100 je bil izdelan leta 2019 in ima dvoje vreten s hitrostjo 6.000 vrt/min ter močjo motorja 11/7,5 kW vsakega. Ima prebojno sposobnost palic do Ø42 mm ter maksimalni premer struženja Ø190 mm. Stroj vključuje dodekagonalni revolverski nosilec z 24 pozicijami in omogoča hitre pomike do 40 m/min. Če iščete kakovostne stružne zmogljivosti, upoštevajte naš stroj NAKAMURA WT-100. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 1991, Machine weight approx. 6 t The design of the base machine is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece is mounted between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive range of accessories Technical data: - Maximum module for gear hobbing cutters according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece diameter for manual loading: 200 mm - Max. workpiece diameter for automatic loading: 150 mm - Maximum workpiece length: 400 mm - Largest / smallest cutter diameter: 102 / 40 mm - Maximum cutter length: 230 mm - Largest / smallest cutter arbor diameter (standard): 32 / 16 mm - Axial slide travel = maximum milling length Z-axis: 300 mm - Radial slide travel X-axis: 140 mm - Shift slide travel (shift movement) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swiveling angle of shift milling head (left/right) A-axis: 50° / 60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm (*assuming '1ß0' is a typo for 100) - Y-axis (front face of milling spindle): 50 - 230 mm - W-axis (front face of tailstock spindle): 165 - 585 mm Hjdpfjub Amfex Adksfk - Cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min