CNC stružnica

HWACHEON CUTEX 180BL YSMC

Stanje: zelo dobro (rabljeno), Control: Heidenhain TNC 310 equipped with indexing head Travel paths X/Y/Z: 500/250/160 mm W axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Bdjdpjwkrn Iofx Apnji Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool – quick-change system: SF 32 Stepless speed range: 9,200 rpm Drive power: 5 kW Space requirements (W x D x H): 1850 x 2550 x 2400 mm

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total power: 28 [kW] WEIGHT AND DIMENSIONS - Required floor space: 3870 x 1670 [mm] - Machine height: 2500 [mm] - Machine weight: 6000 [kg] OPERATING HOURS - Power-on hours: 23240 [h] - Operating hours: 19500 [h] ACCESSORIES - Control system: Traub TX 8i-p - 3-colour status lamp Bedpoypxqrjfx Apnodi - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Workpiece removal - Parts conveyor belt - Bar feeder preparation

Stanje: rabljeno, Leto izdelave: 2015, CMZ TX 66 Y2 Quattro Leto izdelave: 2015 Nadzorni sistem: Fanuc 31i Največji premer obdelovanca (mm): 255 Razdalja med sredinama vreten (mm): 639 Največja hitrost (rpm): 4000 Največji premer palice: 66 mm Os X: 190 mm Os Y: +- 40 mm Os Z: 500 mm Vpenjalna glava: 210 mm 2 glave BMT 55 2 vretena 2 x os Y Prehod vretena: 66 mm Sonda za orodja Izmetalec žagovine Oprema, ki je vključena v stroj Bodpfx Aezp Itujpnsdi Dokumentacija

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 15.845 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6E182501, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 22 W, Stroj je zelo dobro ohranjen, 90% proizvodnje v uporabi ene osebe. Servisiran po priporočilih proizvajalca. Bdsdpfx Aoyvtugepnei

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Bedswb Eptspfx Apnedi Orodja v leseni škatli so priložena stroju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, - Krmiljenje Siemens Sinumerik 828D - Dodatna oprema: Vpenjalna collet glava Delovno območje Obodni premer nad posteljo: ø250 mm Obodni premer nad prečnim sanmi: ø85 mm Največji premer struženja: ø85 mm Največja dolžina struženja: 225 mm Največja odprtina za drog: ø25,5 mm Razdalja med konicama (vreteno – konica konjička): 405 mm Območje pomika sani Pomik sani X: 100 mm Pomik sani Z: 300 mm Glavno vreteno Vpenjalni priključek vretena (centrirni rob): ø70 h5 Zunanji premer vretena v prednjem ležaju: ø50 mm Sistem vpenjanja glavnega vretena Votli vpenjalni cilinder (pnevm.) s potisno cevjo, maks. prehod: ø25,5 mm Maks. velikost vpenjalne glave: ø100 mm Pogon glavnega vretena AC-motor, moč (100%/40% ED): 3,7 / 5,5 kW Bodozcv Rijpfx Apnodi z integrirano zavoro za pogonjena orodja Območje vrtljajev (brezstopenjsko nastavljivo): 60–6.300 min⁻¹ Maks. navor: 35 Nm Dimenzije Višina osi vrtenja nad tlemi: 1130 mm Skupna višina: 1820 mm Tloris postavitve (ŠxG, brez opcij): 1700 x 1270 mm Teža: 1400 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, CNC stružnica Okuma LB 3000 EX II-MYW 800 Krmilnik: OSP-300LA Leto izdelave: 2019 Interna številka stroja: 20 Razdalja med konicama ali vretenoma: 1085 mm Premer vrtenja nad suportom/posteljo: 340 / 580 mm Pomik X-osi: 260 mm Bdjdpfx Apeyk Tbhjnsi Pomik Y-osi: 115 mm Pomik Z-osi: 1.010 mm Pomik C-osi: 360 mm Pomik W-osi: 895 mm Hitrost glavnega vretena: 45 - 5.000 min⁻¹ Hitrost kontravretena: 45 - 6.000 min⁻¹ Vpenjanje: BMT 60 Revolver za orodje: V12 (gnan) Oprema: Transporter za odrezke One touch IGF Touchsetter Glavno vreteno Hainbuch Ø 65 mm Kontravreteno SMW Autoblok KNCS-N 170-43 Hladilni sistem HMF-980 s papirnim tračnim filtrom Priprava za zalogovnik palic / vmesnik za robota

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 36 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 15 m/min, skupna višina: 2.700 mm, skupna dolžina: 2.800 mm, skupna širina: 3.550 mm, širina mize: 600 mm, dolžina mize: 1.200 mm, obremenitev mize: 800 kg, skupna masa: 7.500 kg, največja hitrost vretena: 8.000 obr/min, nos vretena: SK40, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, V10 Vertical Precision Machining Center in Cross Table Design Machine Specifications: Control: FANUC 0i-MF Travel Ranges: X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle nose to table surface: 150 – 750 mm Precision: Positioning accuracy: 0.008 / 0.006 / 0.006 mm (X/Y/Z) Repeatability: 0.005 / 0.004 / 0.004 mm (X/Y/Z) Table: Table size: 1,200 x 600 mm Max. load: 800 kg T-slot size: 5 x 18 x 100 mm Spindle: Drive type: Belt-driven Max. speed: 8,000 rpm Power: 7.5 / 11 kW Tool holder: SK40 Bdsdpfx Apovtz Dxjnoi Pull stud: MAS P40T-I (45°) Feed Speeds: Rapid traverse (X/Y/Z): 36 / 36 / 36 m/min Cutting feed rate (X/Y/Z): 15 / 15 / 15 m/min Tool Magazine: Capacity: 24 stations Type: SK40 Max. tool diameter: 80 mm Max. tool diameter (with empty adjacent slot): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool to tool indexing: 2.5 sec Power supply: 30 kVA Machine weight: 6.5 t Dimensions: 2,800 x 3,550 x 2,650 mm Standard Configuration: Control: Mitsubishi M80VB 8,000 rpm belt-driven spindle 24-position tool changer Pneumatic and hydraulic lubrication system Coolant system Integrated coolant tank with chip conveyor Fully enclosed guarding Air gun 3-color signal tower Standard accessories Chip cart CE compliant Options: SIEMENS 828D FANUC 0i 10,000 rpm belt-driven spindle 12,000 rpm direct-drive spindle Spindle oil chiller NC rotary table (4th axis) Tool measurement Safety shutter for tool magazine Water gun Oil separator Chip conveyor with chip cart Oil extraction unit (pre-installation) Separate water tank for aluminum chips Cabinet air conditioner Glass scales (not for V6 series)

Stanje: rabljeno, Leto izdelave: 1988, Tehnične podrobnosti: x-pot: 800 mm y-pot: 410 mm z-pot: 510 mm Nadzorni sistem: Fanuc 10 MA Hitri pomiki x/y/z: 20/20/15 mm/min Površina mize: 1100 x 450 mm Vpenjalno orodje: BT 40 Revija za orodja: 30 BT 40 maks. dolžina orodja: 250 mm maks. teža orodja: 8 kg Moč pogona: 7,5/5,5 kW Območje vrtljajev: 6000 1/min Masa stroja približno: 6,3 t Dodatna oprema: 2 odvajalnika струžine, iztok zadaj Bdjdpfx Asy S T T Uepnoi Ponujamo celotno CNC delavnico, ki jo prodajamo zaradi starosti. Mori Seiki je še vedno izjemno natančen. Vsi obstoječi vpenjalniki za orodja in rezalna orodja, rezkalne glave, svedri, navojni svedri, primeži itd. bodo oddani skupaj. Prav tako vsi merilni instrumenti in naprave. Obstojeca naročila se lahko tudi oddajo. Absolutno ugoden začetni paket za »startup«. *

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341883, TECHNICAL SPECIFICATIONS Bjdpfx Aozb U Epspnedi Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on configuration): 630 mm Headstocks: Standardised spindle nose for use with various collets and chucks, using adaptation accessories. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, rated torque: 3 Nm Ball screw, dia. x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, rated torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Infinitely variable working feeds, X/Z axes: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, peak power (intermittent): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardised tool holder mounting: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant supply Bi-directional indexing Coolant system: Tank capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position turret VDI 30 for 6 live tool stations 1 pneumatically operated tailstock, ref. 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 revolving live centre Brucker CM5 1 ESX-25 radial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00552 1 ESX-25 axial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00550 1 KENNAMETAL ESX-25, without ESX nut 1 EWS ESX-25, without ESX nut 4 left-hand short radial toolholders, form B2, ref. 4100.0100 1 ESX-25 collet holder, form E3 with EX25 nut and 5 mm collet 1 ditto without EX25 nut 3 tapping collets Ø 4.5 / 6 / 8 mm 1 insert drill holder for indexable drills, Ø 40 mm boring, form E1, ref. 4100.00124 1 ditto, Ø 32 mm boring, ref. 4100.00107 1 ditto, Ø 20 mm boring, ref. 4100.00105 1 boring bar holder, Ø 8 mm, form E2, ref. 4100.00108 1 ditto Ø 10 mm, ref. 4100.0109 1 ditto Ø 12 mm, ref. 4100.0110 2 ditto Ø 16 mm, ref. 4100.0111 1 ditto Ø 20 mm, ref. 4100.0112 1 ditto Ø 25 mm, ref. 4100.0113 1 ditto Ø 32 mm, ref. 4100.0115 1 GARANT long, Ø 32 mm 5 steel protection plugs, form Z2, ref. 4100.00130 1 left-hand axial toolholder, force C4, ref. 4100.00103 1 pneumatically operated tailstock CM5, ref. 180-65.200 1 support stand for microscope, ref. 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref. 180-70.200 CHF 2,500.-- + VAT Except in the case of error or omission, these technical details are provided without obligation.