Vlečna in kotna žaga za les in aluminij

GRAULE ZS 200 N

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg Dodsi Dfidjpfx Abtsuu - Immediately available -

Stanje: skoraj kot novo (rabljeno),

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Duedpsk H Ic Uofx Abteu Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: MR005970, Perfectly cuts at a height of 200 mm! Allows for double mitre cuts with a fixed zero point. When setting the machine to a mitre angle, the saw blade enters the material at the same point. Technical specifications: - Fixed zero point: Yes Dedsvzl Scspfx Abteuu - Mitre angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 rpm - Motor power: 7 HP - Serial number: 2024/95/5

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Duedpfjtv Rgrsx Abtju Air pressure: 6 bar Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002

Stanje: rabljeno, Leto izdelave: 2008, Cutting height at 90°: 200 mm Dedpfxsy S Rrbo Abtjuu Cutting length: 410 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 300 kg

Stanje: rabljeno, Leto izdelave: 2000, Višina reza pri 90°: 200 mm Dolžina reza: 410 mm Območje zamikov vodoravno: 45° - 90° - 25° Območje zamikov vertikalno: 60° - 90° - 30° Valjčna proga / odlagalna miza: ne Premer žaginega lista: 520 mm Dujdey S Rq Rspfx Abtsu Hitrost vrtenja: 2800 obr/min Moč motorja: 5 kW Zavoro motorja: da Priključek za odsesavanje: 100 mm Zavoro pomika: da Dolžina stroja: Širina stroja: Teža: 300 kg

Leto izdelave: 2022, stanje: novo, Shelves: 17 Clear spacing between pipes: 60 mm Support pipe length: 650 mm Length: 200 - 2000 mm Swivel castors: Polyamide, 4 pieces Dsded Ry I Nepfx Abtouu Depth: 870 - 1180 mm Height: 198 mm Load capacity: 400 kg

Stanje: novo, 400 V three-phase brake motor, 5.0 kW Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Saw blade tilted to 45°: cutting height 140 mm Cutting length: 420 mm Djdsvxr Thepfx Abtouu Supplied with machine stand and rear hand crank for tilt adjustment

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Données techniques : Hauteur de coupe : 200 mm Hauteur de coupe à 45° incliné : 140 mm Pivotant à gauche jusqu’à 67° Pivotant à droite jusqu’à 45° 5 kW 1 frein d’avance hydraulique (en option) Longueur de coupe : 420 mm en position à 90° Longueur de coupe à 45° pivoté : 295 mm Inclinable à gauche : 60°, à droite : 30° Duodpjn R A Ewjfx Abtou Le réglage de l’inclinaison se fait à l’avant par manivelle. 1 lame de scie pour bois, diamètre 520 mm 1 convoyeur à rouleaux d’arrêt, lourd, longueur 6 000 mm, côté de montage gauche. La butée se règle par volant à main à l’avant. La longueur est lisible au millimètre près sur afficheur digital. La butée est verrouillée pneumatiquement. 1 afficheur digital, version 230 volts 1 convoyeur à rouleaux d’alimentation lourd, côté de montage droit, longueur 4 000 mm Longueur de la machine : 11 700 mm Entièrement mobile Machine emballée sur chevrons Les photos montrent la machine d’un client. Disponible sur demande aussi avec hauteur de coupe de 215 mm ou 240 mm.

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Duodpouiwqhofx Abtju Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, nazivna moč: 5 kW (6,80 KM), 5 kW 7,5 KS Visina reza 200 mm Nagib do 60° ulevo, do 30° udesno pomoću ručnog točka sa prednje strane Visina reza kod 45° nagiba 140 mm Širina reza 420 mm, širina reza kod 45° zakretanja 290 mm Zakretanje do 60° ulevo, do 45° udesno Uključuje testeru za drvo 6.000 mm teška valjkasta odmjerna staza, montira se sa leve strane, granični klizač sa ručnim točkom pomičan sa mašine, pneumatsko fiksiranje, dužina digitalno očitava, digitalni displej na 230 V Duodpfjdxw U Ijx Abtou 4.000 mm teška ulazna valjkasta staza, montira se sa desne strane Mašina pomoću ručnog točka i zupčastog prenosa nagiba se obostrano sa prednje strane, Na zahtev dostupne razne opcije, npr. veća visina reza, stezanje materijala i laserski pokazivač reza Uz odgovarajuću prepravku pogodna i za obradu aluminijuma Valjkaste staze mogu po želji biti isporučene u dužem ili kraćem izdanju

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Djdpfxsiy Ry Ao Abteuu Weight: 490 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Four-Sided Planer Weinig Powermat 500 Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle arrangement: Bottom – 5.5 kW, 8000 rpm Right – 5.5 kW, 8000 rpm Left – 7.5 kW, 8000 rpm Top – 7.5 kW, 8000 rpm Bottom – 7.5 kW, 8000 rpm Universal – 5.5 kW, 8000 rpm Spindle no. 6 equipped with PowerLock system Feed speed adjustable via inverter up to 30 m/min Feed rollers in the working table (one grooved roller for wet wood) Dsdsvfr Rgepfx Abtjuu Electromotor-driven adjustment of working height and width Pneumatic material hold-downs Drive via cardan shafts Total power: 41 kW Year of manufacture: 2005 CE Certificate

Stanje: novo, Leto izdelave: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dusdpfxoiuld So Abtou Extraction connection: 100 mm Machine length: Machine width: Weight: 300 kg