Ekscentrični pritisk - enojni stolpec

MÜLLER ExP 80 RFHK

Stanje: novo, Leto izdelave: 1984, Pressure: 80 t Throat depth: 280 mm Stroke: 10–100 mm Strokes per minute: 52/80 spm Ram adjustment: 60 mm Table size: 850 x 550 mm Ram surface: 420 x 220 mm Through-hole in table: 300 x 200 mm Table height: 780 mm Ram bore diameter: Ø 45 mm Machine weight: approx. 4.5 t Space requirement: approx. 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Manual centralized grease lubrication Mechanical overload protection in the ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation Gedpfx Aewa Umlehmebn

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW Gbodpfxsirax Uo Ahmen -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Tlačna sila: 300 ton Dimenzije mize: 1.200 x 850 mm Prostornina: 400 mm Širina bata: 1.100 mm Odprtina v mizi: 400 x 250 mm Vgradna višina: 500 mm Število hodov: 32 1/min Hod: 30 - 140 mm Nastavitev bata: 105 mm Godod A Hbcspfx Ahmsbn Teža: pribl. 19.500 kg Ostalo - Dovoljeno za ročno polaganje delov - Opremljeno z varnostnim ventilom Herion Xsz 20 - Motorizirano centralno mazanje z mastjo - Pnevmatski batni cilindri za kompenzacijo teže - Motorizirano nastavljanje bata - T-utorji v batu - Samostoječa upravljalna konzola - Ležaji ojnic obnovljeni Zaščitni pokrovi za predkolo so seveda vključeni – glejte drugo fotografijo.

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus Gbjdpfx Aeb U Hwmohmen - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Gbjdpfx Ash Hbpwehmon Model: TT-157E Available: 14 units

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Gjdpfx Ao Ea U Hshmsbn Feed force: 90 N Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen Godpfx Ahotycdksmobn - Current UVV inspection with braking time measurement

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced Godpfx Ahstrhf Ajmobn - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: rabljeno, Presse excentrique à colonne unique WEINGARTEN type EV 63 Numéro de machine 738 / 61 Année de fabrication : 1962 Force de pression : 63 tonnes Profondeur du col de cygne : 260 mm Surface de la table : 630 x 530 mm Ouverture de la table : Ø 210 mm Surface du coulisseau : 315 x 260 mm Course du coulisseau, réglable : 8–100 mm Réglage du coulisseau : 63 mm Alésage pour épaulement d’outil : Ø 40 mm, avec pièce de serrage Hauteur d’installation : max. 450 mm Nombre de courses : 115 coups/min Besoins en air comprimé : min. 4,5 bar Puissance du moteur : 4 kW Connexion électrique : 380 Volt, 50 Hz Hauteur de table au-dessus du sol : env. 750 à 900 mm - Déclenchement électrique du coup par pédale ou commande bimanuelle - Sécurité contre les surcharges par plaque de rupture - Combinaison embrayage-frein par embrayage à friction fileté WEINGARTEN avec sécurité de passage PMH - Palier de support de vilebrequin avant - Table de presse réglable en hauteur via 2 broches filetées - Graissage centralisé manuel Gbsdpfx Ahek S Htxemen - Armoire électrique séparée - Sécurité UVV pour opérations manuelles Encombrement (L x l x h) : 1750 x 1600 x 2430 mm Poids : 4,5 tonnes Bon état

Stanje: rabljeno, Technical Specifications: Gbjdpfsvc Awxjx Ahmen Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes