CNC stružnica

Okuma LB3000 EX II-MYW 800

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm Tsdpfxjym T Ite Aqtjb • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Commissioning: As Okuma stock machine 09.2017 Tjdpfsyviigox Aqtjb Controller: OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Spindle bore Ø 112 mm Motor power 32kW Torque 955Nm ▪ Hollow clamping cylinder Ø 127mm SMW VNK 320-127 with bore Ø 127mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance, self-cleaning function ▪ Drum-type sump filter TMF300 with clean tank 980l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on lower turret (not possible in combination with driven tools for the lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50-4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller guide in ZB-axis With slideway in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" Color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical monitor and tilt-adjustable keyboard ▪ Second operating system Windows 7 for operation and open, unrestricted use for Windows 7-compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with stroke +150 / -150 = 300mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20bar pressure Including bag filter, external cooling for tool spindle, pump with max. 3bar pressure ▪ Tooling system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for secure setup ▪ Machine management MacMan with integrated BDE (machine data collection) ▪ Part program storage 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 interfaces ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation by periodic speed variation ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Krmilna enota Tjdpfx Aex H Uz Njqtob Znamka: HAAS Model: Sigma 5 Glavni pogon Število osi: 2 Ta HAAS TR160 s Sigma 5 je bil izdelan leta 2016. Opremljen je z dvoosno mizo in servo motorjem Sigma 5, kar zagotavlja natančno in učinkovito delovanje. Idealno za tiste, ki želijo izboljšati svoje kapacitete obdelave. Za več informacij nas kontaktirajte. Vrste uporabe Druge obdelovalne stroje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centres: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travels: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 mm / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing internal diameter: 110 mm / 90 mm Draw tube bore: 66 mm / 52 mm C-axes: Minimum input increment: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis brake: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-station drum turret Number of tool stations: 48 (2 x 24) Tool size, square shank: 25 mm Tool size, round shank: 32 mm Driven tools: Drive system: single drive Tool spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of tool stations: 12 × 2 Tedpfx Aey Ipp Roqtjb Collet size: ER32 Straight tool holder range: 2 mm – 20 mm Cross tool holder range: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Floor space: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of delivery as per photos, includes among others: Nakamura lathe, tool holders (driven and static), collets, complete operating documentation, gantry loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the accuracy, completeness, or currency of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, premer nad prečnim suportom: 360 mm, maksimalni premer struženja: 366 mm, maksimalna dolžina struženja: 705 mm, prehod pre palico: 80 mm, hitrost vretena: 4.000 o/min, hitrost rezkanja: 10.000 o/min, moč glavnega vretena: 18,5 kW, os C: 0,001 stopinje, os Y: -/+ 50 mm, revolverska glava s 12 postajami. Mori upravljanje M730BM, opremljen z merilcem orodja, transporterjem odrezkov, trivrato vpenjalno glavo, pobiralnikom delov, podajalnikom palic. Todpfox Eituox Aqtob

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 521 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L3M0474, stružna dolžina: 500 mm, premer struženja: 300 mm, skupna višina: 2.210 mm, skupna dolžina: 3.950 mm, skupna širina: 2.260 mm, skupna masa: 5.680 kg, Oprema: dokumentacija / priročnik, Rabljeni stružnica Okuma Todpfoy Rx Tdsx Aqtjb Stanje kot novo, vzdrževano 521 ur delovanja 347 ur delovanja vretena

Stanje: skoraj kot novo (rabljeno), Bezsrediščni brusilni stroj ESTARTA 301 CNC Todpexfqzmefx Aqteb

Leto izdelave: 2001, stanje: dober (rabljeno), Universal CNC cycle lathe by Pinacho, suitable for tooling, fixture construction, training, and mold making. Swing diameter: 360 mm Control unit: Fagor 8055 Technical Specifications: - Swing diameter: 360 mm - Distance between centers: 1000 mm - Control: Fagor 8055 - Tailstock: Morse taper 3 - Tool turret: Barufaldi, 6-position - Spindle speed: 1–4000 rpm Tjdpfofglzgex Aqtsb - Electrical connection: 380 V, 5.5 kW Contact: AWM GmbH Mr. Mario Wurm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.300 obr/min, moč vretenovega motorja: 30.000 W, skupna masa: 9.100 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol Matrix, število osi: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It is equipped with a Mazatrol Matrix control unit, offering a maximum swing over bed of Ø 830 mm and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine comes fitted with a chip conveyor and a tool presetter. If you are looking for high-quality turning capabilities, you should consider the Mazak QT Nexus 350 II M we have for sale. Contact us for further information. Additional Equipment • Chip conveyor • Tool presetter • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Machine Advantages • Max. turning diameter: Ø 420 mm • Max. turning length: 1500 mm Todpfx Aqex D I Rijtsb • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tooling motor power: 7.5 kW • Max. speed of driven tooling: 4000 rpm Additional Information The machine is still under power

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm Tedev Ig Avopfx Aqtjb - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal