Orodje za rezkanje oken

LEITZ verschiedene Größen

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: Nwodoy Ehrxjpfx Anpjn X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: nepreverjeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 65 mm, premer struženja: 500 mm, moč: 10 kW (13,60 KM), Manufacturer: Werkzeugfabrik Budapest Model: EU500/1500 Turning length: 1500 mm Swing diameter – over bed: 500 mm – over cross slide: 315 mm Cross slide rotation: 18 degrees Spindle speed range: 25–1250 rpm Main spindle bore: 65 mm Spindle through-hole: 63 mm Tailstock sleeve taper (metric): 72 Lathe center taper: Morse 5 Main motor power: 10 kW Mains voltage: 3-phase, 380V, 50Hz Nodpfx Anoqwlmqjpown Machine length: 3400 mm Total machine width: 1210 mm Height: 1265 mm Machine weight: 3550 kg

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change Njdpoqlckpofx Anpswn • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, DCV6500TC VIBER – profesionalni industrijski odsesovalnik z avtomatskim sistemom čiščenja filtrov in rekuperacijo toplote DCV6500TC VIBER je sodoben industrijski odsesovalnik, zasnovan za intenzivno uporabo v mizarstvih in proizvodnih obratih. Kombinira visoko učinkovitost, tiho delovanje in energetsko varčne tehnologije. Naprava je opremljena s sistemom VIBER (avtomatsko čiščenje filtrov), TC (izolirana glava za zmanjšanje hrupa), REHEAT (rekuperacija toplote) in DAMAGE PROTECT (mehanska zaščita rotorja). Glavne prednosti stroja * Avtomatski sistem VIBER – učinkovito čiščenje filtrov brez prekinitev delovanja * REHEAT – rekuperacija toplote iz izhodnega zraka in izboljšanje toplotne udobnosti * DAMAGE PROTECT – zaščita ključnih komponent pred mehanskimi poškodbami * Popolna izolacija TC – zmanjšanje hrupa in vibracij med delovanjem * Učinkovitost 6500 m³/h – učinkovito odsesavanje prahu na več delovnih mestih hkrati * Velika prostornina zbiralnikov – 500 litrov, kar zmanjšuje pogostost praznjenja Konstrukcija in tehnologija DCV6500TC VIBER je zasnovan za največjo zanesljivost. Trdna, jeklena konstrukcija ne prenosi vibracij, dinamično uravnotežen kovinski rotor pa zagotavlja tiho delovanje in stabilnost sistema. Posebna geometrija lopatic ventilatorja izboljša učinkovitost sesanja in hkrati zmanjša porabo energije. Ohišje TC z zvočno izolacijo učinkovito zmanjšuje hrup v proizvodnji. Natančnost in učinkovitost Filtracija, ki temelji na 32 poliestrskih filtrih, ujame delce do premera 5 mikronov. Za še večjo učinkovitost je možna uporaba dodatnih filtrov HEPA. Hitro praznjenje zbiralnikov za odpadke in intuitivno upravljanje iz nadzorne omare izboljšata ergonomijo in učinkovitost operaterja. Uporaba DCV6500TC VIBER je centralni odsesovalnik industrijskega razreda, namenjen uporabi s stroji, kot so brusilniki, formatne žage, kantarji in rezalniki. Idealen je za neprekinjeno uporabo v proizvodnih obratih, kjer sta kakovost zraka in zanesljivost odsesavalnega sistema ključnega pomena. Standardna oprema * Sistem VIBER – avtomatsko čiščenje filtrov * Izolirano ohišje TC za zmanjšanje hrupa * Sistem za rekuperacijo toplote REHEAT * Mehanska zaščita rotorja DAMAGE PROTECT * Nadzorna omara z glavnim stikalom Njdpfx Aouc U N Uenpjwn * Mobilni zbiralniki z okencem – 2 kos, po 250 l Tehnične specifikacije Tehnične specifikacije Moč motorja S1 5,5 kW / 400 V, 50 Hz Število vrtljajev motorja 2900 vrt/min Učinkovitost sesanja 6500 m³/h Podtlak 3000 Pa Hrup 80 dB Premer sesalne odprtine 280 mm Hitrost sesanja 28-32 m/s Površina filtracije 16 m2 Material filtrov Poliester, 5 mikronov / kategorija filtra „G“ Število filtrov 32 Prostornina zbiralnikov za odpadke 2 x 250 L Dimenzije (d x š x v) 2440 x 930 x 2270 mm Teža 440 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, max. workpiece length 4400 mm milling spindle: 1 unit main motor: 19.2 kW control: Beckhoff CNC machining centre MASTERWOOD 4 WIN ---- Nwodpfx Anjyyqm Uopsn Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimum tool configuration - Simultaneous loading with 4 workpieces - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window construction software, i.e. the machine does not need to (but can, of course) be controlled externally from the office by sector-specific software - Powerful 19.2 kW main motor with HSK-63 E Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Tooling available for prompt delivery upon request! Request a quotation and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will also find the technical description of the machine as a PDF document attached. We would be happy to take your used machine in trade at a fair price! Matching stationary or mobile extraction units available on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (Technical specifications as per manufacturer – subject to change!)

Leto izdelave: 2026, stanje: novo, Naravna kavčukova membrana ali silikonska membranska plošča Na področju izdelave 3D pohištvenih front vam nudimo tudi rešitve za preše, stroje za rezanje folij, vertikalne skladiščne sisteme za folije ter čistilne stroje! MEMBRANA za membranske preše – iz silikona ali naravnega kavčuka Nwedpfji E Hp Tex Anpjn Najvišja kakovost, primerna za vsako membransko prešo (preše za folijo in furnir). Naše membrane lahko prejmete že narezane na želene mere ali kot blago v rolah. NARAVNI KAVČUK Tip: RM-2 Barva: siva Površina: gladka/gladka Standardne širine: 1700 in 2000 mm Kavčuk: naravni kavčuk Trdota: cca. 42°Shore Debelina: 1,8 mm, 2,5 mm in 4 mm Obratovalna temperatura: min.-20°C/max.+130°C

Stanje: rabljeno, Rabljena nerjaveča posoda Nodsw Iczrjpfx Anpown Številka artikla: 10868 Zadnja uporaba: farmacevtska industrija Volumen: 150 litrov Tip: stoječa Material (v stiku z medijem): 14301 / AISI 304 Izvedba: enostenska Obratovalni tlak po tablici: ATM Dimenzije posode: Notranji premer: 560 mm Zunanji premer: 580 mm Valjasta višina: 630 mm Skupna širina: 480 mm Skupna dolžina: 750 mm Skupna višina: 590 mm Materiali: Notranjost: 14301 / AISI 304 Zunanji deli: 14301 / AISI 304 Oprema: Tablica: ne Tesnilo Zatezni obroč

Stanje: rabljeno, Leitz HM - IV 66, komplet za okno z okvirjem in garnituro za vhodna vrata. Njdpfx Aohzgy Njnpewn Prodaja v trenutnem stanju, orodje ni bilo na novo nabrušeno. Prevzem na lokaciji prodajalca, Seevetal. Brez transporta. Pridržana pravica do prodaje tretji osebi.

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Nwedpfov Tb Hgox Anpen Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Leto izdelave: 2026, HOFMANN, tip AD 635, nova strojna oprema za obdelavo in planiranje, - TERSA nožna gred s 4 noži, - nastavitev debeline plošče s tipkami za nastavitev v hitrem ali počasnem načinu, ter nastavitev z natančnostjo 1/10 mm, - vgrajen števec delovnih ur, - plošča za obdelavo debeline, nameščena na 4 podpornih vretenih in s 4-kratno vodilno strukturo, - gumi valj za vstop in gumi valj za izstop, vključno z naslednjimi dodatnimi možnostmi: - moč motorja 7,5 kW, - brezstopenjski nadzor podajanja 4–22 m/min, namesto dveh hitrosti podajanja, Nwodpfx Anezyf Tyopjn - nadzorni sistem za pozicioniranje za model AD 635, vključno z nadzorom senzorjev prek optične pregrade, - dodatna delovna miza 630 mm, D = 1000 mm, - teleskopska potisna palica.