Lange B90KFE lepilni stroj za robove

Lange B90KFE

Stanje: rabljeno, Lange B90 KFE Debelina roba 0,4 - 3 / 5 mm Upravljalna enota: PLC-zaslonski panel na dotik Predrezalna enota za pripravo pred lepilnim delom Samodejni zalogovnik robnega materiala za rolo materiale S teflonom prevlečen hitro zamenljiv lepilni lonec za talilno lepilo v granulatu Višina obdelovanca 8 - 50 mm Natančno nastavljiv lepilni valj Škarje do 3 mm za predrezanje rolo materiala Pritiskalna enota Kapovska enota Večnamenska rezkalna enota za poravnavo, radij in posnemanje robov Enota za kopiranje kotov za končne robove do 2 mm, dodajanje iz upravljalne enote Radijska strgala Ploščinska strgala Polirna enota Hfedpey Ddnajfx Afwjf Sprejna naprava na vhodu in izhodu Letnik 2018 Stroj je FUNKCIONALEN v DOBREM STANJU Na lokaciji

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor Hfjdpfxjug Ty Hj Afwjf 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): Hfodpfed R U Agox Afwsf • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting Hfsdol Rix Nepfx Afwef • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo. Hsdpfxjym Ny Sj Afwsff

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Hjdpfx Asw I U Drofwjff Availability: short notice Location: Hochheim

Stanje: novo, Typ SK-1000-P4 Hfjdpfjdmi Ntex Afwsf Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 400 mm Arbeitshöhe (Materialstärke): 2–80 mm Polierwalzendrehzahl: frequenzgesteuert Vorschubgeschwindigkeit: 5–20 m/min Gesamtmotorleistung: 8,14 kW Scheibenmotor: 1,5 kW × 1 Scheibenschwenkmotor: 0,37 kW × 1 Schraubenwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 1,5 kW Arbeitstisch, Hub (Auf/Ab): 0,37 kW Transportmaße: 2700 × 1700 × 1600 mm Gewicht: 2.300 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ACTION M okvirna preša Preša za bilo koju vrstu prozorskog sustava: prozore, rolete s letvicama, kapke i vrata od punog drva. Maks. radne dimenzije D x V 3500x2500 mm Minimalne radne dimenzije D x V 250x375 mm Maks. vertikalni/horizontalni potisak 7,4/2 tone Hsdpewh T Dlofx Afwoff Radna visina 480/1050 mm Snaga hidraulične pumpe 2,1 kW KOMPOZICIJA STROJA: ACTION M ACTION M OKVIRNA PREŠA kom 1 109831 Normativni CE prema SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frekvencija 50 Hz 1 530074 Radne površine greda obložene PVC-om 1 530075 Međuručna poprečna greda s klipom i kontra-granicom 1 530076 Hidraulički sustav za rad pod niskim tlakom 1 530077 Oprema za trapezoidne proizvode s oscilirajućom glavom za prilagodbu različitim kutovima prozorskog sustava 1

Stanje: rabljeno, SCM P4F Four-Sided Planer Specifications: - Condition: used - Manufacturer: SCM - Model: P4F - Working width: 180 mm - Working height: 120 mm - Machine connected load: 12.5 kW - Star-delta starting - Spindle speed: 6,000 rpm - Electric adjustment of planing height - Manual adjustment of planing width Hedpfx Ajwzyfiofweff - Machine equipped with a set of heads - Infeed table length: 230 cm, width: 18.5 cm - Two feed speeds (6 and 12 m/min) - Feed rollers with spring pressure - Soundproof sheet metal enclosure - Original paintwork - Extraction port: 4 x 120 mm - Weight: approx. 1,200 kg - Overall dimensions: 330 x 110 x 130 cm (L x W x H) - NO. 02 MACHINES AVAILABLE Additional Information: - The photos show the actual condition of the item for sale.

Stanje: rabljeno, Leto izdelave: 2003, Kalibrirno-brusilni stroj SCM SANDYA 20 model 20 M3 135, rabljen leto izdelave: 2003 Hedpfx Afexwbydjwoff serijska št.: AE/024903 maksimalna delovna širina: 1350 mm hitrost podajanja: 3,5-18 m/min z inverterjem delovna višina: 4-170 mm vakumska miza: 7,5 kW Sestava: I. grupa: kalibrirni valj iz utorjenega jekla D. 250 – motor 22 kW II. grupa: brusni valj d. 250, trdota 45 SH – motor z dvema hitrostma 9/11 kW vrtljaji 1400/2800 III. grupa: kombinirani valj d. 170, trdota 30 SH + elastična segmentna blazinica s 46 sektorji – motor 11 kW z inverterjem IV. grupa: satinirni valj Scotch-Brite Pozicionirna miza z obdelovancem dimenzija trakov: 2620 x 1370 mm pihala za II. in III. trak samodejno centriranje transporterja elektronsko upravljanje I./II./III. valja/blazinice