Ekscentrična stiskalnica z enim stolpcem

MÜLLER EXPSV 10 HK

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Rjdpfsfmavxex Ad Tebt Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Technical air supply: 8 bar. More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Stanje: novo, The bSander 75.200 & 150.200 are machine grinders designed for grinding pipe ends and profile ends, as well as for edge grinding and surface grinding on the top side of the unit. bSander 150.200: Belt dimensions: 150 x 2000 mm Rsdpfxod Dp Aae Ad Tjbt Belt speed: 29 m/s Drive power: 4.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg bSander 75.200: Belt dimensions: 2000 x 75 mm Belt speed: 29 m/s Drive power: 3.0 kW // 3x400 V // 50 Hz Dimensions (L x W x H): 700 x 490 x 1130 mm Weight: 72 kg Price on request

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. Rsdefg E Hpepfx Ad Tobt - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Redpfxednv D Ss Ad Tsbt Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping capacity: approx. 2000 m³/h Condition: Fully overhauled Warranty: 12 months (Image similar)

Stanje: dober (rabljeno), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Supplied with cube block. Maximum drilling diameter in solid cast iron: 20-22, 100 mm Rodsikqz Sspfx Ad Tobt Maximum drilling diameter in solid steel (R=60): 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18–1600 Automatic feed Maximum swing (distance from column surface to spindle axis): 2230 mm Drilling radius (min – max): 660–2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base table dimensions: 2490 x 1230 mm Spindle motor power: 11 HP Weight: 9000 kg

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Rbjdpfsvuuaiex Ad Tet Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: dober (rabljeno), Manufacturer: OMERA Rbedpfxokvnums Ad Tjt Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), 1 x drilling and tapping machine Wörner BG 16 with pneumatic feed (manual drilling also possible) Redpfx Aeipyiwod Tsbt cooling system Technical data: Spindle speeds: 95 - 3,500 rpm (24 steps via pulley, 2 via motor) Spindle taper: MK 2 Drilling capacity in steel: 16 mm Thread cutting in steel: M 8 The machine can be inspected under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, najv. debelina jeklene pločevine: 5 mm, Hydraulic Swivel Bending Machine Manufacturer: HOCHSTRATE Model: 3000/5 Year of manufacture: 1998 Technical Specifications Manufacturer: HOCHSTRATE Model: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm²) Motor power: 7.5 kW Space requirement: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment Rjdpfevrxnxjx Ad Tsbt • PLC control • 30 mm bending rail All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 07282, Offer 22336 Technical specifications: - Max. working width: 3030 mm Rsdsmdqllepfx Ad Tjbt - Max. sheet thickness without prebending: 4 mm - Max. sheet thickness with prebending: 3 mm - 3 driven rollers - Roller diameter (top / bottom): 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Space requirements: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - With prebending - Rear roller can be inclined - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rolls - Forward and reverse operation - Separate control panel