Noris Plastic Gmbh Mischanlage 5 Grav. Dosierungen nakup rabljenega (100.660)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0700, lastna masa: 3.700 kg, največja dovoljena obremenitev: 50.000 kg, skupna masa: 53.700 kg, konfiguracija osi: 4x2, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 880 mm, skupna dolžina: 6.600 mm, skupna širina: 2.200 mm, skupna višina: 880 mm, velikost pnevmatike: 559x356, stanje pnevmatik: 100 odstotek, največja hitrost: 6 km/h, barva: oranžna, Težko nosilni transportni voziček z nosilnostjo 50.000 kg na 60 % nakladalne površine pri hitrosti 6 km/h. Dimenzije: 5000 x 2200 x pribl. 880 mm Tla transportna podlaga: vgrajena in privita duglazija 50 mm Pnevmatike: bandaže 559 x 356, 8-kratno oplaščenje Krmiljenje: štirikolesno krmiljenje z nastavljivo sledjo in krmilno palico Držalo za vlečno gred spredaj in zadaj Prikolica je pripravljena za uporabo v obe smeri vožnje Barva RAL 2000 Rodpeyq Rr Rjfx Agtet Na vsaki vzdolžni strani so štiri privarjene ušesca Dodatna oprema: dvodelni podložni klin Dokumentacija je nameščena v DOKU škatli na ohišju Odsevniki na treh straneh Vlečna gred 2000 mm z varovalom proti padcu in nastavitvijo višine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.800 kg, skupna dolžina: 5.000 mm, skupna širina: 1.250 mm, skupna višina: 650 mm, Leto izdelave: 2025, dolžina vilic: 5.000 mm, nosilnost: 5.000 kg, Transport dolly 1250 x 5000 mm with payload capacity of 5000 kg Tyres: Solid rubber bandage wheels Rjdpfx Agev Hnnkjtst Steering: Turntable with fork tine receptacle Optional side stanchions Support legs at the front for parking the dolly

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 900 mm, merilno območje os Z: 500 mm, Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 08/1999 Last calibration: 09/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Machine features, equipment: C98 control with operator panel RDS sensor technology with RST 5-position probe change magazine RST 5x probing system Reference probe Probe accessories Calibration sphere PC with monitor Software: Calypso Basic 5.4 Loading system Further accessories and options available Complete retrofit to C99 and latest Calypso version possible Available at short notice Redoufgbnopfx Agtst

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result Rodpfx Asng Exaegtet • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop Rsdpfjndn Agox Agtot • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Leto izdelave: 2015, obratovalne ure: 780 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: sn:CAI858663, ALUP Sonetto 15 500 Vijačni kompresor na prodaj – zanesljiva industrijska enota - SKUPNI DELOVNI ČAS: 780 UR!!! Na prodaj: vijačni kompresor ALUP Sonetto 15 500 v dobrem delujočem stanju, primeren za neprekinjeno industrijsko uporabo. Glavne tehnične specifikacije: Moč: 15 kW Rezervoar za zrak: 500 litrov Delovni tlak: 8–10 bar Dovod zraka: pribl. 1,8–2,4 m³/min Tip: vijačni kompresor na rezervoarju Hlajenje: zračno hlajen Krmiljenje: integriran elektronski krmilnik Stanje: Obratovalne ure: 780 ur Redno vzdrževan/servisiran Stanje olja in filtrov: zamenjano pri zadnjem servisu Trenutno delujoč / možno preizkusiti Ta kompresor ponuja zanesljivo in stabilno delovanje; idealen za delavnice, industrijske aplikacije in avtomobilske servise. Dodatne informacije: Redpfx Ageyzhmbjtst Lokacija: Győr / Madžarska Po dogovoru lahko uredim transport/dostavo Cena: 7.700 EUR (po dogovoru) Za dodatne informacije me kontaktirajte po telefonu ali sporočilu.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, volumenski pretok: 90 m³/h, skupna širina: 2.950 mm, skupna dolžina: 3.800 mm, skupna višina: 2.300 mm, poraba energije: 1 kWh, Innovative band filter technology for maximum process reliability The RESY KBF compact band filter system represents a pioneering advancement in the field of automatic band filter units. Key advantage: There is no relative movement between carrying belt, filter fleece, disc wheels, and sludge scrapers. This ensures that the filter fleece is not damaged, even when processing large quantities of chips or solid particles. Compared to conventional flat-bed filters, the compact band filter offers: - Up to 80% less space requirement - Higher degree of purity - Consistent filtration performance - Reduced maintenance intervals - Maximum process stability Operating principle of the compact band filter A robust, endless metal-link belt is half-shell-shaped guided over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is fed via a central inlet pipe directly into the completely sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filter layer and continuously improves separation efficiency. As contamination increases, the liquid level rises—depending on the design, up to 500 mm. When a predefined maximum value is reached, the system automatically advances fresh filter fleece without interrupting the filtration process. At the same time, the following are reliably discharged: - Used fleece - Sludge - Chips - Coarse particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in time when a roll change is necessary. The entire filtration process is fully automatic and energy-efficient. Custom-tailored configuration for your application Actual filtration performance depends on several process parameters, including: - Throughput volume - Medium (e.g., emulsion, oil, process water) - Inlet concentration - Desired filtration fineness - Particle size and material properties The compact band filter is configured individually according to your technical requirements. Typical applications Rodpfxjy Evxys Agtjt - Metalworking - Grinding processes - Turning and milling operations - Coolant preparation - Process water treatment - Chip and sludge filtration

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. Rjdpfxsyizxro Agtjt – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram Rjdpox A U Ncefx Agtet o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.950 mm, gradbena višina: 300 mm, dvižna višina: 1.650 mm, nosilnost: 1.500 kg, skupna masa: 450 kg, skupna dolžina: 2.500 mm, skupna širina: 800 mm, širina mize: 800 mm, višina mize: 1.950 mm, dolžina mize: 2.500 mm, transportna dolžina: 2.500 mm, transportna širina: 1.200 mm, širina platforme: 1.200 mm, dolžina platforme: 2.500 mm, zahteva za prostor dolžina: 2.500 mm, potrebna višina: 1.950 mm, potrebna širina: 1.200 mm, moč: 1,1 kW (1,50 KM), Oprema: dokumentacija / priročnik, Technical description with the following main data: Load capacity: 1,500 kg static distributed load Useful lift: 1,650 mm Closed height: 300 mm Overall height: 1,950 mm Platform length: 2,500 mm Platform width: 1,200 mm Material: Smooth sheet metal Lifting time: approx. 35 sec. for full stroke Lowering time: load-dependent Power connection: 3 x 400 V/50 Hz + protective earth, incl. 16 A CEE plug and 3 m cable Motor: 1.1 kW, 1,400 rpm Solenoid voltage: 24 V DC Degree of protection: IP 54 overall, solenoid valve and switch IP 65 Rsdpfxouhphvo Agtot Paint finish: Dust grey RAL 7037 Power unit placement: integrated into the lift table Control box: dead man's control incl. 2 m cable Total weight: approx. 450 kg

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.680 mm, obratovalni tlak: 6 letvica, končni tlak: −0,6 letvica, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, hitrost dviga: 166 mm/s, 2x Hova Column Slewing Crane • 2220847.03 • Max. load capacity: 50 kg • Outreach: 4 m • Custom aluminium jib lengths (depending on load capacity) • Smooth-running trolleys with guide and counter-pressure rollers • Custom load capacities • Slewing range up to 270°, adjustable • Standard fitted with HOVA chain hoist and vacuum lifter • Special solutions thanks to in-house production • Top-mounted aluminium column slewing jib cranes • Suspended aluminium column slewing jib cranes • Telescopic slewing jib cranes • Articulated arm slewing jib cranes • Mobile version for transport by forklift or crane 2x HOVAMAT Vacuum Lifter HV 50kg/90° • 2220847.01 • Horizontal and vertical handling of panels of all materials • Custom load capacities with overload protection • Lifting speed steplessly adjustable from 0–10 m/min • Operating voltage: 1x230V/50Hz • Operating pressure: min. 6–7 bar filtered compressed air • HOVA special handling grip for one-handed operation, with all controls for hoist and vacuum lifter • Low dead weight due to compact design • Suction pad arrangement as required with longitudinal and transverse beam • also suitable for gripping with magnets, mechanical or pneumatic grippers • Additional safety with HOVAMAT+ and continuous weight monitoring via scale. Lowering cut-out in case of slack chain, load release only after deposit, optional weight display possible Rodpfxot I S Sle Agtjt • Optional: energy-saving unit 2x Vacuum Lifters: €6,000 each 2x Column Slewing Jib Cranes: €6,500 each Sale is made under exclusion of any warranty.

Stanje: rabljeno,

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Universal Testing Machine PM5 Force: 5 kN Crosshead Stroke: 520 mm Test Chamber Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1-500 mm / min Return Speed: 700 mm / min Load Cell: 5 kN Including evaluation electronics and basic software. Rjdpfx Aeydanhegtst Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for „quick testing“ without the need for a PC. For tests requiring data storage and curve recording, our basic software provides options for control and evaluation. This allows for generating various test procedures and creating a test report. In addition, you can further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Rsdpfxjydazuo Agtet Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Universal Testing Machine PM5 Force: 5 kN Crosshead Stroke: 520 mm Test Chamber Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1-500 mm / min Return Speed: 700 mm / min Load Cell: 5 kN Including evaluation electronics and basic software. Rsdpfx Ajd R Dqbjgtst Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for „quick testing“ without the need for a PC. For tests requiring data storage and curve recording, our basic software provides options for control and evaluation. This allows for generating various test procedures and creating a test report. In addition, you can further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. Rjdsd R Dp Espfx Agtot This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2012, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9332067, VALJČNI TRANSPORTER - POGRADNA STROJNA LINJA ZA PESKANJE PROIZVAJALEC: RUMP TIP: 20-W 1500-4 Proizvajalec: Rump Tip: 20W-1500-4 Letnik: 2012 Dimenzije si lahko ogledate v tehnični risbi, prav tako tudi število obratovalnih ur. Rodpfx Agjy Entiotst Vključuje: filtrirno napravo, zvočno izolacijo, krmilno omaro, celotno dokumentacijo itd. ODLIČNO STANJE Gre za rabljeno, pripravljeno napravo za takojšnjo uporabo. Prodaja brez garancije in jamstva. Pridržujemo si pravico do vmesne prodaje in napak.

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Rjdeyz Sn Nepfx Agtjt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 39 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MZ-7321/19 / 11024, skupna višina: 2.198 mm, skupna širina: 1.648 mm, skupna dolžina: 3.500 mm, skupna masa: 3.500 kg, premer rotorja: 400 mm, širina rotorja: 850 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, največja hitrost vrtenja: 100 obr/min, moč: 30 kW (40,79 KM), Kot novo enovalni rezalnik / drobilna naprava z manjšimi sledmi uporabe. Uporabljena samo za testne namene. Gred rotorja je opremljena s površinskim oklepom. Kasetni sistem za rotorske nože 34 x 34 mm. Elektromotor 30 kW, skupna inštalirana moč 37 kW, hidravlična moč 3,75 kW, 400 V, 3-fazni. Poleg tega so na voljo novi rezalni noži za rotor in stator kot rezervni deli. Navodila za uporabo v nemščini. Statorski noži so tridelni in nastavljivi. Lijak je zaprt, perforirana plošča 40 mm. Stroj je možno prikazati pod napetostjo. Po nakupu ni garancije. Prosto nakladanje iz obrata – Raesfeld. Podrobne slike so na voljo na zahtevo. Pridržujemo si pravico do vmesne prodaje. Cene so neto. Rsdpfxsy E S S Aj Agtet

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) Redsuvigpspfx Agtet - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4)

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, moč: 2.500 kW (3.399,05 KM), vhodna napetost: 380 V, vhodni tok: 53 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 250 t, dolžina mize: 4.050 mm, leto zadnje generalne obnove: 2007, Oprema: dokumentacija / priročnik, We are offering this used Eisen u. Hammerwerk GmbH – EHT EHPS 25-40 press brake (hydraulic press brake/bending press) for sale. Immediately available. Ready for operation. Being sold due to replacement with a new machine. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Supplied with various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: Rodey D Sy Rjpfx Agtjt - Machine type: EHPS 25-40 - Capacity: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Current type: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require further information, please feel free to contact us by message or give us a call. Machine location: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: dober (rabljeno), Leto izdelave: 2013, moč: 4 kW (5,44 KM), obratovalni tlak: 10 letvica, Oprema: hladilni sušilnik, Schneider Unimaster batni kompresor UNM STS 660-10-500 XSDK 2 cilindra, zvočno izoliran, Sesalna zmogljivost 660 l/min, Dobava 520 l/min, 10 barov, Motor 4 kW, 380 V, 50 Hz, Rodpey E Iz Tofx Agtet Prostornina rezervoarja 500 litrov, popolnoma opremljen z: Hladilni sušilnik DK 600 ECO, Separator olje/voda ÖWAMAT 10, Samodejni izpust kondenzata ECOMAT, Predfilter in fini filter, kot videno, lokacija Seevetal, Vmesna prodaja pridržana

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F50, For sale is a FiberFlow F50 cooling die by DIL Engineering GmbH – a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). This cooling die is ideal for use in research and development, enabling the targeted production of fibrous, meat-like textures that are particularly in demand for modern meat and fish alternatives as well as for snacks and convenience products. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow guidance and fiber formation. The system is modular and can be configured with one or two segments as required. In addition, one or two separate cooling circuits are available, ensuring precise temperature control for consistently high product quality. Integration of inline measurement systems is possible, allowing continuous process monitoring and optimization. Special attention has been paid to hygienic design, ensuring the system meets the stringent requirements of the food industry. Thanks to its well-designed construction, cleaning is straightforward and quick, which is a particular advantage for development operations. Rodpoy D Hrbsfx Agtst The FiberFlow F50 is ideally suited for pilot trials, product development, and recipe optimization in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DRI 04320080, prevoženi kilometri: 100 km, skupna masa: 7.000 kg, vrsta goriva: dizel, barva: modra, obratovalna teža: 14.000 kg, največja dovoljena obremenitev: 15.000 kg, stanje verige: 50 odstotek, Premer palice (maks.): 61 mm, Premer cevi (maks.): 400 mm, Oprema: gumene gosenice, hidravlično kladivo, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/clamping force of 15 tons plus percussion (28 tons) from a hydraulic hammer. Rubber tracks, maximum speed 3 km/h. Suitable for installation of pipes up to Ø 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, Year: 2004, 7,800 operating hours. Main components and assemblies: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod boxes (each box contains 48 rods x 3 m) = 144 rods (432 meters) Operating options: 1. Rod manipulator for automated rod handling 2. Semi-automatic rod clamping/pulling system Rjdpfxjy H H Uue Agtot Mixing unit (8056D) with hydraulic powerpack (TT-M2), DRI 8904.B DEUTZ 4-cylinder diesel engine, bentonite pump R-72, two bentonite preparation tanks of 4,000 liters each, two BÖRGER rotary pumps for mixing Connecting cable to mixing unit Bentonite hose reel 2 drilling heads Ø110 reamer, 5t swivel Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, bushing) Price incl. VAT.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Technical Data Form type: 2-up Form height (H): 8" – 12" Rjdpfslmmarox Agtet Form width (W): min. 180 mm, max. 216 mm Paper weight: min. 60 g/m², max. 200 g/m² Weight: 175 kg Technical specifications subject to change without notice.