Stiskalnica za lepljenje

Stromab STH/ORM

Stanje: novo, Leto izdelave: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders (vertical): 4 Number of manual hydraulic cylinders (horizontal): 2 Pressing force: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm Lredpfxeiwfhws Abbog

Stanje: novo, Leto izdelave: 2025, Material width: 100 mm Material thickness: 15 mm Number of straightening rollers: 9 Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Space requirements: approx. 710 x 920 x 1360 mm Equipment: - 5 powered bottom rollers - 4 adjustable top rollers Lsdpsurni Uefx Abberg - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Ljdpfxofbr S Rs Abbsrg Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: rabljeno, Working width 4000 mm Working height 2600 mm Number of press cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000 ----- CE version Robust frame welded construction made of thick-walled special hollow profiles. Sliding carriage and pressure beam with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical press cylinders on special pressure beam with single-hand rapid adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriage with central locking, fixing in 50 mm hole grid. Upper horizontal press cylinder infinitely height-adjustable and equipped with weight compensation. Ljdpou Uvalofx Abbjrg Lower horizontal press cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 vertical press cylinders, d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-hand rapid adjustment; 2 horizontal press cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg vertical press pressure, with 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with press cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Article ,00 pcs Individual pressure control for central pressure beam, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Cross-pressing device complete with press cylinder, double-acting, weight compensation, pressure hose, and shut-off valve; weight compensation at the lower horizontal cylinder omitted Article ,00 pcs Individual pressure control for cross-pressing device, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on the 3rd vertical cylinder Article ,00 pcs Shut-off valve on the upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles (height requirement increases by 100 mm) Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for the vertical pressure beams and 3 attachable, laterally guided articulated pressure plates Article ,00 pcs Double articulated pressure plate for special-shaped windows (triangle) ----- Total price for the above configuration ex works: On request! -----

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Lredpfxjx Hbrne Abbsg Features and technical data: - Ideal for demanding craftsmen and joiners - The extra-long one-piece surfacing tables allow for easy planing of workpieces - Worktables are made of grey cast iron, making them resistant and permanently flat; parallel-opening surfacing tables with tension spring support ensure quick and convenient changeover - Thanks to the fixed mounted extraction hood, there is no need to reconnect the extraction hose when switching operations; this saves valuable working time - Helical-toothed steel infeed roller ensures constant and uniform wood feed - Rubber-coated outfeed roller at the thicknessing exit ensures even wood outfeed - Material feed with four speeds - Thicknessing table adjustment via handwheel with integrated planing height indicator - DIGITAL version: with electric thicknessing table adjustment and digital display - Start and stop switch positioned for operator convenience - Powerful industrial motor - The high machine weight guarantees maximum precision and smooth operation - Preparation for slot mortising unit - Quality Made in Italy - With spiral cutterhead - With fold-down cutterhead guard - Total table length: 2250 mm - Max. cutting depth: 5 mm - Working width: 520 mm - Thicknessing height: 3 - 240 mm - Number of cutter knives: 66 pcs - Cutterhead speed: 5000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2250 x 1440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Stanje: novo, Holzkraft minimax t 45c Spindle Moulder (5502044) Cost-effective, featuring a fixed spindle and cast iron worktable. - Robust steel and cast iron construction - With fixed milling spindle - 3 spindle speeds from 3,500 to 10,000 rpm - Milling spindle with forward and reverse rotation - Large cast iron milling unit, directly mounted to the table - Equipped with extraction hood beneath the worktable for improved dust collection - Solid and precise cast iron worktable - Fast and hassle-free speed change - Powerful 5.0 kW motor - Curved guard hood supplied as standard - Quality Made in Italy Equipment Details Cast Iron Milling Unit - Directly mounted to the milling table - Spindle mounted high with precision ball bearings for minimal bearing load and maximum service life - 3 milling speeds: 3,500 to 10,000 rpm Lrodekyt Ulopfx Abbeg Powerful Motors - Equipped with a high-performance three-phase motor Milling Guard The standard milling guard comes equipped for maximum safety with adjustable height guide rail and protective shield. Fencing - Precision fence with quick adjustment and fine adjustment with scale on the fence jaws - Integrated extraction port for clear visibility Table Opening - Large table opening allows the use of larger panel raising cutters and tenoning and slotting tools above and below the table Curved Guard Hood - Supplied as standard Reversible Fence Jaws - Versatile, integrable fence for bridging the tool gap - Allows safe operation even with narrow workpieces Accessories HOLZKRAFT Safety System Fence Jaws, adjustable - Optimum protection for any spindle moulder, individually adjustable for each task - Universal base elements for mounting AIGNER safety and work devices - Quick adjustment by simultaneous clamping of all individually movable rods - Made of high-quality aluminium - Universally suitable for all HOLZKRAFT spindle moulders - 500 mm: Art. No.: 5851000 - 650 mm: Art. No.: 5851650 TECHNICAL DATA Dimensions and Weights Weight (net) approx.: 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Worktable Worktable length: 1,000 mm Worktable width: 575 mm Table height: 900 mm Installation Information Space requirement length: 1,945 mm Space requirement width/depth: 920 mm Space requirement explanation: The dimensions include maximum travel or usable lengths. Machine body length: 1,000 mm Machine body width/depth: 575 mm Operating area length: 1,600 mm Operating area width/depth: 1,600 mm Operating area explanation: Please add stated dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical Data Connection voltage: 400 V Power supply frequency: 50 Hz Motor drive power: 5.0 kW Spindle Usable spindle length: 100 mm Max spindle projection above table: 130 mm Spindle speed(s): 3,500/7,000/10,000 rpm Spindle shaft diameter: 30 mm Maximum Milling Tool Diameter Max tool diameter, retractable: 180 mm Max tool diameter for profile milling: 210 mm INCLUDED IN DELIVERY - Curved guard hood - Aluminium fence jaws Holzkraft specialist dealer – accessories available on request!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KK052469, Connected load 380V 4kW Table size 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for feed unit Safety guards for hand routers Spindle diameter 30 mm Lrsdpfjiinm Hox Abbeg Aigner fence Extraction connection 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED Lrjdpfewry I Eex Abbog - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Lrodpfjw Iq Ugox Abbog Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: delavnici obnovljeno (rabljeno), reinforced cast iron table, tiltable balanced cast iron flywheels Lrodpfxev Dg A Uj Abbog precise upper & lower blade guides Table dimensions approx. 680 x 580 mm Cast iron flywheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V