Podajalnik

HESSE by COILTECH CMSS MINI 100

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Lajdpfx Aljkvnums Nja Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Laodpfx Aog U Utvsl Nsa Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Lsdpjhlnzkjfx Al Njaa Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Rated load: 5,000 kN Threshold: Measurement starts at approx. 3% of the rated load (approx. 150 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full scale (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Laedpfxsfpwk Rj Al Noa Temperature range: 0°C to 70°C Temperature effects On FS output: +/-0.001% FS/°C On unloaded output: no influence (automatic zero adjustment) Overload: 50% of rated load (7,500 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zero reset with each stroke Power supply: Standard 9V block battery Approx. 30 hours continuous operation The unit features a battery change indicator Dimensions: approx. 230mm L x 190mm W, height approx. 180mm Height (exact): 7.0000 +/-0.0002" Weight: approx. 32 kg, including transport case With analog output

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, številka stroja/vozila: LSP 100T, Proizvodna hidravlična stiskalnica s H-okvirjem 100t Ledpfx Aleg Rn Efs Nsaa z vodenjem Proizvajalec Stenhoj Danska Leto izdelave 2008 Maks. pritisk sile 1.000 kN / 318 bar Stiskalni valj, dolžina hoda 400 mm Miza stiskalnice s T-utorom zgoraj 1.500x900 mm spodaj 1.500x1.050 mm Prehod stojala 1.700 mm Stanje kot novo, stroj je bil uporabljen le za poskusna zaganjanja in je od takrat skladiščen. Vse informacije brez garancije. Brez stroškov prevoza.

Leto izdelave: 2009, stanje: rabljeno, Material width 320 mm Material thickness 8 mm Number of straightening rollers 9 Ledpfx Aep U Uwiel Neaa Material cross-section 2000 mm² Machine weight approx. 4.2 t Space requirement approx. 2000x2000x2400 mm

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Lajdpe Ea U Hofx Al Noa Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, stiskalna sila: 300 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm Lajdpsh Agnusfx Al Nja For sale is a high-performance portal straightening press from Hidrobrasil with a press force of 300 t. The machine features a movable bridge construction, a laterally movable cylinder, as well as a robust grid table design, making it ideal for precise straightening, assembly, and heavy-duty applications. ==== Technical Specifications & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double-column press - Press force: 300 t (3,000 kN) - Machine weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table size: 2,500 × 1,600 mm - Open height: 700 mm - Stroke: 700 mm - Table height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack and pinion with two gear motors - Cylinder laterally movable via rack and pinion - Table in grid construction - T-slots according to customer specification (standard: 22 mm) - Induction-hardened cylinder - Machine body double-coated - Lubrication via grease nipples - Operation via swivel arm on the bridge - Pressure setting via monitor (50 – 300 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tearing force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== More Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening work, assembly work, heavy-duty machining, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double-column press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the national Brazilian safety regulation NR 12, which is based on these. Our greatest strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we primarily use components from leading European manufacturers.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Rated load: 2,500 kN Lodsfpwmpjpfx Al Nsaa Threshold value: Measurement starts at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full-scale reading (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature influence On FS output: +/-0.001% FS/°C On zero-load output: No influence (automatic zero calibration) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zeroing after each stroke Power supply: Standard 9V block battery Approx. 30 hours of continuous operation Device features a battery replacement indicator Dimensions: Approx. 185mm (L) x 200mm (W), height approx. 127mm Height (exact): 5.0000 +/-0.0002" Weight: Approx. 13 kg including carrying case With analog output

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, stiskalna sila: 500 t, SORG Four-Column Press – 500 t – 1,100 × 800 mm – Calibration Press For sale is a hydraulic four-column press (calibration press) manufactured by SORG, with a press force of 500 tons. This machine is designed for precise calibration and forming processes, offering high repeat accuracy alongside rapid operation. Its robust construction and high-performance hydraulics make it ideal for industrial series production and demanding precision applications. ==== Technical Data & Information: Hydraulic Four-Column Press – Calibration Press – 500 t ==== General Specifications - Manufacturer: SORG - Model: Four-Column Press - Machine Designation: Calibration Press - Construction Type: Four-Column Press - Press Force: 500 t - Machine Weight: approx. 22.8 t - Overall Height Above Floor: approx. 5,100 mm - Minimum Factory Hall Height: 6,500 mm ==== Working Area - Pass-Through Width: 1,100 mm - Installation Height: 800 mm - Stroke: 600 mm - Table Height Above Floor: 900 mm ==== Table & Ram Lasdjffamvjpfx Al Noa - Table Area: 1,100 × 800 mm - Ram Area: 1,100 × 800 mm - Max. Tool Weight: 2,000 kg - Max. Upper Tool Weight: 1,000 kg ==== Speeds - Closing Speed: 60–200 mm/sec - Pressing Speed: 0–9.5 mm/sec - Opening Speed: 28–200 mm/sec ==== Hydraulics & Performance - Hydraulic Pressure: 300 bar - Main Motor: 75 kW - Pump Capacity: approx. 270 l/min - Oil Tank: 600 l - Number of Press Cylinders: 1 unit - Number of Traverse Cylinders: 2 units ==== Control & Safety - Control System: Siemens S7 - Safety Control: Pilz Multi - Precise pressure and movement control for calibration processes ==== Application & Features - High repeat accuracy - Suitable for calibration, pressing and forming processes - Robust construction for continuous operation ===== Calibrating, Forming, Series Production, Precision Forming, Toolmaking Hydraulic Press, Calibration Press, Four-Column Press, Forming Press, Industrial Press, Production Press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety standard NR 12, which is based on these requirements. Our core strength lies in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses mainly use components from leading European manufacturers.