Stroj za oblaganje robov

Lange B90 KFE

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit Bjdpfx Aew I U Drjcmolh - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Location: Hochheim

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine Blodpfxex S Hmze Acmjh - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Bedpfx Acel Rix Nemelh Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. Bledpfx Acod R U Agomoh • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish.

Stanje: rabljeno, Leto izdelave: 2008, POWER CONTROL PC 20+ Plate height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid wood edge thickness (mm): 12 Feed speed: 20 m/min Manual infeed guide Pre-milling unit EVA glue application and pre-melter unit Edge holder plate End trimming unit Double-motor overlap milling unit Double-motor offset chamfering unit with NC adjustment Double-motor rounding unit Edge scraper Glue scraper Brushing unit Bedjw Db Rfopfx Acmelh

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ključne značilnosti: Model: K 800R Kapaciteta: 1 enota, neto teža 2.472 kg Namen: lepljenje robov in obdelava lesenih ter plastičnih komponent za pohištveno industrijo Standardi: skladen z evropskimi varnostnimi predpisi (CE certifikat) Oprema in dodatki: AVTOMATSKI ENOSTRANSKI ROBNI LEPILNI STROJ Evropski varnostni predpisi (CE norme) Sestava Olimpic K 800 "T-ERL" (47) Napetost 400 V EU Frekvenca 50 Hz "AUTOSET" za sestave ER2, T-ERS in T-ERL Bodjyxcbhepfx Acmslh Elektronsko upravljanje "StarTouch" namesto "Touch 7" Distančnik panelov na dovodni ograji Elektronsko pozicioniranje zgornjega pritisnega mehanizma Horizontalni pomik enote za čelno rezanje "K-SEL" Strgalna enota robov RAS/S 2P Protizlepilna enota "AAR" Naprava "EASY SIZE" Senzor za zaznavanje robov Komplet "IGLUE" za lepilno enoto Lepilni kotel "SGP" z ročnim doziranjem namesto standardnega Pnevmatski komplet z 2 pozicijama za obrezovalno enoto RI/800 Pnevmatski komplet s 3 pozicijami za obrezovalno enoto RI/800 Razpršilna naprava (meglica) za občutljive robove Strgalna enota za lepilo "RCA/2C" Krtačna enota "SPN" Strgalna enota robov z radijem = 1 mm Strgalna enota robov z radijem = 2 mm Leseni bloki

Stanje: novo, JLT vpenjalni regali za lepljenje masivnega lesa – robno in ploskovno lepljenje Robusten in vsestranski vpenjalni sistem, posebej zasnovan za robno in ploskovno lepljenje masivnega lesa iz trdega ali mehkega lesa. Na voljo v dveh standardnih dimenzijah, je vpenjalni regal (ali panelni primež) idealen za proizvodnjo komponent, kot so paneli, pohištveni deli, elementi za stopnice, delovne površine, lepljeni bloki, mizne plošče ipd. Možno je pritrjevanje tudi okvirjev. Patentirani izravnalni vpenjalni nosilci vsebujejo vrsto pomembnih lastnosti, ki jih drugi mehanski vpenjalni sistemi nimajo, kar zagotavlja kakovostne lepilne spoje. Nosilce je mogoče poljubno premikati po okvirju, saj jih enostavno premikate bočno ali med vrstami. Ko niso v uporabi, jih lahko navpično obesite na zgornjo podporno prečko, kar prihrani dragocen prostor v delavnici. Za ploskovno lepljenje materiala do debeline 150 mm so opcijsko na voljo nihajne plošče, ki se enostavno nataknejo na zgornjo in spodnjo čeljust, ter enakomerno porazdelijo vpenjalni pritisk. Pri uporabi vpenjalca tipa 401 in nihajnih plošč je mogoče lepiti material do debeline 200 mm. Standardna maksimalna odprtost vpenjalnega nosilca je 1020 mm, večje dimenzije so na voljo po naročilu. Bodob Evnkjpfx Acmelh

Stanje: rabljeno, Leto izdelave: 2001, Debelina obdelovanca min./maks.: 6/45 mm Debelina nalimka: 0,4 - 3 mm Največja višina nalimka: 51 mm Najmanjša dolžina trakovega nalimka: 350 mm Največji previs nalimka v višino na stran: 3 mm Najmanjša širina obdelovanca: 60 mm Najmanjša dolžina obdelovanca: 180 mm Skupna dolžina: 3700 mm Širina: 1440 mm Največja višina: 1970 mm Višina vstopa obdelovanca: 850 mm Teža: ca. 850 kg Bljdpsy Dd Iysfx Acmeh Skladiščno mesto: pri dobavitelju

Stanje: rabljeno, Leto izdelave: 1997, rabljeno, v dobrem stanju Znamka Spänex Tip SMU 4500 Leto izdelave 1997 Št. stroja 4500-97/59 Naprava za čisti zrak / podtlak GS-preizkušeno za prah CE-certificirano Motor 5,5 kW Priključni premer 250 mm Tlak 2400 Pa Pretok zraka 4250/3530 m³/h nazivni volumenski pretok Bsdpew U Emqofx Acmelh Zbirni sodčki 2 kosa po 230 l Filtrirna površina 22 m² Samodejno/pnevmatsko čiščenje filtra Cena novega cca 15.000,00 EUR Potrebni prostor cca 2070 mm x 900 mm x 1965 mm Teža cca 600 kg Lokacija skladišča: 97447 Gerolzhofen, naloženo prosto, nezapakiran Predaja v obstoječem stanju, kot vidno, brez garancije in jamstva

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: 2418, Funkcionalnost: popolnoma funkcionalen, Dostopnost sredi julija 2026 Stroj si je možno ogledati in preizkusiti pri stranki. Zadnji veliki servis opravljen pri "HEBROCK" 8/2024 - Stroj z upravljanjem na dotik preko Pro-Face panela - Dajanje lepila s pomočjo lepilnega valja in rezervoarja za granulat - Hitro segrevalna komora za lepilo - 2 dodatni lepilni postaji - Tračni material 0,4 - 3 mm vklj. z ločevalnikom trakov - Trakasti material max 8 mm - Minimalna širina obdelovanca 90 mm - Minimalna debelina obdelovanca 10 mm - Minimalna dolžina obdelovanca 220 mm - Podajalna hitrost 10 m/min - Skobeljna enota za protitek in s tokom, 2 DIA-orodji - Stiskalna enota s 4 pritisnimi valji - Odkrajevana enota 0,37 kW, 15 000 1/min - Enota za poravnano/posneto/radiu frezanje 2 x 0,37 kW, 15 000 1/min - Radialna vlečna rezilna enota - Enota za zaobljevanje robov - Površinska vlečna rezilna enota - Polirna enota - "RIEPE" razpršilna enota za ločilno sredstvo - "RIEPE" razpršilna enota za čistilno sredstvo - Izvlečna opora za obdelovanec Bsdey N U S Hepfx Acmslh - Kaseta za odsesavanje ostružkov