Arburg Allrounder 520 H 1500-400 nakup rabljenega (71.020)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Oprema: dokumentacija / priročnik, Arburg 470C 1500 400 (2014) Zlata izdaja Zapiralna sila: 150 t Premer vijaka: 45 mm Razdalja med vodili V: 470 mm Ncedpfx Aex Elqregxsr Razdalja med vodili H: 470 mm Tip: Horizontalni Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. Nedpfjyxdwdjx Agxscr • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Leto izdelave: 2007, obratovalne ure: 88.893 h, stanje: pripravljen za uporabo (rabljen), proizvajalec krmilnikov: HAITIAN, Ta Arburg A470 C 1500-400 je bila izdelana leta 2007. Opremljena je s haitianskim manipulacijskim sistemom, nameščenim leta 2022, zaščitno ohišje in transportnim trakom za odlaganje delov. S 88.893 obratovalnimi urami razmislite o možnosti nakupa tega hidravličnega brizgalnega stroja Arburg A470 C 1500-400. Za več informacij nas kontaktirajte. Dodatne informacije • Haitianski manipulacijski sistem Njdox D Rbqepfx Agxecr • Zaščitno ohišje • Transportni trak za skladiščenje delov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 55.806 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 4.850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Njdpfx Agew E Itioxecr - Year of manufacture: 2011 - Clamping force: 1500 kN - Tie bar distance: 470 x 470 mm - Mounting platen: 650 x 650 mm - Operating hours (pump): 55,806 h - Injection unit: Ø 45 / SP 400 - Shot volume: approx. 254 cm³ - Shot weight: approx. 232 g - Injection pressure: up to 1580 bar - Dimensions: approx. 4700 x 1700 x 2000 mm - Weight: 4850 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 58 h, Splošni podatki Mere širina: 4360 mm Mere globina: 1718 mm Mere višina: 3910 mm Teža stroja: 7600 kg Ncjdpfx Agjx D Nc Hoxjr Vbrizgalna enota Premer polža: 35 mm Tlak vbrizgavanja: 2500 bar Zatezna enota Zatezna sila: 1000 kN Ta stroj za brizganje Arburg ALLROUNDER 1200 t 1000 - 400 je bil izdelan leta 2018 v Nemčiji. Ima 58 delovnih ur. Stroj ima zatezno silo 1000 kN, je kot nov, rabljen samo za testiranje. Stroj mora kupec pridobiti CE certifikat, več ponudb imamo od tretje osebe, najnižja od 2.000 €. Vrsta uporabe Brizganje plastike

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref.-št.: 18643 Proizvajalec: ARBURG Tip: 470 C 1500-400 Golden Editions Leto izdelave: 2008 Enota za zapiranje Zapiralna sila: 150 ton Hod odpiranja: 500 mm Rahlo med stebri (h x v): 470 x 470 mm Min. vgradna višina: 250 mm Razpon odpiranja: 750 mm Enota za brizganje Premer polža: 35 mm Volumen brizganja: 154 cm³ Masa brizganja (PS): 141 g Tlak brizganja: 2500 bar Mere in teža Teža stroja: 4850 kg Mere d x š x v, del 1: 4,6 x 1,6 x 2,1 m Dodatne informacije & oprema Izvlek jedra: 1 kos Ncsdjxvy Rlepfx Agxsr Dodatne informacije: Na voljo je komunikacijska kartica za ProSeS vmesnik (OPC-UA). Na voljo je robotski vmesnik (EUROMAP 67).

Stanje: zelo dobro (rabljeno), Proizvajalec: ARBURG Model: Allrounder 270-S-400-70 Leto izdelave: 2010 Ncedpfox Eirwjx Agxor Serijska številka: 214269 Krmilni sistem: Krmilni sistem: Arburg Selogica Direct Upravljalna plošča: operaterski terminal Krmilne omare: kompletne krmilne in napajalne omare Parametri zapiralne enote: Sila zapiranja: 400 kN Parametri vbrizgalne enote: Premer polža: 18 mm Sistem za prevzem izdelkov (handling): Proizvajalec: ARBURG Tip: Multilift Število osi: 3-osni prevzemni robot Transport brizgancev: Transportni trak cikla – D/Š: 2.000 × 800 mm

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Ncjdpfxev D Nxlo Agxjr Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 34.217 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, skupna dolžina: 5.940 mm, skupna širina: 2.000 mm, skupna višina: 2.000 mm, skupna masa: 8.300 kg, Injection Moulding Machine ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Control: Selogica Year of manufacture: 2011 Operating hours: 34,217 h For sale is a pre-owned ARBURG Allrounder 570 H 2000-800, year 2011. This machine impresses with a screw diameter of 50 mm and a clamping force of 2,000 kN. Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a tailored quotation! Technical Data - Clamping Unit Clamping force: 2,000 kN Tie bar spacing (h x v): 570 x 570 mm Platen size (h x v): 795 x 795 mm Minimum mould height: 250 mm Ncsdjydkyzepfx Agxsr Maximum mould height: 550 mm Maximum daylight: 1,000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring D: 125 mm Fixed platen centring D: 125 mm Mould weight: 1,300 kg Technical Data - Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2,000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min⁻¹ Screw torque: 1,000 N Free injection flow: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94 m x 2 m x 2.21 m Total weight: 8,300 kg Equipment Operator interface in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Clamping force: 400 kN, heating capacity: 5.5 kW, connected load: 20.5 kW, weight: 4.7 t, operating hours: 18,287 h, on-site inspection possible. Nsdpfx Agjrc Hibsxecr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 41.881 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 217330, vpenjalna sila: 2.200 kN, premer vijaka: 40 mm, tlak vbrizgavanja: 2.200 letvica, minimalna višina orodja: 450 mm, izmetalna sila: 70.000 N, TEHNIČNI PODATKI Hidravlična zapiralna sila: 2.200 kN Maksimalna razdalja med ploščama: 1.100 mm Minimalna višina orodja: 450 mm Izmetalna sila: 70 kN Hod izmetalca: 200 mm Dolžina izmetalca: 110 mm Število hidravličnih izvlečnih enot: 2 Njdpfx Asw Suy Ijgxecr Volumen brizganja: 201/215 cm³ Specifični tlak brizganja: 2.200/1.620 bar Premer polža: 40/35 mm Polmer šobe: 15 mm PODROBNOSTI O STROJU Električna moč za ogrevanje: 13,6 kW Električna moč motorja: 30 kW Obratovalne ure: 41.881 h OPREMA Rokovalna naprava GEKU SR 500 SH, leto izdelave: 2011 Transportni trak "16"

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 16.948 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 239279, vpenjalna sila: 2.200 kN, premer vijaka: 40 mm, tlak vbrizgavanja: 2.200 letvica, minimalna višina orodja: 450 mm, izmetalna sila: 70.000 N, TEHNIČNI PODATKI Hidravlična zapiralna sila: 2.200 kN Največja razdalja med ploščama: 1.100 mm Višina orodja: min. 450 mm Izmetna sila: 70 kN Izmetni hod: 200 mm Izmetna dolžina: 110 mm Nsdpsw Su A Nsfx Agxjcr Število hidravličnih jedrnih izvlekov: 2 Volumen brizganja: 201/215 cm³ Specifični pritisk brizganja: 2.200/1.620 bar Premer polža: 40/35 mm Polmer šobe: 15 mm PODROBNOSTI STROJA Električna moč ogrevanja/motorja: 13,6/30 kW Delovne ure: 16.948 h OPREMA Industrijski manipulator SEPRO Stäubli 6X 160

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Ncedpfxevl Skge Agxsr Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: rabljeno, Leto izdelave: 2011, Decoiler Coil weight / load capacity: 4.5 t Nedpfx Ageuqfa Iexocr Maximum strip width: 520 mm Coil outside diameter: 1600 mm Expansion range: 460 - 530 mm Straightening unit Strip pass-through width: 20 - 400 mm Number of straightening rollers: 7 pcs. Diameter of straightening rollers: 60 mm Number of pinch rollers: 4 pcs. Diameter of pinch rollers: 60 mm Strip thickness: 0.4 - 3.5 mm Line speed: 2 - 10 m/min Roll feeder Maximum strip width: 310 mm Max. strip thickness: 3.0 mm Strip thickness at maximum width: 2.8 mm Strip thickness at maximum cross section: 850 mm² Number of feed rollers: 2 pcs. Diameter of feed rollers: 80 mm Maximum feed speed: 104 m/min Drive power: 1.5 kW Standard equipment: Coil loading station Effective stroke: 500 mm Load capacity: 5,000 kg Max. strip width: 500 mm

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran, Ncedpfoxirqqex Agxer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Metering volume: 154 cm³ Clamping Unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot-runner control x 12 Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) The machine features a servo motor integrated in the injection unit for dosing the plastic material Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm – 77 g/PS Ncsdpfx Agsy Dqzgsxer Integrated Arburg brand conveyor belt and sorting chute Original Weber brand rotary table, highly precise – electrically driven (inverter integrated in the machine) Rotary table and robot available at additional cost Dimensions: Weight: 8140 kg Length/width/height: 4.81 x 1.84 x 3.45 m All offered machines are commissioned by our service technicians before sale. Video of technical tests for the selected machine is available upon request, or you may participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Njdpfx Agoy Dquasxocr Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cm³ Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by a servo motor controlled by inverter Machine equipped with nitrogen accumulator/cylinder (additional charging for fast cycles) Central lubrication Integrated sorting flap Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 09/2010 4-axis robot: 3 axes driven by servo motors (electric); C axis - pneumatic Travel in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 91.720 h, Funkcionalnost: popolnoma funkcionalen, Zapiralna sila 150 kN Nodpfxjyvt R Io Agxecr Premer polža D45 mm Največji brizgalni volumen 318 cm³ Vpenjalne plošče 688 x 688 mm Skupna teža 6840 kg Stroj je opremljen z robotom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 30.665 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 196184, vpenjalna sila: 1.500 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, Oprema: dokumentacija / priročnik, Here we offer, as dealers in injection moulding machines, the following well-maintained pre-owned injection moulding machine for sale. Of course, we also purchase well-kept injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: From 01/07/2025, used machines can also benefit from a special depreciation allowance of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Used injection moulding machine with 2 additional available injection units (25 and 35 mm), currently fitted with 50 mm injection unit. See downloadable document. Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine no.: 196184 Control system: Selogica Operating hours: 30,665 h Regular servicing by manufacturer Clamping unit Clamping force: 1,500 kN / 150 tons Tie bar distance: 470 x 470 mm Mould mounting plates: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Distance between platens: max. 750 mm Injection unit 50 mm (highly wear-resistant) Injection volume: 392 cm³ Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1,670 bar Extras: 2 additional injection units: 25 mm and 30 mm 1x core pull Conveyor belt integrated in the machine bed Handling interface Sorting unit 2 x air blow-off Accumulator for fast injection Electrical connection for pneumatic needle shut-off nozzle Technology level 2, servo-controlled variable delivery pumps 9 electrical heating circuits Interface for mould temperature control unit Interface for dosing/coloring device Equipment package Extended monitoring functions Extended movement options Ncodpfxjw Rm Hds Agxor Production control Optimization / operator aids Quality assurance Documentation Any visible peripheral devices that are not specifically mentioned are not included in the scope of delivery. - Immediately available ex our Hannover warehouse, loaded free of charge or delivered free to your door against freight cost. - Function-tested (warranted functional until first commissioning).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, obratovalne ure: 30.665 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 196184, vpenjalna sila: 1.500 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, Oprema: dokumentacija / priročnik, used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently equipped with 50 mm unit Includes Geiger part removal device, integrated conveyor belt From ongoing German production, fully operational See documentation available for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regular maintenance by manufacturer Clamping unit Clamping force: 1500 kN / 150 tons Tie bar distance: 470 x 470 mm Platen dimensions: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Max. daylight between platens: 750 mm Injection unit 50 mm Shot volume: 392 cm³ Shot weight: 350 g Ncodpfjvhb Iyex Agxor Screw diameter: 50 mm Injection pressure: 1670 bar Additionally included: one 25 mm and one 35 mm injection unit Extras: - Geiger picker - Handling interface - 2x air blow-off - Pressure accumulator for fast injection - 9 electric heating zones - 4 spare cooling circuits - Equipment packages - Advanced monitoring - Extended movements - Production control - Optimisation / operator assistance - Quality assurance - Documentation - Electric conveyor belt - Sorting unit German language – complete documentation – software - Immediately available from our warehouse in Hanover, loaded free of charge, or delivered free domicile (shipping costs apply) - Function-tested (guaranteed functionality up to initial commissioning)

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), skupna masa: 28.400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. It is a robust plastics processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. The machine provides an impressive opening stroke of 900 mm and a platen size of 1280 x 1280 mm. Take advantage of this opportunity to purchase the Arburg Allrounder 920H 5000-4600 injection moulding machine. Contact us for more information about this machine. Additional Equipment • The robot and Autoline are not included. The following Piovan accessories are included in the scope of delivery: Piovan hot air dryer G35 / Piovan conveying unit PF30 / 3x Piovan temperature control unit THW118-F (+1 brand new, unused temperature control unit) Machine Advantages Technical Machine Advantages Ncodpfxsx U Tqro Agxer • Pump operating hours: 1,769 hours, hours in automatic cycle: 695 hours • Clamping force: 5,000 kN / Injection unit: 4,600 • Opening stroke: 900 mm / Tie bar distance: 920 x 920 mm / Min-max mould height: 400-1050 mm • Platen size: 1280 x 1280 mm / Ejector stroke: 250 mm / Ejector force: 86 kN Additional Information The machine has seen very little use

Leto izdelave: 1998, obratovalne ure: 62.144 h, stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, tie bar spacing: 520 mm/520 mm, platen dimensions X/Y: 715 mm/715 mm, minimum mould installation height: 250 mm, maximum opening stroke: 650 mm, ejector stroke: 225 mm, ejector force: 66 kN. Screw diameter: 55 mm, shot weight: 240 g, injection pressure: 2500 bar, stroke volume: 286 cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600 mm/1700 mm, weight: approx. 7000 kg, operating hours: approx. 62,144 h. Documentation available. An on-site inspection is possible. Expected to be available from June 2025. Nodpev Ifwxsfx Agxjcr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 63.600 h, vpenjalna sila: 1.500 kN, premer vijaka: 60 mm, tlak vbrizgavanja: 1.390 letvica, injekcijska masa: 487 g, Arburg 520A-1500-800 (207) General Information Item number: 207 Availability: In stock Njdpfx Aovt S Nxegxjcr Year of manufacture: 2007 Brand: Arburg Technical Data Shot weight: 487 g Clamping force: 1,500 kN Screw diameter: 60 mm Injection pressure: 1,390 bar Tie bar spacing: 520 x 520 mm Platen size: 700 x 700 mm Control system: Selogica Language: German Power: 74 kW Operating hours: 63,600 h Weight: 7,300 kg Dimensions: 6 m x 2.4 m Hopper: No

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 3.645 h, vpenjalna sila: 2.500 kN, premer vijaka: 35 mm, Arburg 1500T 2500-400/400/290 3K Injection Moulding Machine (235) Reference Number: 235 Nedpew Hx Uyjfx Agxocr Availability: In stock Year of Manufacture: 2009 Manufacturer: Arburg Condition of Injection Moulding Machine: Used Screw Diameter [mm]: 35, 40 Clamping Force [kN]: 2500 Platen Size [mm]: 1500 Operating Hours [h]: 3645 Weight [kg]: 11200

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Kohler straightening machine 30-400 – year of manufacture 1980 Number of straightening rollers: 9 units Ncjdpfx Aev Hrltegxer Max. strip width: 400 mm GSW decoiler AHM 1500 – year of manufacture 1999 Both units mounted together on a base frame Further data and images available on request