Sistem vodnega curka / plazemskega rezanja

Eckert Cutting Technology Opal WaterJet Combo

Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd. Rezno območje 90° Dujdpfx Ash Tnd Ajplet okroglo 260 mm ploščato 300x260 mm najmanjši premer 5 mm NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost Samodejna nastavitev vodila traku glede na širino materiala Priporočene opcije: poganjana krtača za ostružke, sinhronizirana s hitrostjo traku posebej postavljena nadzorna plošča 7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 26.920 h, IRB 6640-235/2.55 Year of manufacture: 2011 Duedoim Si Aopfx Aplet We are also happy to offer this robot fully refurbished! For further information, please do not hesitate to contact us!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Dsdpfju Egp Isx Apljut Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit Dedpfsxnlgcsx Apljut • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Nova naprava - razprodaja zaloge - Praznjenje je mehansko. Navedená cena je neto iz skladišča. Dedpfx Asw Sfdwsplsut

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Usable working area: 2000x3000mm, Z-axis: 50mm, positional repeatability across the entire area: ±0.05mm, X/Y/Z addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y system with linear motors, Z-axis with servomotor, laser safety class: class 1 with cover hood, base frame: robust welded steel structure, axis system: X/Y/Z axes of motion, drive: linear motor drive, contactless and low-wear, unloading system: extension 2000mm, conveyor: aluminum slat conveyor with servo motor drive, pressure roller: for material feed, laser source: 300W CO2 laser, sealed and maintenance-free, cooling: closed water circuit with water chiller for the laser, cutting head: 5-inch lens, cutting nozzle, cutting gas supply, extraction: extraction tray for small parts and dust, software: CAM control software ICARO, motorized brush width: 2000mm, SEI PC console: PC not included, to be provided by customer, extraction unit: 2x extraction blowers at 5.5kW each, scanner: manual barcode scanner, unwinding device: for material rolls with unwinding bar, unwinding system: connection available. The system was only set up and accepted, serial operation has not taken place. On-site inspection possible, documentation available. Dedpfx Apewbuzfelout

Stanje: rabljeno, Leto izdelave: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that secures panels and sheets using vacuum pressure. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is fitted with a set of valves that allow switching different table zones on or off, focusing the vacuum in a specific area and optimizing the clamping of small components. Capable of interpolated milling and drilling of composite panels, as well as aluminum, steel, or titanium sheets, and aluminum profiles. Tekna supplies user-friendly software that can be operated by both experienced CNC programmers and users with less experience. TKE 783 is a machining center with 3 controlled axes, designed for interpolated drilling and milling of composite panels, aluminum, steel, or titanium sheets, and aluminum profiles. Technical specification: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Table dimensions: 2010 x 6300 mm Weight: 4842 kg Travel speeds: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Dusdpov D A Imefx Aplst Other: Used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to answer them.

Stanje: rabljeno, Four in a Row – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. Dedpfjvdqhbox Apleut PROJECT PLANNING Our sales team will be happy to prepare a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The stated price refers to the unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, located in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for commercial, industrial, and trade applications. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.

Stanje: dober (rabljeno), Leto izdelave: 2006, A well-maintained folding machine from 2006 is offered for sale here, featuring 6 buckle plates and 2 knife units. Available from 12/24. Duedpfou Ah Dbjx Aplot

Stanje: rabljeno, approx. 15 t available Dedpodc A Sijfx Apleut