Ekscentrična stiskalnica

JINAOLAN ALP-25V

Leto izdelave: 1993, stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Nlodoihf R Uopfx Agxja Cushion Capacity: 160 tons Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Njdpfx Astrhf Asgxela Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 1 used injection molding machine Manufacturer: NETSTAL Model: ELION800-270 Year of manufacture: 2007 Clamping force: 80 tons Tie bar distance: 410 x 410 mm Nsdpfx Ajwf I Hiegxjla Mold height (min./max.): 500 mm Opening stroke: 350 mm Screw diameter: 35 mm Max. shot volume: 123 cm³ Shot weight (in PS): 118 g

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: nepreverjeno, obratovalna hitrost: 110 mm/s, hitrost vzvratne vožnje: 180 mm/s, tabela razdalj do bata: 1.500 mm, skupna dolžina: 3.800 mm, skupna širina: 4.500 mm, skupna višina: 6.400 mm, We are offering a newly-built version of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer's site. Technical Data: Pressing force (T): 800 Opening force (T): 80 Motor power (kW): 55/75 + 55/75 Ram stroke: 1000 mm Rapid approach speed (mm/s): 110 Working speed (mm/s): 6 Return speed (mm/s): 180 Guide column diameter (mm): 250 Maximum pressure (bar): 250 Usable table area (mm): 3,500 x 2,000 Lower table displacement (mm): 2,000 Distance between columns (mm): 2,000 Open height (mm): 1,500 Nedpfx Agewlrv Ujxjla Total width (front) (mm): 3,800 Total width (side) (mm): 4,500 Overall height (mm): 6,400 Weight (kg): 134,600 The MV-800E/NC-SINCRO press is specially designed for the setup and testing of dies, molds, and punches. The four columns with 250 mm diameter, made from C45E steel, are manufactured specifically to withstand high stress. It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The press complies with all essential safety and health requirements pursuant to CE standards. STRUCTURE AND TABLE • A frame capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic power unit with automatic shutoff of rapid approach speed and independent operation. Equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table control movement; an electronic synchro system compensates for off-center or unbalanced forces. • The press features a lateral pressure switch for optimal job-specific pressure adjustment. • Glycerine manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds for the main cylinder feed. • The press features both manual and automatic cycles (selectable via test mode switch): • The manual cycle allows all press movements to be performed step-by-step at low speed. • The automatic cycle enables the press to execute a full production cycle. • Electrical safety system for the fall protection of the upper table. • Lower table with hydraulic withdrawal and physical stops. • The machine is equipped with a control panel featuring a touchscreen display for entering operating and calibration parameters. • Two 1,000 mm optical safety barriers (Class IV) are installed at the front and rear. • All Siemens electrical components are IP55-rated and manufactured according to current CE directives and regulations. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-checking devices for functionality and safety. Includes testing and certification of proper functionality and the safety distance of the light curtains. • Safety is further ensured by a laser and Class IV light curtain area protection system.

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 125 t Frame gap: 1050 mm Stroke: 250 mm Total power requirement: 40 kW Machine weight: approx. 8.5 t Space requirement: approx. m DUNKES CNC control type CNC 1000, controlled draw cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Shearing shock absorption Nlsdjt Hwuiopfx Agxoa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, številka stroja/vozila: Z293-068, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 407 t, širina mize: 1.500 mm, dolžina mize: 2.500 mm, skupna masa: 32.000 kg, vrsta upravljanja: CNC krmiljenje, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Ponudba velja kot zaveza za prevzem med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Širina mize: 1.500 mm Nlsdpfx Agoxm R S Iexsa Dolžina mize: 2.500 mm Hidravlični tlak: 320 bar Nazivna sila: 2 x 2.000 kN PODATKI O STROJU Električni podatki Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Priključek: 42 kW Nazivni tok: 100 A Dimenzije in teža Dimenzije: 5.000 x 4.000 x 3.800 mm Teža: 32.000 kg OPREMA CNC krmiljenje Hladilna naprava Filtrirna odsesava HILMA izhod konzol (1.600 mm)