Prenos 90° nakup rabljenega (11.489)

Stanje: novo, Included in delivery: 01x Platform beam, new Manufacturer: SSI Schäfer Design: Corner connection / 90° Suitable for CS Sigma profiles With a profile height of 300 mm Type of fastening: Internal bolting Nledpfx Ahomv Dyzo Uob Material finish: Sendzimir galvanized Technical data for the platform beam: Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing (outer): approx. 250 mm Hole spacing (inner): approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Stanje: dober (rabljeno), Technical data for pallet rack beam: Rack system: Dexion Type: P 90 Scope of delivery includes: 01x pallet rack beam, used Material color: Sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089 | 2 Connector: 5 HK Clear span: 1,445 mm 02x locking pins, used Design: Sendzimir galvanized For securing the longitudinal beams Your points of contact at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Njdowucmpopfx Ah Uelb General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Technical Data for the Pallet Rack Beam: Racking system: Dexion Type: P 90 Scope of delivery includes: 01x Pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 89 x 50 mm Nlsdewuf E Iopfx Ah Ujb Beam type: SLO 089|2 Connector: 5 hooks Clear span: 1,140 mm 02x Safety pin, used Version: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, this will incur additional costs, which can be provided upon request depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Tehnične podatke o prečki za paletni regal: Regalni sistem: Dexion (Hovik) Nljdpfx Aew R Shash Ujb Tip: P 90 V obsegu dobave je: 01x Prečka za paletni regal, rabljena Barva materiala: bela I-profil: 100 x 50 mm Agrafa: 5 HK Svetla širina: 950 mm 02x Varnostni zatič, rabljen Izvedba: sendzimir pocinkan Za varovanje prečnih nosilcev Vaši kontaktni partnerji pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Če želite prevoz ali pošiljanje tega izdelka, to povzroča dodatne stroške, ki jih lahko pri nas preverite glede na kraj dostave oziroma obseg dobave.

Stanje: dober (rabljeno), Technical data for the pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery includes: 01x pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 102 x 50 mm Beam type: SLO 102|2 Connector: 5 HK Clear width: 1,450 mm Nedpfxswub Eds Ah Uelb 02x locking pin, used Version: Sendzimir galvanized For securing the longitudinal beams Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This item is only offered for collection. If transport or shipping is required, this will involve additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Stanje: dober (rabljeno), Tehnični podatki za prečko paletnega regala: Regalni sistem: Dexion (Hovik) Tip: P 90 V obsegu dobave je: 01x prečka paletnega regala, rabljena Barva materiala: bela Profil škatle: 120 x 50 mm Zaponka: 5 HK Svetla širina: 2.700 mm 02x varnostni zatič, rabljen Izvedba: sendzimir pocinkano Za zavarovanje vzdolžnih nosilcev Vaši kontaktni podatki pri nas: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Nljdpfsw R A Iwex Ah Uob Splošne informacije o artiklu: Ta artikel je na voljo le za osebni prevzem. Dostava oziroma pošiljanje tega artikla je povezano z dodatnimi stroški, ki jih je mogoče posebej povprašati glede na kraj dostave oziroma obseg dobave.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Njdod A Sm Topfx Ah Uslb We are offering here a used pallet rack beam from the manufacturer Nedcon for sale. Technical data of the pallet rack beam: Racking system: Nedcon Type: NS Currently available: approx. 5,000 pieces Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 2008 Light Red Orange Box profile: 90 x 40 mm Hook type: 4 hooks Clear span: 1,900 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 02x Locking pins, used Version: fully galvanized For securing the beams against unintentional lifting Overview of our services: (Prices on request) Assembly and installation Please note our general assembly terms and conditions Racking inspection Inspection according to DIN EN 15635, carried out according to BGR 234 requirements Visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature Nlsdpfxofh Tmms Ah Uob - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Nlsdpfx Ahsd E Ixzo Ueb Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Identifikacija laserske serije YLP: Ytterbium Laser Pulsed. Označuje pulzni nanosekundni vlakenski laser, ki deluje v bližnjem infrardečem spektru (običajno valovna dolžina 1064 nm). HP: High Power (Visoka moč). Označuje podserijo za težjo industrijsko uporabo, namenjeno hitrejši obdelavi in višjim stopnjam ablacije v primerjavi s standardnimi, nizko-energijskimi namiznimi moduli za označevanje. 1: Označuje standard kakovosti optičnega žarka (M²) ali generacijo serije (ciljno razmerje M² ≤ 2,0 za čiste, ostre žariščne točke). 30x240: Nastavitev širine pulza / trajanja. Nanaša se na nastavljivo ali določeno dolžino pulza v nanosekundah, kar omogoča optimalno ravnovesje med hitrim odstranjevanjem materiala in minimalno toplotno prizadeto cono. 200-200: Opredeljuje moč. - 200 W povprečne izhodne moči: Zmogljiv za neprekinjeno pulzno delovanje pri moči 200 W. - 200 kHz frekvenca ponavljanja pulza (PRR): Največja frekvenca laserskih pulzov, ki določa, kako hitro laser gravira ali čisti površine. Električne zahteve (90-240 VAC) Vhodna moč: Vgrajen univerzalni napajalnik z avtomatsko prilagoditvijo napetosti. Naprava je namenjena neposredni priključitvi na standardne električne omrežne priključke po vsem svetu z napetostjo od 90V do 240V AC (enosmerna faza, 50/60 Hz), brez potrebe po težkih trofaznih industrijskih transformatorjih. Glavne aplikacije Zaradi visoke izhodne moči 200 W in visoke frekvence delovanja je ta model najpogosteje integriran v CNC obdelovalne stroje ali robotske celice za: - Visokohitrostno lasersko čiščenje / ablacijo: Odstranjevanje rje, barve, oksidov in premazov s kovin, brez poškodbe osnovnega materiala. Nljdpfx Ahoy Udyqe Ueb - Globoko lasersko graviranje in označevanje: Precizno graviranje na trde kovine, keramiko in visoko odsevne materiale (npr. aluminij ali baker). - Zarezovanje silicija / solarnih celic: Visokopretočno rezanje ali odstranjevanje slojev v industrijski proizvodnji. Popolnoma nov, nikoli uporabljen. Oglejte si tudi ostale naše ponudbe.

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, Postelja stružnice Intorex TR90 Nedpfxjy Uggts Ah Uelb

Stanje: rabljeno, Leto izdelave: 2012, 90 running metres Ramada pallet racking Used equipment, very good condition, see photos Height: 4.6 m Depth: 110 cm Beam length: 2.7 m Load capacity per bay: 3,000 kg Frames: blue Beams: orange Year of manufacture: 2012 Negotiable price: €8,150 net ex stock Scope of delivery: + 33 pcs. pre-assembled frames, depth 110 cm, height 4.6 m + 192 pcs. beams, used, length 2.7 m, 3,000 kg load capacity per bay + 384 pcs. locking pins + 132 pcs. concrete anchors Njdpfx Astql H Reh Ujlb + Load capacity signs Goods in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available on request. We always have over 5,000 running metres of pallet racking in stock from various manufacturers. (Subject to change and error in technical data, details and prices, as well as prior sale! Please refer to our terms and conditions. All prices excl. VAT ex stock.)

Stanje: novo, prevoženi kilometri: 500 km, moč: 382 kW (519,37 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, MAN TGS 33.520 BL 6x4 CH chassis cab, new vehicle with day registration, 33-ton version, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, stationary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer’s warranty valid until 16.12.2026 MAN ATS warranty valid until 16.12.2027 Commercial tonnage 33 tonnes Gross vehicle weight rating 26,000 kg 28,000 kg permissible total vertical load (Technical Plus) Njdpfx Ajx I T Uksh Uolb Mileage approx. 1,335 delivery kilometers Medium-high design Cab type: NN short cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive configuration Wheelbase 3,600 mm, rear overhang 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD automated gearbox PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, approx. 3:30 position High-performance engine brake MAN EVBec, multi-stage MAN EfficientRoll gearbox function Gearbox function rocking mode MAN Idle Speed Driving gearbox function Transmission for increased push proportion in driving mode MAN TipMatic Performance and Efficiency driving programs, up to 70,000 kg MAN TipMatic Offroad driving program, up to 70,000 kg MAN TipMatic Manoeuvre drive program, shunting mode MAN EasyStart hill-start assist MAN ComfortSteering system Full brake assist EBA emergency brake assist LDW lane departure warning MAN AttentionGuard driver alert system ABS Offroad with additional off-road logic EBS, ASR, ESP Front axle leaf-sprung, rear axles air-suspended Front axle capacity 9,000 kg, rear axle capacity 13,000 kg Front axle spring load capacity 9,500 kg Stabilizers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling: ROCKINGER type 500 G 6B with permissible trailer load up to 24,000 kg (Technical Plus) 44,000 kg permissible gross train weight (Technical Plus) Climatronic (automatic climate control) 4 kW additional water heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 rotating beacons on cab roof LED daytime running lights LED rear and side marker lights 2 LED outline marker lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel, 4 functions, can be operated from outside when door is open Air-suspended and heated driver’s comfort seat Comfort seat covers Smartphone integration MAN SoundSystem Advanced MAN Mediasystem Advanced navigation, 7 inch New vehicle with day registration as of 16.12.2025 and MAN manufacturer’s warranty Price NET, plus 19% VAT. Attractive financing options available on request. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2571

Stanje: novo, Širina pločevine: 1050 mm Debelina pločevine: 3,3 mm Upogibna zmogljivost: 3,0 mm Premer valjev: 90 mm Najmanjši premer: 130 mm Skupna priključna moč: 1,1 kW Teža stroja: ca. 570 kg Prostorske zahteve: ca. 2100 x 800 x 1130 mm Oprema: - Asimetrični 3-valjni okrogli stroj z motornim pogonom - Zgornji valj izklopljiv - Naprava za konično upogibanje - Glavni motor z zavoro Posebna oprema: - Motorno nastavljanje zadnjega valja - Digitalni prikaz nastavitve zadnjega valja Nljdpsyv Nfbefx Ah Ueb - Indukcijsko kaljeni valji

Stanje: rabljeno, Tehnične podrobnosti: Tlak: 90 t Nljdpfx Aju Nfg Hoh Ujb Izvenje: 320 mm Število hodov: 90 hodov/min Vgradna višina: miza/beran zgoraj: cca 380 mm Nastavitev berana: max. 65 mm Površina berana: 600x55 mm Vpenjalna plošča na mizi: 800x640x80 mm Prehod: 260x160 mm Nastavitev hoda: 60 mm fiksno Skupna priključna moč: 5,5 kW Teža stroja pribl.: 4500 kg Potrebni prostor pribl.: D:1,8xŠ:0,82xV:2,42 m - Posamezni/kontinuirani hod - Redni pregledi izvedeni, prenovljen 2010 - Trenutno brez krmilne omare, brez krmiljenja, brez tlačne posode *

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, moč: 2 kW (2,72 KM), premer žaginega lista: 350 mm, Radiálna žaga Graule Ta stroj lahko reže le pod kotom 90°! Dolžina reza: 430 mm Nljdsy Dgdkjpfx Ah Usb Globina reza: 135 mm Premer žaginega lista: 350 mm Premer priključka za odsesavanje: 100 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net Nljdpfxjd N Dnho Ah Uob The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 29156, 27781, Haspel Teža tuljave / Nosilnost: 2 x 4,5 t Maks. širina traku: 520 mm Zunanji premer tuljave: 1800 mm Razpon razširitve: 460–525 mm Ravnalna enota Širina traku: 30–500 mm Število ravnalnih valjev: 11 kos Premer ravnalnih valjev: 90 mm Število izvlečnih valjev: 2 kos Premer izvlečnih valjev: 90 mm Število dovodnih valjev: 2 kos Premer dovodnih valjev: 90 mm Debelina traku: 0,8–8,0 mm Hitrost podajanja: 3–30 m/min Standardna oprema Nsdsvg Iqxjpfx Ah Uolb Haspel je iz leta 2015. Ravnalni stroj dobavljen leta 2009, predelan leta 2016 za prilagoditev novi haspel. Dodatna oprema Vodilna pomoč, mostiček za zanko.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 14.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3294, vrsta vhodnega toka: trifazni, moč: 90 kW (122,37 KM), vhodna napetost: 400 V, Prodajamo linijo za pelete proizvajalca Nova pellet, letnik 2019 in prva uporaba v letu 2020. - Stiskalnica za pelete N-MIDI 90 kW, 14.000 ur (zelo dobro in redno vzdrževana, 2026 novi valji in matrica) – leto 2019 - Transportni vertikalni dvigalo, višina približno 10 m – leto 2019 - Hladilni stolp N-CO700 – leto 2019 - Krmilna omara – NOVA, NERABLJENA Za doplačilo prodamo tudi robustni kladivni mlin Miller M16 (električni motor 37 kW) – NOV, NERABLJEN – 25.000 € neto. Prodajamo samo zgoraj naštete predmete (brez ciklona, filtrov itd.)! Nledpfx Ajwahhcjh Ujb Linija je v zelo dobrem stanju in je bila redno strokovno vzdrževana. Za dodatne informacije pišite ali pokličite na naše kontakte.

Stanje: dober (rabljeno), Leto izdelave: 2011, Robot, Stäubli TX90 Lbmn, with CS8C control unit, operator panel, and accessories – used –: Price ex works: €14,250 (net) Manufacturer: Stäubli Model: TX90 Year of manufacture: 2011 Machine no.: F11/5G1VB1/A/01 Weight: 113 kg Payload: 5 kg Nlsdpeununpofx Ah Ueb Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Stanje: rabljeno, moč: 160 kW (217,54 KM), Rezkalni mlin DREHER 26/90 / Rezkalni mlini Stroj je opremljen z brušenimi noži in je primeren kot mlin za izsekane mreže in folijske trakove. Tehnični podatki stroja: Nledpfxoy Tig Hj Ah Usb Pogon: 7,5 kW Noži rotorja: 5x3 Noži statorja: 2x2 Premer rotorja: 260 mm Širina rotorja: 900 mm Z valjčnim podajalnikom

Stanje: dober (rabljeno), Leto izdelave: 2013, Hazardous material container, REI 90 / F 90 fire protection storage unit type WFP, cantilever racks, internal lighting, drive-on ramp, leakage sensor – used –: Price ex-site: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Type: REI 90 / F 90 Fire Protection Storage WFP-X 14 Surface room system External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions                                 Inside       Outside (without attachments) Width (mm):                 2,560       2,952 Depth (mm):                 5,500       5,938 Height (mm):                2,500       2,924 Sump Volume Sump volume steel tray: 1,560 litres Door arrangement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire safety system: 1 pc Exhaust air monitoring: 1 pc Door holding device, single-leaf door: 1 pc Pallet truck-accessible grating WFP 14: 1 pc Cantilever racks: 8 pcs Internal LED Ex lighting, 42 W: 1 pc Pallet truck-accessible steel drive-on ramp: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic and oxidizing media according to GHS • Roof and side walls made of fire-resistant cladding (EI120) with fire protection inside and outside. Fire protection for the floor area provided by appropriate substrate (by client) • Roof drainage via integrated gutter with internal drainage on each short side • Manufactured according to DIN EN 1090-2 • Flexible positioning either indoors or outdoors on a concrete surface • Frame structure designed according to static requirements • Structural potential equalization by grounding the steel frame • Hot-dip galvanized steel sump (S235JR; material no. 1.0038) according to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak test of the tray according to EN ISO 3452-1 with factory inspection certificate • No ground clearance. Passage underneath with industrial trucks is not possible • End-mounted lugs for securing the system to the concrete slab • Corrosivity class C3-M according to DIN EN 12944, Part 1 • Single-color 2K-PUR coating, RAL shade • Self-closing fire door with overhead door closer and anti-panic handle set, lockable via cylinder lock with Euro profile, 17 mm Nlsdpfxoyzc Dhs Ah Ueb • Easy access due to low door sill (147 mm) • Storage areas with hot-dip galvanized, removable grating shelves • Removable transport fixings in roof area II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Drive-on ramp Leakage sensor SpillGuard Connect Previous new price: €49,000 Condition: good – very good; nothing has leaked and it was only stocked with closed containers for storage. Available: immediately Location: 79312 Emmendingen Detailed offer information in PDF format available on request.

Stanje: rabljeno, moč: 160 kW (217,54 KM), Rezkalni mlin DREHER 26/90 / Rezkalni mlini Stroj je opremljen z brušenimi noži in je primeren kot mlin za izsekane mreže in folijske trakove. Tehnični podatki stroja: Pogon: 7,5 kW Noži rotorja: 5x3 Noži statorja: 2x2 Nlodsy Th Enjpfx Ah Ujb Premer rotorja: 260 mm Širina rotorja: 900 mm Z valjčnim podajalnikom

Stanje: rabljeno, Leto izdelave: 2001, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 112 kW Njdetqqlqepfx Ah Uslb = Transfer Machine Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units, Drilling & Countersinking: 5 units, Drilling, Countersinking & Tapping: 2 units), each with SK 40 tool holders, motor power per unit between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, equipped with an ABB loading robot. Accessories: Chuck (without jaws), chip conveyor, coolant system.

Stanje: rabljeno, Leto izdelave: 1997, Stations: 10 / 22 Tool holder: SK 40 Nlsdjtqqlrspfx Ah Uob Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 130 kW = Transfer machine Indexing drum with 10 workpiece stations, 22 machining units (drilling: 10 units, drilling & tapping: 5 units; drilling & countersinking: 3 units; drilling, countersinking & tapping: 1 unit; tapping: 3 units), Tool holders: SK 40 for each unit, motor power per unit between 4.5 and 5.5 kW, SIEMENS control: SIMATIC OP 3, loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system