NAGEMA Arcade DS 03/85/24 pralnik za steklenice

GM Gera Flaschenreinigungsmaschine

Stanje: rabljeno, Leto izdelave: 1999, Overview The bottle cleaning machine was previously used in a brewery. Due to a complete overhaul in 2005 and ongoing maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine has already been dismantled and is stored dry, making it easy to load and transport. Technical data: - Capacity: 6,700 bph - Cell pitch: 102 mm - Bottles per row: 10 Kodpfewg E D Iex Al Njdk Dimensions and weights: - Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg - Fully equipped and operational: 7,790 x 3,450 x 2,950 mm / 20,000 kg Year of manufacture: 1999 Bottle formats: 0.33 l, 0.5 l Machine details / Features: - Steam-heated - Pre-cleaning and removal of residual liquids via pulsed rinsing before washing - CE certified - Chemical dosing pumps - Machine data sheet included - High-pressure pre-rinse - Rotating spray nozzles - Infeed/discharge at one end - Label discharge rear right - Finger removal/loading - Bottle cells made of plastic - Concentration measurement of NaOH reserve solution - Spindles made of stainless steel - 24V control voltage - Siemens S7 control system - Regularly serviced - Complete machine frame in stainless steel - Steam exhaust - Machine dismantled, ready for shipment - Automated machine start (heating etc.)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 72 kW (97,89 KM), skupna masa: 10.000 kg, Leto izdelave: 1999, obratovalne ure: 13.000 h, Liebherr L514 Stereo kolesni nakladalnik Letnik: 1999 13.000 delovnih ur 72 kW dizelski motor pribl. 10.000 kg 20 km/h Vilice + žlica Hidravlični hitri priklop Transportne mere: 6,90 x 2,49 x 3,10 m Kdsdpow Tlzfofx Al Njk

Stanje: rabljeno, Leto izdelave: 2010, Overview This bottle washing machine ARCADE GEL 6 was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in production capacity. Technical Details Nominal capacity: 33,000 bottles/hour Adjustable range: 13,200 – 36,300 bottles/hour Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pcs Total bottle cells: 7,860 pcs Bottle cells, loaded: 7,680 pcs Consumption Compressed air: 1 m³ Steam (operation): 489 kg/h Ksdpjt Ul Exjfx Al Nodk Steam (heating up): 4,430 kg/h Electrical power: 48.4 kW Water: 7.35 m³/h Tank volumes Pre-soak: 2,263 l Caustic pre-rinse: 7,240 l Caustic tank 1: 31,755 l Caustic tank 2: 350 l Hot water tank 1: 350 l Hot water tank 2: 350 l Cold water tank: 350 l

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Kedpfjn E N Ndjx Al Nedk Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: dober (rabljeno), Leto izdelave: 1994, Filling block, manufacturer: BKM / Nagema, type: Varifill 40/10K/10PP, for 12,000 bottles/hour, equipped with 40 filling valves, 10-head crown corker and 10-head screw capper (for MCA 28 closures), with double pre-evacuation, previously running on 0.33 l Longneck and 0.5 l NRW bottles, operating direction: left to right, with Siemens S5 control system, year of manufacture: 1994. Kdodsn D Hm Sepfx Al Nek Dimensions: L: 4,000 mm, W: 2,700 mm, H: 2,800 mm

Stanje: rabljeno, obratovalne ure: 35.000 h, številka stroja/vozila: LC581, Used Complete CSD Can Filling Line – 14,000 Cans/Hour – Overview This used, complete can filling line for carbonated soft drinks (CSD) is designed for the production and industrial packaging of carbonated beverages, achieving up to 14,000 cans per hour in the 250 ml format. The heart of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 can seamer with 6 heads (can end size 200). The scope includes depalletizing, can rinsing, filling and seaming, tunnel pasteurization, inline inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used filling line solution. Kdsdpoyhbpzjfx Al Njk Technical Specifications & Performance Data Core Monoblock: Filler-Seamer Filler: Ortmann Herbst, isobaric, 45 valves (Year of manufacture: 1980) Seamer: Ferrum 706, 6 heads (Year of manufacture: 1982) Product type: carbonated soft drinks (CSD) Rated output: 14,000 cans/hour at 250 ml Can end: Type 200 (Industry size 200) Monoblock configuration: integrated filler-seamer block to minimize dissolved oxygen (DO) pickup Formats & Throughput Primary can format: 250 ml Line speed: up to 14,000 CPH (depending on format and product) Included Process Equipment Kaeser compressor system with booster and two compressed air tanks (Year of manufacture 2010, commissioning 2011) CIP system, three tanks (Year of manufacture 2011) Syrup room with cooling system (Year of manufacture 2011) Nagema mixer (Year of manufacture 1992) Five finished beverage tanks, each 10,000 liters (100 hl), steel with food-grade lining Beverage filter (Year of manufacture 2011) Frezart can depalletizer (Year of manufacture 2009, commissioning 2011) Two can washers, adapted to 250 ml (Year of manufacture 2011) Hermis tunnel pasteurizer (Year of manufacture 2015) Stratec fill level inspection for cans (Year of manufacture 2000) Victor can marker / coder (Year of manufacture 2020) Kisters packaging machine (Year of manufacture 1993) Keber palletizer (Year of manufacture 1997) Sita stretch wrapper (Year of manufacture 2011) Complete conveyor system connecting all machines + two can accumulation turntables (Year of manufacture 2011) Thermo-shrink labeling line for plain cans (Year of manufacture 2015) Advanced Automation & Control Systems Inline quality control: Stratec fill level inspection for continuous monitoring and rejection of out-of-specification containers Product coding: Victor industrial printer for date/batch coding CIP capability: three-tank CIP system supports hygienic cleaning cycles for fillers and product pathways Integrated conveying and accumulation technology: conveyors with two turntables ensure even flow and buffer management for maximum uptime Detailed electrical and control documentation available upon request. Integration Options into the Production Line Upstream Section Depalletizing of empty cans (Frezart) and transfer to the can washer Dual can washers, adapted to the 250 ml format...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni parni kotel ----- - montiran na okvirju - Proizvajalec: LOOS, Gunzenhausen Tip: UL-S 1250 Zmogljivost: 1.000 kg/h Dovoljeno delovno nadtlak: 13 bar Povečan preizkusni nadtlak: 24,7 bar Polna prostornina vode: pribl. 2.320 l Letnik izdelave: 10 / 2006 CE oznaka: CE 0036 Opremljen s plinskim/oljnim gorilnikom Weishaupt GL5/1-D/ ZMD, ločeno električno omaro, napajalno črpalko Kdjdpfx Aloxnxflo Njk in obstoječimi grobimi in finimi armaturami.

Stanje: pripravljen za uporabo (rabljen), Feed the crown caps manually into the drop chute; the machine places the crown cap onto the bottle and presses it on. Ksdpfx Alefh Dlro Nedk

Stanje: rabljeno, Leto izdelave: 2018, Overview Kdjdpfx Aju I Hr Uel Njk The Gruber AFD6 is a bottling machine for bottles and party kegs, manufactured in 2018 by the German maker Gruber, with a total of 725 operating hours. The machine is available immediately. Technical Details - Capacity: 800 bottles/hour (0.33l) - 750 bottles/hour (0.5l) - 600 bottles/hour (1.0l) - 400 bottles/hour (2.0l) - 240 bottles/hour (5.0l party keg) Capacity varies depending on CO₂ content and beer temperature (in practice, up to 1,000 bottles/hour at 0.33l have been achieved). - Long tube filler with 6 filling stations - Fully automated filling process - Single or double CO₂ purging - Siemens S7 control with touch panel - Operating hours: 725

Stanje: rabljeno, Leto izdelave: 1995, Overview Kjdpfx Astrbrqol Nodk The "Sirio 7" bottle washer from the German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person. Technical Details • Capacity: up to 7,000 bottles/hour • Bottle cells designed for 1.0-liter bottles (smaller bottles can also be run; additional guide plates are required) • Bottle diameter: 78 – 90 mm • Bottle height: 288 – 310 mm • Bottle cells per row: 10 • Dimensions (L x W x H): 7,880 mm x 3,045 mm x 3,325 mm • Empty weight: 14,300 kg • Full-load weight: 25,600 kg • Installed power: 20.85 kW • Heating system: steam, 3 bar