Uchida Avtomatski Sistem Rezanja nakup rabljenega (11.497)

Stanje: novo, Leto izdelave: 2025, Laser power: 12,000 watts Working area during laser operation: 4,000 x 2,000 x 270 mm Positioning speed X/Y/Z: 200 m/min Iodpfxov Uz Tio Alasat Simultaneous: 280 m/min Max. workpiece weight: 3,000 kg Max. mild steel thickness: 30 mm Max. stainless steel thickness: 30 mm Max. aluminium thickness: 25 mm Max. copper thickness: 10 mm Max. brass thickness: 20 mm Length: 12,500 mm Width: 3,650 mm Height: 2,620 mm Machine weight: 18,000 kg Standard equipment Main components 1. Fiber laser source: D-Soar (_CE&UL), Raycus 2. Cutting head: Bystronic DNE Copyright 3. Cutting software: Hypcut FSCUT 8000C Bus Control 4. Rack and pinion (X & Y axis): M3 by Herion 5. Shuttle table: Parallel shuttle table (dual layer) 6. Ball screw: TBI (Taiwan) 7. Linear guide rail: Won (South Korea) 8. Gear reducer: Neugart (Germany) 9. Servo drive and motor: Inovance or Schneider 10. Machine bed: Welded machine frame 11. PC: Intel i7 CPU, 8GB RAM, 120GB SSD, 10kW 12. Monitor: Capacitive touchscreen (21.5", XC-2209CMDR) 13. Proportional valve: Felton Low Pressure, 10kW 14. PLC hardware: Schneider 15. Solenoid valve: High pressure: CEME; Low pressure: Airtac 16. Gantry: Aerospace aluminum cutting bridge, steel die-cast 17. Chiller: S&A, custom 18. Electrical control cabinet: Independent control panel (Bystronic DNE Copyright) Electrical connection (machine incl. laser source and chiller) The supply voltage provided by the utility must meet the requirements of EN 50160 and IEC 60364-1. Stable voltage is a prerequisite for reliable performance. Power supply must remain consistent across the full network tolerance and not be subject to voltage fluctuations, such as those caused by spot welding systems. If such quality of power supply cannot be guaranteed on site, the system must be equipped with a transformer and/or a voltage stabilizer. Machine power supply, incl. laser module: Phases: 3 phases & PE Supply system: TN Main frequency: 50/60 Hz Supply voltage: 3 x 380 V Max. allowable voltage fluctuation 50 Hz: +/- 10% Max. allowable voltage fluctuation 60 Hz: +6/-13 % Main fuse: 150 AT Machine: 9 kW Hydraulic shuttle table: 15 kW Extraction: 7.5 kW Resonator: 36 kW Chiller: 15 kW Total nominal power consumption*: 80.5 kW Power factor (cos φ): 0.83 Average power demand: 30.75 kW * Values measured at full laser power and ambient temperature of 20°C. Values are based on an average material mix assumption. Compressed air (machine, laser source, chiller, extraction) Compressed air quality in accordance with ISO 8573-1:2001. To prevent contamination from the compressor, an oil-free screw compressor with downstream air treatment (dryer) is required. Min. supply pressure at supply unit: 20 bar Maximum consumption: 1.05 m³/min Max. compressed air temperature at maintenance unit inlet: 43°C

Stanje: novo, Leto izdelave: 2025, Moč laserja: 6000 W Delovno območje pri delovanju laserja: 3050 x 1550 x 270 mm Pozicijska hitrost X/Y/Z: 90 m/min Iaodpsxq Rczsfx Alajt Sočasno: 120 m/min Največja teža obdelovanca: 1000 kg Maks. debelina konstrukcijskega jekla: 20 mm Maks. debelina nerjavečega jekla: 16 mm Maks. debelina aluminija: 14 mm Maks. debelina bakra: 8 mm Maks. debelina medenine: 14 mm Dolžina: 10.050 mm Širina: 5.100 mm Višina: 2.600 mm Teža stroja: 8.100 kg Skupna priključna moč: 54 kW

Stanje: novo, Leto izdelave: 2025, Laser power: 30,000 watts Laser working area: 28,000 x 4,000 mm Positioning accuracy X/Y/Z: 0.1 mm / 10 m Max. workpiece weight: 30,000 kg Max. mild steel thickness: 60 mm Max. stainless steel thickness: 50 mm Max. aluminium thickness: 40 mm Max. copper thickness: 20 mm Max. brass thickness: 20 mm Length: 35,500 mm Width: 11,000 mm Height: 3,000 mm Machine weight: 45,000 kg Standard equipment - Fixed machine table - Fiber source: Raycus - Cutting head: DNE by Power - Linear guides: HIWI Taiwan - M3 rack and pinion: Herion / Güdel - Planetary gearboxes: Neugart - Servo drives: Yaskawa Iasdpfxsv U A Nxs Alaot - PLC hardware: Schneider Additional equipment Optional with bevel cutting

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Operating pressure: 160 bar Iodpfxou Icxdo Alaoat Stand width: 2000 mm Throat depth: 1000 mm Operating pressure (pneumatic): min/max 6/8 bar Operating pressure (hydraulic): min/max 160/210 bar Operating voltage: 380 V / 50 Hz Table size: 1900 x 1000 mm Height above floor: 1000 mm Tool clamping area: 1600 x 350 mm Oil capacity: 400 l Total power requirement: 25.0 kW Machine weight approx.: 7.1 t Control cabinet dimensions (LxWxH): 1.0 x 0.3 x 1.4 m Machine dimensions approx. (LxWxH): approx. L: 2.2 x W: 3.4 x H: 2.2 m FOLDING PUNCHING DEVICE or CUTTING PRESS or HYDRAULIC FOLDING PRESS The machine is equipped with the tool "table punching device for blank carriers". Two machines are available for sale! The machine was used for punching holes in automotive dashboard panels (upper and lower die). On the machine table, product holders and sliding units for trimming and hole punching are mounted. Features: - Light barrier - Hydraulic unit - Control cabinet - Control panel - Piece counter display - Manual and automatic operation possible - Emergency stop Sold as is! i.D..

Stanje: skoraj kot novo (rabljeno), Min. input length: 500 mm, max. 6 m. Cross-section: max. 140 x 250 mm Motor: 5.5 kW Saw stroke: servo swing arm Feed via rollers, 6 top, 6 bottom CNC control Maxi 8.0 Iasdpfxer A Et Ts Alaot 1 x sorting unit, each 11.5 m Machine will be configured according to your requirements.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Laser type: CO2, Laser power: 2.2 kW, Working area X/Y/Z: 1500 mm / 3000 mm / 100 mm, Max. material thickness: Aluminium: 8 mm, Mild steel: 10 mm, Stainless steel: 6 mm, Max. workpiece weight: 890 kg. Positioning speed X/Y: 100 m/min, Simultaneous positioning speed: 140 m/min, Total power consumption: 37 kW, Max. sheet weight: 70 kg/m². Dimensions X/Y/Z: 6000 mm / 6400 mm / 2150 mm, Weight: approx. 13,500 kg. Iaedpfx Alettv T Sjaet

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Connected load: 30 kW, length: 9,060 mm, width: 4,000 mm, height: 2,900 mm, includes ultrasonic cutting unit, feed unit, control cabinet, safety components, spare parts and documentation. On-site inspection is possible. Iodpfx Aleriuq Ejaoat

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), A like-new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed for 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed for 5kg to 10kg: 10m-40m/min. Housing material: stainless steel. Machine weight: approx. 255kg. Operating hours: less than 50h. The machine shows no wear on the conveyor belt or on the radiation protection curtains. Documentation is available. An on-site inspection is possible. Iedpevzr Auofx Alaoat

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Product: Round 2kg bucket for mozzarella with handle and snap-on lid. Output capacity: 1,600–1,800 buckets/h. Bucket dimensions: 175 x 131 mm. Connected load: 7 kW. Compressed air connection: 6 bar. Length: 2,060 mm. Width: 2,060 mm. Height: 3,200 mm. Weight: approx. 4 t. Two-lane design, includes cup placer, cup inspection, space for installation of a multihead weigher, brine dosing, CIP (Clean-in-Place) execution, snap-on lid station, pressing station, lifting/pushing unit, discharge conveyor, process control, central lubrication, drain channels, and other components. Iaedpowbpyvofx Alajt On-site inspection is possible; the machine has already been dismantled and is ready for loading. Documentation included. The machine has seen little operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Modula Lift ML50D Storage Lift The Modula units are automatic vertical storage systems based on the principle of vertical storage and floor space savings. They allow you to store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula is the result of over 30 years of experience by an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during tray insertion • Dynamic tray location assignment in the unit according to item heights • Frame made from galvanized steel profiles • Vertical drive utilizing Eagle steel-reinforced toothed belts • Extractor guide system with 6 HDPE rollers per side • Tray management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The trays have a width of 4100 mm and a depth of 860 mm, providing a storage surface of 3.53 m² per tray. With 53 trays, this results in a total storage area of 187.09 m². The load capacity per tray is 500 kg, offering a total capacity of 26,500 kg across all 53 trays. Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6,900 mm Tray width: 4,100 mm Tray depth: 857 mm Tray height: 120 mm Tray net load: 500 kg Gross total load: 70,000 kg Ijdpox Rpm Uefx Alajat Device dimensions (internal picking, W x D): 4,517 x 3,165 mm Device dimensions (external picking, W x D): 4,517 x 4,058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 trays/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 53 Can be shortened to 4,900 mm Dismantling costs of over €6,000 are already included Item location: 37308 Geisleden Product video 1 Product video 2 For data sheet, see Documents tab. Financing through our partner bank is also available. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), YZ0105) PANEL SAW WITHOUT REAR TABLE, Model HPP 300/56/56 PROFILINE Control: Power Control POWER TOUCH, Software: CADmatic 4 - Professional No. 1 Rear Push Device – (PACK PREMIUM). No. 11 Clamping Grippers (1 x Power Concept) Max. Cutting Width (mm): 5600. Usable Infeed Stroke (mm): 5600. Max. Saw Blade Projection (mm): 80 Scoring Saw (max. saw diameter/power): 180 mm / 1.5 kW Main Saw (max. saw diameter/power): 350 mm / 11 kW (optionally 18 kW) Adjustable Saw Carriage Feed (m/min): 1 - 150 No. 5 Front Air Cushion Tables (mm 500 x 2810) Label Printer: PICA II 108 YZ0106) AUTOMATED PANEL STORAGE, Model TFL 211/10/05 Total Space Requirement (incl. panel saw): mm 10640 x mm 55660 Mobile Upper Bridge (X-axis) with traversing carriage (Y-axis) and corresponding vacuum suction unit (movable on Z-axis) Max. Speed of Mobile Upper Bridge (X-axis): 110 m/min Carriage Speed (Y-axis): 130 m/min Vacuum Suction Cup Assembly Speed (Z-axis): 70 m/min Vacuum Suction Cup Unit, rotatable by 90° Automated TLF Management System (via scanner) for cut panels (which remain in storage) Minimum dimensions: mm 800 x 2000 Stack Dimensions: Min. mm 2600 x mm 800 / Max. mm 5600 x mm 2200 Panel thicknesses (min/max): mm 12 / 40 Iodpfx Aefg Ewzelaoat Stack Height: mm 1000 Min. Panel Dimensions: mm 800 x 2000. Max. Panel Dimensions: mm 2200 x 5600 (ST 61)

Stanje: rabljeno, Leto izdelave: 2011, skupna višina: 3.900 mm, skupna dolžina: 48.000 mm, skupna širina: 12.000 mm, zahteva za prostor dolžina: 48.000 mm, potrebna širina: 18.000 mm, Oprema: kabina, SAMES avtomatska linija za prašno lakiranje Ponudba vključuje naslednje komponente: Ijdpfxewcfppe Alaoat 1. Avtomatski transportni sistem s premikajočo hitrostjo V=1 m/min z dvigalom podjetja DEMAG 2. Komponente za pripravo površine: - Naprava za pripravo vode - Vodni rezervoarji 3 kos. - Tunel za pripravo površine 3. Sušilnik z RX500 termoreaktorji dolžine L=5,0 m in višine H=2,4 m skupaj z nadzorno enoto 4. Deli lakirne enote: - Pršilna kabina - Manipulatorji RFV 2000 2 kos. - Centralna enota za mešanje prašnih barv - Krmilna omara - Aplikatorji za prašno barvo 6 kos. - PVV reciklažni set - Filtrirna enota - Filtrirna preša - Rezervoarji za centralno mešanje prašnih barv - Enota za gašenje požara - Krmiljenje lakirnice 5. RX500 termoreaktorska peč dolžine L=9,0 m in višine H=2,4 m skupaj z nadzorno enoto

Stanje: dober (rabljeno), Leto izdelave: 2012, I am selling an automatic pneumatic cross-cut saw KuangYung PX60 CFS 200B, year of manufacture 2012. Motor power: 7.5 kW Automatic infeed table: 5.10 m (throughfeed system) Iajdpfx Aoppwx Eslaot Outfeed table: 9.20 m 5 ejectors on the left outfeed table. Total length: 15.50 m Optimization with automatic defect detection and automatic cutting pattern programming. Available immediately. CE-certified. Documentation included.

Leto izdelave: 2006, obratovalne ure: 0 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM – PROTEIN-NITROGEN Raypa DNP-2000 Baujahr 2006, unbenutzt Eiweiß-Stickstoff-Destilliergerät nach dem Kjeldahl-Verfahren. Automatisches System zur Analyse von Protein-Stickstoff in Rohstoffproben oder verarbeiteten Materialien für die Lebensmittelindustrie. Spezifische Methoden verfügbar. Ergebnisse entsprechen den Vorschriften: EN/ISO, AOAC. STICKSTOFF-DESTILLIERGERÄT – DNP-2000 Merkmale • Zwanzig frei programmierbare Benutzerprogramme. • Zusätzlich verfügt das System über drei feste Programme: – Ammoniumsulfat-Test. – Systemvorheizung. – Probenspeisewäsche. Ijdpefiliwsfx Alajat Vorteile • Optionales Kit für automatische Titration. • Probenabsaugung. • 20 Benutzerprogramme. • Pumpenkalibrierung durch den Anwender. • Dampferzeuger mit Wasserstandskontrolle. • Borsäurepumpe. • Tür-offen-Sensor. Leistung • Messbereich: 0,1 bis 200 mg N. • Stickstoff-Rückgewinnung: >99,5%. • Reproduzierbarkeit: ± 1%. • Destillationszeit: 4 min/100 ml. • Kühlwasserverbrauch: 1,2 l/min. • Leistung: 2000 W (100%). Programmierbare Parameter und Werte • Verdünnungswasser: 0–240 ml. • NaOH-Lösung: 0–240 ml. • H₃BO₃-Lösung: 0–240 ml. • Reaktionszeit (Verzögerung): 0–30 min. • Destillationszeit: 0–30 min oder unbegrenzt. • Dampfdruckregelung: 30–100%. Sicherheit • Geschlossene Tür-Erkennung. • Erkennung des Verdauungsglases. • Übertemperatur-Thermostat. • Anwendung in der Lebensmittelindustrie sowie in der Önologie (Weinbau). • Lieferumfang: Bedienungsanleitung, Montagedichtungen und Steckdose • Für rumänische Firmen ist Ratenzahlung möglich. Preis: 4.000 € + MwSt. EXW Verladen FCA: Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. Wir sprechen Deutsch. Beszélünk magyarul. Nous parlons français. Vorbim romana.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Modula Lift ML50D Storage Lift The Modula systems are automated vertical storage systems based on the concept of vertical storage and saving floor space. They can store any type of material safely, cleanly, and efficiently while saving up to 90% of floor space. The Modula systems are the result of more than 30 years of experience by an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring when inserting trays • Dynamic allocation of tray locations in the system according to storage item heights • Machine frame made from galvanized steel profiles • Vertical drive with steel-reinforced Eagle timing belts • Extractor guiding system with 6 HDPE rollers per side • Management of trays with differentiated load capacities The storage lift has been regularly serviced by the manufacturer and is in very good condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing a storage area of 3.53 m² per tray. With 58 trays, the total storage area is 204.74 m². The load capacity per tray is 500 kg, which results in a total capacity of 29,000 kg for all 58 trays. Manufacturer: Modula Year of manufacture: 2013 Model: Modula Lift ML 50D Height: 6,700 mm Tray width: 4,100 mm Tray depth: 857 mm Tray height: 120 mm Net load capacity per tray: 500 kg Gross total load capacity: 70,000 kg Machine dimensions: Internal picking (W x D) 4,517 x 3,165 mm Machine dimensions: External picking (W x D) 4,517 x 4,058 mm Iaodpfxjx Ezxlo Alaet User interface: Console with 10.4” touchscreen technology (Copilot) Throughput: up to 120 trays/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 58 Can be shortened to 4,700 mm Disassembly costs over €6,000 already included Item location: 37308 Geisleden Product video Product video 2 For data sheet, see the documents tab. Financing through our partner bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Modula Lift ML50D Storage Lift The Modula systems are automatic vertical storage units based on the concept of vertical warehousing and space-saving solutions. They allow for secure, clean, and efficient storage of all material types, saving up to 90% of floor space. Modula storage lifts are the result of over 30 years of experience from an Italian company specializing in advanced technological products. • Minimal energy consumption • Automatic weight monitoring during tray insertion • Dynamic tray allocation within the unit according to stored item heights • Machine frame constructed from galvanized steel profiles • Vertical drive with steel core-reinforced Eagle timing belts • Extractor guide system with six HDPE rollers per side • Tray management with differentiated load capacities The storage lift has been regularly serviced by the manufacturer and is in excellent condition. Tray dimensions are 4100 mm wide and 860 mm deep, resulting in a storage surface of 3.53 m² per tray. With 60 trays, the total storage area amounts to 211.80 m². Each tray supports a load capacity of 500 kg, providing a total system capacity of 30,000 kg for all 60 trays. Manufacturer: Modula Year of manufacture: 2021 Model: Modula Lift ML 50D Height: 6700 mm Tray width: 4100 mm Tray depth: 857 mm Tray height: 120 mm Net load per tray: 500 kg Gross total load: 80,000 kg Machine dimensions (internal retrieval): 4517 x 3165 mm (W x D) Machine dimensions (external retrieval): 4517 x 4058 mm (W x D) Operator interface: Console with 10.4” touchscreen (Copilot) Iaedpex Ey Avefx Alajt Throughput: up to 120 trays/hour (depending on configuration) Height increments: 200 mm Storage pitch: 25 mm Number of trays: 60 Can be shortened to 4700 mm Disassembly costs of over €6,000 already included Item location: 37308 Geisleden Product video Product video 2 For technical data sheets, see the Documents tab. Financing through our partner bank is available. komplett-konzept.leasingo.de More new and used items available in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna širina: 3.642 mm, skupna dolžina: 3.334 mm, vhodna napetost: 400 V, dolžina podajanja os X: 2.900 mm, dolžina pomika po osi Y: 2.600 mm, delovna širina: 2.600 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 80 m/min, največja širina rezanja: 2.540 mm, največja višina reza: 20 mm, priključek za stisnjen zrak: 9 letvica, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate stacking area of 1,200 x 2,600 mm, the FlashCut 26B offers optimal conditions for efficient workflows. The maximum cutting height of 20 mm allows you to process a wide variety of materials—including multilayer stacks. Two independently operating tool heads ensure high speeds and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements at a travel speed of up to 80 m/min and acceleration of 1G. Intelligent material handling & vacuum technology A continuous conveyor belt transports the material steadily into the processing area. The vacuum table is divided into 300 x 300 mm segments, enabling targeted activation of individual zones. This provides precise material fixation while minimizing energy consumption. Two powerful frequency-controlled vacuum pumps (3–15 kW) automatically adjust their output to the actual demand. The result: secure material hold with energy-efficient operation. Precision through camera & projection technology For optimal material utilization, the system features two cameras with integrated light sources and dimmers to detect irregular material contours—such as with leather hides. Defects can be digitally marked and taken into account during subsequent processing steps. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, article numbers, sizes, or further markings can also be projected onto the cut parts—ideal for process reliability and traceability. Powerful CNC control & software The system is equipped with a modern CNC controller, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support ensures easy operation and remote maintenance. Iajdpfoymn R Nex Alajt The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest strategy enhances the system with a specially developed nesting logic for optimizing leather cutting. This takes into account quality zones, defect areas, as well as defined rotation and grouping rules to achieve the highest possible material yield. Versatile tooling The FlashCut 26B is supplied with a multi-tool head as standard. Included are, among others: - Drag knives - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating applications. Safety & reliability A safety monitoring system with light barriers and emergency stop switch ensures maximum operational safety. The machine is CE compliant and designed for continuous industrial operation.

Stanje: dober (rabljeno), Širina reza: 3700 mm. Z napravo za polaganje in odstranjevanje stekla. Sistem ločevanja: ogrevanje in nož. Delovna višina: 950 mm. Skupna dolžina naprave: 4080 mm. Širina mize: 4020 mm. Širina čez most: 4820 mm. Teža: cca 6,2 t. Stanje: dobro, rabljeno. Iaodpfx Aoxpnk Helaet

Leto izdelave: 2020, stanje: novo, The Sapphire is the optimal solution for the heavy industry sector when working with material thicknesses up to 200 mm. It enjoys widespread popularity among a variety of manufacturing operations – often running in three-shift patterns – as well as in all areas where maximum stability, efficiency, and process reliability are essential. Iedpfx Alef Ak N Rjaeat Thanks to its premium configuration, the system serves as a universal tool for the highest demands and is a valuable asset for process optimization. Now in use by more than 400 industrial companies worldwide, the Sapphire cutting system demonstrates its capabilities every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch interface - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for simplified positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - PFC 6 extraction unit incl. extraction pipes - Delivery, installation, and commissioning Main features • High dynamics and precision for automated 2D & 3D cutting of sheets, pipes, and profiles • Sheet processing for material thicknesses up to 200 mm • Comprehensive cutting database for optimal operator convenience • Designed to meet the most demanding conditions in continuous three-shift operations General technical data Drive type: Servo AC Available working widths: 2,000–7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeat accuracy: DIN-EN 28206 Working table height: 740–760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Stanje: novo, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology with the precision of waterjet cutting. The synergistic use of both technologies allows you to fully exploit all the benefits they offer. Thanks to its universal application options and extensive configuration possibilities, the Opal WaterJet Combo has proven itself in both large factories and small workshops. Key features • Innovative, patented use of waterjet and plasma technologies • Enables fully automatic cutting with both methods • Up to 10 times faster cutting speeds compared to conventional waterjet systems • Reduction of production costs by up to 70% Iaodpfx Alef Ak Ugeajt • Universal tool for cutting all types of materials • Option to use the ProX 3D cutting head • Flexible selection of preferred cutting technologies during the operation, tailored to each component • Choice of pure water or abrasive cutting General technical data Drives: Servo AC Available working widths: 1,000 – 6,000 mm Available working lengths: 1,000 – 12,000 mm Material thickness - Waterjet 2D: 0.5 – 250 mm - Waterjet 3D: 0.5 – 150 mm - Plasma: depends on plasma source Plasma cutting quality: DIN-EN ISO 9013 Positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Electrical components: DIN-EN 81346 Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Leto izdelave: 2008, stanje: rabljeno, Labelling Machine / Marking System SRD Stano/Alone-Line Features: * Used labelling machine with marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material transport * Professionally dismantled and packed Year of manufacture: 2008 Technical Data: Manufacturer: SRD Type: Stano/Alone-Line Unit: Valentin SPE 106/12 Internal Article Number: 2026012704 Iodpeyfgp Uofx Alajat Semi-automatic marking system for media (audio and video carriers) See operating manual, wiring diagram, and pneumatic diagram Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customised quotation or advise you on design and installation matters. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in various sectors, such as logistics, pharmaceutical industry, trades, and the electronics industry. Together, we will find ways to optimise your processes and material flow efficiently and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or containers.

Stanje: rabljeno, Leto izdelave: 2016, The PDFD line consists of two main components: the DFC 60 tenoning and profiling station (where the ends of the laths are machined) and the PHSL finger-jointing press, which joins elements into laths up to 6.6 m in length, with the ability to program up to eight intermediate cross-cuts, dividing the lath into sections of operator-defined length. Between these main machines, there are transport devices that also serve as a pre-tenoning station. The presented line configuration enables an output of approx. 8,500 – 10,500 linear meters per shift. The machines have undergone a complete overhaul. One-year warranty included. The microprocessor-controlled system allows flexible adjustment of working parameters to suit user requirements. This line is capable of processing both “calzing” type elements and components for manufacturing tabletops (joined along the grain). The use of an outfeed table with automatic feed of laths onto the infeed conveyor of the PHSL press allows the line to be operated by a single worker feeding elements. The outfeed table is equipped with a buffer screen, increasing efficiency and operational smoothness. The line operates in automatic mode with manual material feeding. The line’s components can be arranged in various (customer-agreed) configurations, ensuring the machine fits the user’s available workspace. Technical Specifications: - Infeed width for tenoning machine: 650 mm - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa Isdjc U Txkspfx Alasat - Compressed air demand: approx. 25 m³/h - Working capacity: up to 4 cycles/min (lath 6,600 mm) - Length of laminated element: 4,500 – 6,600 mm - Operating voltage: 3/N/PE 400 V 50 Hz - Control voltage: 24 V DC - Power requirement: max 100 kW Wooden laths are placed by the operator onto the carriage of the first tenoning machine. Loading the elements initiates the milling cycle. The first machine squares the ends of the batch and profiles the tenon shape. The batch is then transferred to the table of the second tenoning machine, where the other end is machined and glue is applied. Elements from the DFC-60 D tenoner are fed via a chain conveyor to the pre-tenoning assembly, where a set of rollers and a pressure device preliminarily clamp the finger-joint edges before entering the press. Pre-machined elements are then conveyed to the press table, where, after reaching the required length, they are cut. Using a pusher bar and pressure bar, they are moved to the pressing bed area, where the pressing process takes place. The glued and pressed, finished lath is pushed onto the press outfeed table. After moving the elements to the pressing bed, the process of loading new elements onto the press table is carried out in parallel with the described steps, maintaining continuous press operation and thus increasing gluing efficiency.

Stanje: rabljeno, Leto izdelave: 2000, Prodano za dijelove, nedostaje ADU kartica. Automatski sustav za testiranje tableta Isdjx Rz I Djpfx Alajat - Laboratorijska mjerna oprema - Alat za tablete Omogućuje testiranje: - Tvrdoće - Promjera - Debljine - Težine Precizna vaga Sartorius WZ64S Raspon vaganja: 10 do 50 g Jedinica: mg / 0,5 mg / 0,1 mg (podesivo) Debljina: Pogon: koračni motor Mjerna metoda: linearni potenciometar Jedinica: mm ili inč Tolerancija: +/- 0,1 mm Tvrdoća: Pogon: koračni motor Mjerenje: mjerni most (mjerna ćelija, lmz) Princip mjerenja: dinamometrijska vaga Jedinica: N, Kp ili Sc Promjer: Pogon: koračni motor Mjerna metoda: koračni motor Jedinica: mm ili inč Raspon: 3 – 18 mm / 3 – 30 mm (ručno) Tolerancija: +/- 0,1 mm Napon: 100 / 240 V, 50 Hz / 60 Hz UTS je univerzalni, potpuno automatizirani sustav za testiranje razvijen za industrijsku upotrebu. Ovaj uređaj je odobreni model iz serije sustava testiranja uspješno korištenih dugi niz godina. Razvijen je u bliskoj suradnji s farmaceutskom industrijom. UTS 4.1 može testirati okrugle, ovalne, četvrtaste i duguljaste tablete, kao i brojne specijalne oblike. Za nježne duguljaste tablete moguće je integrirati dokazani sustav centriranja (OZB). Svi dijelovi koji zahtijevaju čišćenje mogu se brzo i jednostavno ukloniti bez upotrebe alata. Sustav za testiranje moguće je proširiti raznim opcijama poput distributera i/ili sakupljača uzoraka s različitim brojem stajališta. UTS možete koristiti kao laboratorijski tester ili uređaj za online kontrolu spojen na prešu za tablete. Uzimanje uzoraka može se aktivirati izravno na proizvodnom stroju ili putem TTS11 softvera.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Iaedpfswya Syox Alajt Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: novo, Leto izdelave: 2025,