Stromab Chopsaw nakup rabljenega (74)

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MR006589, Visokokakovostni, hitri čelilni žagalni stroj z avtomatskim potisnim sistemom in programsko opremo za optimizacijo. Stroj je opremljen s funkcijo zaznavanja napak v materialu z uporabo krednih črt in vključuje naslednje opcije: - Pnevmatski pritisni cilinder na desni strani žage - Pnevmatski pritisni cilinder na levi strani žage - Paket 'OPTI' z zaznavanjem dolžine materiala in dodatnimi optimizacijskimi kriteriji - Paket 'OPTI PLUS' s fotocelico za prepoznavanje napak v materialu - Stroj z izhodno mizo (na meter) - Tiskalnik etiket - MO9416XLTD Tehnične specifikacije: - Kot reza: 90 ° Gsdpfxey I N Aks Abrekc - Največja dolžina reza: 360 mm - Največja višina reza: 135 mm - Največja potisna dolžina: 6000 mm - Uvoz seznama rezov: Da - Senzor krednih črt: Da - Največji premer žaginega lista: 500 mm - Moč motorja: 10 KM - Serijska številka: 10561

Stanje: rabljeno, USED STROMAB RADIAL ARM SAW Gkedpfowr T Hbox Abrec

Stanje: dober (rabljeno), Leto izdelave: 2001, Stromab PS50 / O Premer žaginega lista: 500 mm Gkodpfx Abszzlrxorjc Višina reza: 145 mm Motor: 5,5 kW (7,5 KM) Žaga se lahko nagiba.

Stanje: dober (rabljeno), Leto izdelave: 2003, premer žaginega lista: 450 mm, Nice under-table mitre saw with two-hand operation and foot switch Saw blade diameter: 450 mm Godjwx R Ivopfx Abrskc Max. cutting height: 16 cm With 2 roller conveyors

Stanje: rabljeno, Technical data: Gjdsri Si Djpfx Abrskc Max saw blade diameter: 600 mm Min saw blade diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade extension width: 500 mm 2 pneumatic clamps Extraction nozzle diameter: 155 mm Worktable dimensions: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Stanje: dober (rabljeno), Leto izdelave: 2005, OPTIMIZATOR REZANJA STROMAB TR350 MATRIX 4-7000 Set 8 nakladalnih verig. Dolžina posamezne verige: 1.500 mm Programirljiv potiskalec, hod 7.000 mm 4 kriteriji za optimizacijo Možnost odstranjevanja grč, označevanje s kredo Rezkalna glava. Premer diska: 350 mm. 4 KM Rezalni prerez: 150 mm x 80 mm, ..., 210 mm x 30 mm Gksdjzcy Ncspfx Abroc Razkladalnik/klasifikator z 2 hitrima pnevmatskima izmetnikoma. Motorizirani transportni trak Leto 2005 CE

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz Gkedpfov A Htksx Abrsc - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit Gsdpfx Abev A Htdjrokc - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm Gkedov A Hr Tspfx Abrjc - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8066 Tehnični podatki: - največji premer diska: 400 mm - premer luknje diska: 30 mm - zaščitni pokrov za disk - največja višina reza: 110 mm - največja širina reza: 700 mm - možnost rezanja pod kotom v navpični ravnini: +90°/-90° (premik roke ali premik diska) - možnost vrtenja roke: levo/desno - motor: 3 kW - dimenzije mize: 1180 x 600 mm - premer priključka za odsesavanje: 60 mm, 120 mm - dimenzije (d/š/v): 1340 x 1180 x 1600 mm - teža: 200 kg Prednosti: - izdelano v Italiji - brez barvanja - zelo dobro stanje - rabljena žaga Neto cena: 8900 PLN Neto cena: 2070 EUR, odvisno od menjalnega tečaja 4,30 EUR Gkedpfezrwfljx Abrjc (Cene se lahko spreminjajo glede na večja nihanja menjalnega tečaja)

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Kotna žaga – STROMAB, model CT 800, leto izdelave 2008. Gkjdpfx Abjkzhffjrec

Stanje: novo, Leto izdelave: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined by 8° Technical features of the cutting unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400 V / 50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE ON LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful feed motor for package weights up to 80 kg Maximum feed system speed: 90 m/min Pneumatic pusher lift at end of cutting cycle and overhead return. Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycles (patterns) and input them directly on the controller Transfer cutting lists created on a PC via USB or Ethernet port Operating software: Manual input of loading board length Partial optimization without reading finished lengths Cutting cycle with 3 optimization options (maximum length, sequence, board sequence) Up to 1,000 cutting lists with 11 dimensions each, or a single list with 10,000 consecutive dimensions Gkedpfx Aehw Ng Iobrec "OPTI" package: automatic board length detection and full optimization. Piece length detection by photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: complete optimization including knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent crayons/pencils (Note – Only orderable in combination with ZA250) Pneumatic side clamping device Software for creating lists on PC in XML format

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kW Automatic miter saw CT-600-6000 - Hydraulic under-table circular saw unit - Motor power: 7.5 kW - Saw blade diameter (Z=48x5): 600 mm - Saw blade bore diameter: 30 mm - Tilting worktable: Yes - Automatic table rotation: -70° 0° +70° - Table rotation speed to/from 0° / 70°: 3 s - Positioning accuracy: +/- 0.2° - Pneumatic workpiece hold-down clamps: 2 units - Pneumatic side aligners: 2 units - Safety guard over crosscut unit: Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness: 10 mm Connection specifications - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Compressed air requirement at 8 bar per cycle: approx. 8 Nl - Extraction port Ø100 mm: 2 units - Extraction port Ø160 mm: 1 unit - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Driven by brushless servo motor - Feed system with precision rack and pinion and measurement via servo motor - Pneumatically liftable pusher for bypassing the workpiece in the next cycle - Positioning tolerance: +/- 0.4 mm Control system: - Beckhoff industrial PC control with Windows CE operating system with touchscreen Gkjdpfevz Eq Sex Abroc - Data entry via keyboard, USB, or network - 5 optimization criteria: a) Maximum length b) Minimum scrap c) Part priority d) Volume e) Value - Processing of individual part lists or consolidation of orders - Graphical display of parts in progress - Batch processing capability - 70 cutting lists with 21 sizes per list or a single cutting list with 400 sizes - Safety device - CE compliant - Protective enclosure included

Stanje: novo, Leto izdelave: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders (vertical): 4 Number of manual hydraulic cylinders (horizontal): 2 Pressing force: 1500 kg Gksdpfx Ajiwfhwobroc Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vetrna stiskalnica Stromab ST 2500 Največja delovna dolžina: 2500 mm Gedpoy Spg Dofx Abrjkc Največja delovna višina: 1200 mm 6 pritisnih cilindrov za material 3 čelni cilindri

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vetrna stiskalnica Stromab ST 2500 Največja delovna dolžina: 2500 mm Največja delovna višina: 1200 mm 6 pritisnih cilindrov za material 3 čelni cilindri Gedpfx Aey Spfyebrjkc

Stanje: rabljeno, Motor z močjo 3,0 kW, višina reza 80 mm, vrtljiv, brez vpenjalne mize. Lokacija skladišča: Nattheim. Gedpszkl U Sjfx Abrskc

Stanje: rabljeno, Leto izdelave: 1999, največja višina reza: 210 mm, največja širina rezanja: 460 mm, PNEUMATIC MITRE SAW, TILTABLE: Brand: STROMAB Model: PS 600/P Serial No.: 990460 Year: 1999 MACHINING CAPACITIES: - Maximum timber section: 210 x 460 mm (thickness x width) - Tilting arm (rotation): -45° to +40° - Cutting capacity at 45° angle: 210 x 325 mm max FEATURES: - CE marking - Pneumatic feed to the front arm - Lockable isolator, emergency stop buttons - Main supply: 380V, 3-phase, 50 Hz - Saw motor power: 7.5 kW (10 HP) IN 16.5A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm, Bore: Ø 30 mm, Thickness: 4.2 mm - Table height (working height): 880 mm - Main table in wood: 1100 x 710 mm, with 2 pneumatic clamps - Pneumatic supply: 6 bar, Estimated consumption: 28 nl - Extraction port: Ø 150 mm Gkedpsrx Tatjfx Abroc Recommended airflow: 1350 m3/h, 20m/2 Overall dimensions: 1700 x 1500 x h.1900 mm Weight: 630 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Machine offered as is, with no specific overhaul works included.

Stanje: rabljeno, Leto izdelave: 2009, Rabljen stroj Letnik izdelave 2009 Oprema in tehnični podatki: Profesionalna krojna, potegna in žaga za poševne reze Moč motorja: 1,8 kW Priključna napetost: 230 V Število vrtljajev žaginega lista: 4.200 vrt/min Premer žaginega lista: 255 mm Premer vrtljive mize: 328 mm Maksimalna zmogljivost reza: 80 × 305 mm Nastavitev poševnega reza: do 45° v levo in desno ter do 60° v desno Gkodezy D Agspfx Abrsc Nagib žagine glave: od -45° do +45° Nastavitve v korakih: 0° / 15° / 22,5° / 31,6° / 45° v levo in desno ter 60° v desno Zmogljivost reza pri 45° nagibu v levo: 42 × 305 mm Zmogljivost reza pri 45° nagibu v desno: 35 × 305 mm Zmogljivost reza pri 45° poševnem rezu v levo: 80 × 204 mm Zmogljivost reza pri 60° poševnem rezu v desno: 80 × 147 mm Kombinirana zmogljivost reza v levo: 42 × 204 mm Kombinirana zmogljivost reza v desno: 35 × 147 mm Dimenzije (D × Š × V): približno 1.200 × 700 × 450 mm Teža: približno 24,2 kg Osnovna plošča in vrtljiva miza iz tlačne litine iz aluminija Funkcija vlečenja za široke obdelovance Laserska projekcija za prikaz položaja reza Podaljšljivi podstavki za obdelovance na obeh straneh Zložljivi omejevalniki za ponavljajoče se rezanje dolžine Nastavljivi, visoki omejevalniki iz aluminija Vijak za pritrditev obdelovanca Nastavljiva omejitev globine reza Fina nastavitev kota Zaščita žaginega lista Posoda za strugnine Enostavna menjava žaginega lista Primerno za rezanje dekorativnih profilov za strop in okrasnih profilov

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW Gkedpfjvz Hz Eox Abrsc - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Na voljo je nihajna žaga Stromab z vrtljivo žaginim agregatom in valjčnimi progami. Moč motorja: 7,5 kW, premer žaginega lista: 600 mm, odprtina žaginega lista: 20 mm, največja višina reza: 210 mm, največja dolžina reza: 460 mm, premer odsesovalnega priključka: 150 mm, dolžina valjčne steze levo/desno: 2500 mm/2500 mm, širina valjčne steze: 500 mm, teža: cca 600 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gjdsyb Sclepfx Abrokc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pnevmatska montažna stiskalnica Stromab STA 2500 Delovna dolžina: 2500 mm Delovna širina: 1200 mm Sila stiskanja pri 8 bar: 2600 kg 2x bočni pritisk Gjdpfxjzhv Tyj Abrokc Pnevmatsko upravljanje CE certifikat

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, največja višina reza: 150 mm, največja širina rezanja: 500 mm, premer žaginega lista: 500 mm, izvrtina žagine plošče: 30 mm, - italijanska proizvodnja TEHNIČNI PARAMETRI: - moč motorja: 5,5 kW - maksimalna višina reza: 150 mm - maksimalna širina reza: 500 mm - hitrost vrtenja žage: 2800 obr/min - ročni pomik žage - dve zaponki - dimenzije dovajalne mize (d/š): 3000 x 540 mm - dimenzije oddajalne mize (d/š): 3000 x 540 mm - premer vretena: 30 mm - premer odprtine za odsesavanje: 100 mm Gkedpsym Ak Rsfx Abrec - dimenzije stroja (d/š/v): 630 x 160 x 190 cm - transportne dimenzije (d/š/v): 400 x 150 x 190 cm - teža ~350 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, I am selling an OMGA T521 automatic pneumatic crosscut saw, year of manufacture 2007. Automatic infeed table 5.10 m (pusher system) Outfeed table 1.50 m Total length: 8.00 m Optimization with automatic cutting pattern programming. Available immediately. Gsdpfx Aovxu Rpebrjkc CE compliance. Documentation included.

Stanje: novo, Leto izdelave: 2022, Nova stroj Letnik proizvodnje 2022 • Hidravlične preše za lepljenje lepljenega lesa, mizarskih plošč • Majhna potrebna površina in sprednje nalaganje • Podvozje na kolesih, od tega dve vodljivi Gedpfx Askwhb Hsbrekc • Višinsko nastavljivi hidravlični cilindri z ročnim nastavljanjem, praktično in funkcionalno • Vertikalno pomični stebri s sistemom za okvirno stiskanje Tehnični podatki: Delovne površine: 1 Uporabne mere: 2500 x 1800 mm Število vertikalnih hidravličnih cilindrov z ročnim nastavljanjem: 3 Število horizontalnih ročnih hidravličnih cilindrov: 2 Hod hidravličnih cilindrov z ročnim nastavljanjem: 60 mm Pritisk hidravličnih cilindrov z ročnim nastavljanjem: 1500 kg Dimenzije postavitve cca 3200 x 800 x 2200 mm Lokacija: Flörsheim Razpoložljivost: takoj