Hladilnik

KLH .00-IND

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with 1 chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter (subspindle): 32 mm Max. front drilling diameter: 12 mm Max. front tapping diameter: M10 Max. rear tapping diameter: M10 Spindle bore diameter: 37 mm Number of mountable tools: up to 25 (depending on type) Rapid traverse X/Y/Z axes: up to 32 m/min Bar feeder length: 2,500 mm Coolant tank volume: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Njdjydaadopfx Agxewf Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Nwodpfx Agjwg Taksxef Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. Njdpfxoyyuvte Agxowf • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: rabljeno, Leto izdelave: 2014, INDEX C200 CNC stružnica 3 revolverske glave 2 vretena Fanuc krmilnik: 31i-Model B Motorna aksialna stikala: 6 kos Nsdpfx Asxxm Hfjgxswf Motorna radialna stikala: 13 kos Nosilci orodij: 11 kos Nosilci vrtalnih palic: 21 kos Zatič: 1 kos Vložki za polnjenje + tulke: Ø51/Ø46/Ø41 Nove MBL vložke za polnjenje: 2 kompleta 2 optični merili obnovljeni pri HEIDENHAIN 1 Balluff škatla z robotskimi rokami z različnimi senzorji, bližinskimi stikali in kabli Motorizirani jermeni: 6 kos Set antivibracijskih vložkov za MBL polnilnike Čas obratovanja: Čas vklopa: 37.946 Hidravlične ure: 37.500 Proizvodni čas: 26.500 Z MBL podajalnikom palic

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of sub spindles: 2 - Sub spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] - Number of slides for secondary machining: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] EQUIPMENT - CN Siemens 840D SL - 2 NCU Nwsdpfx Asw Ah R Nsgxof - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA sub spindles - 2 workpiece collectors with conveyor belt - Chip removal device for bar remnants - INDEX bar guide - Bar feeder interface - Fire protection system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 305950, Proizvajalec robota: KUKA Model: KR 60-3 – Nosilnost 60 kg Serijska številka: 705389 Letnik: 08/2018 Proizvajalec avtomatskega podajalnika (barfeeder): Iemca Model: KID 80-16 Nwodpevtba Hjfx Agxsf Serijska številka: 021916QA06 Letnik: 2019

Stanje: dober (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, skupna višina: 970 mm, skupna širina: 3.400 mm, Premični delovni stoli AT 3400 Delovna plošča iz nerjavečega jekla z zadnjo galerijo Blok predalov na desni 2 vozička za moko iz nerjavečega jekla 8 posod za sestavine na levi z nerjavečim pokrovom Rabljena naprava, očiščena Nodpfewyrw Iex Agxswf Mere: 3400 x 800 x 970 mm, ŠxGxV Možnost: Dostavna storitev Na zalogi imamo še veliko drugih miz!

Stanje: novo, Load capacity in kg: 1200 kg Fork length: 1150 mm Lifting height: 3000 mm Overall height: 2150 mm Machine weight approx. 0.625 t Dimensions (L x W x H): 1.71 x 0.8 x 2.15 m Nwjdpeifw Utsfx Agxef The ESL122 is a 24V/80Ah lithium-ion powered electric stacker. It features a high-strength chassis and a rigid mast, ensuring excellent operational stability. This model offers comfortable maneuverability and efficient, effective vertical stacking, making it ideal for use in confined spaces.

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders Nwjdpfx Agouhav Djxof

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.680 mm, skupna širina: 2.350 mm, skupna višina: 1.350 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 1.800 kg, Razpon rezanja okroglega jekla pri 45°: 300 mm, Obseg rezanja okroglega jekla pri 90°: 325 mm, dolžina tračnega lista: 4.400 mm, širina tračne žage: 34 mm, delovna višina: 750 mm, hitrost rezanja: 150 mm/min, vrsta nastavitve višine: hidravlični, Technical Specifications: Clamping Range for Bundle Clamping: Width: 0 – 300 mm Height: 5 – 300 mm Material Feed: Single: 0 – 600 mm Multiple: 0 – 9999 mm Minimum Remnant Length: Manual: approx. 70 mm Automatic: approx. 300 mm Cutting Speed: 15 to 150 m/min – AC drive Njdpfxeq Atyze Agxjwf Cutting Pressure: infinitely adjustable, hydraulic Descent Speed: 0 to 300 mm/min – stepless Saw Blade Dimensions: 4400 x 34 x 1.1 mm Saw Blade Tension: With torque wrench Machine Weight: approx. 1800 kg (net) Machine Dimensions (L x W x H): approx. 2680 x 2350 x 1350 mm Max. Support Weight: Material weight max. 250 kg/m Working Height: 750 mm With leveling elements approx. 800 mm (optional) Noise Emission: 74 dB(A) Measured at the operator’s workstation Including the two pictured roller conveyors.