GM Gera ARCADE GEL3 RV1-186 / 95 - stroj za čiščenje 16 steklenic (2005)

GM Gera Flaschenreinigungsmaschine

Stanje: rabljeno, Leto izdelave: 2024, Overview The bottle washing machine was previously used in a brewery. Due to the low number of operating hours, the machine is in excellent, as-new condition. It was replaced because the previous owner required bottle formats that were incompatible with the machine. All tanks and the machine body are made from stainless steel. The machine is already dismantled and has been stored dry, making it easy to load and transport. The machine is sold with a 12-month warranty. Technical Data: Capacity: 9,500 bottles/hour Cell pitch: 95 mm Bottles per row: 25 Dimensions & Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Operational with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg Year of manufacture: 2024 Formats: 0.25l, 0.33l, 0.5l, 0.75l Machine details / features: - Heated via steam - Pre-rinsing and removal of residual liquids by means of pulsed flushing before washing - CE-certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-jetting - Rotating spray nozzles - Single-end machine - Finger bottle infeed/discharge - Bottle cells made of plastic - Concentration measurement - Liquid NaOH feed - Spindles made from stainless steel - 24 Volt control voltage - Siemens S7 control system Gedpfx Ahjvrfivemsiu - Complete stainless steel machine body - Caustic extraction - Machine dismantled, ready for dispatch - Automated machine start (heating up, etc.)

Stanje: rabljeno, Leto izdelave: 2022, Pregled Ta karbonizator je bil izdelan leta 2022 pri nemškem podjetju KH TEC. Stroj je zasnovan za karbonizacijo piva. Naprava je trenutno izključena, vendar je še vedno v proizvodnem stanju in opremljena z HMI-vmesnikom ter avtomatiziranim delovanjem. Na voljo je takoj in si jo je možno ogledati na zahtevo. Stroj se prodaja, ker ga nadomešča nov sistem. Tehnični podatki Zmogljivost: 20 HL/uro Uporaba: pivo Konfiguracija: avtomatizirano, upravljanje preko HMI Godpfxeyk Ab Ds Ahmeiu

Stanje: rabljeno, Leto izdelave: 1999, Overview The bottle cleaning machine was previously used in a brewery. Due to a complete overhaul in 2005 and ongoing maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine has already been dismantled and is stored dry, making it easy to load and transport. Technical data: - Capacity: 6,700 bph - Cell pitch: 102 mm - Bottles per row: 10 Dimensions and weights: - Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Gisdpfx Aswg E D Ijhmju - Fully equipped and operational: 7,790 x 3,450 x 2,950 mm / 20,000 kg Year of manufacture: 1999 Bottle formats: 0.33 l, 0.5 l Machine details / Features: - Steam-heated - Pre-cleaning and removal of residual liquids via pulsed rinsing before washing - CE certified - Chemical dosing pumps - Machine data sheet included - High-pressure pre-rinse - Rotating spray nozzles - Infeed/discharge at one end - Label discharge rear right - Finger removal/loading - Bottle cells made of plastic - Concentration measurement of NaOH reserve solution - Spindles made of stainless steel - 24V control voltage - Siemens S7 control system - Regularly serviced - Complete machine frame in stainless steel - Steam exhaust - Machine dismantled, ready for shipment - Automated machine start (heating etc.)

Stanje: rabljeno, Leto izdelave: 2010, Overview This bottle washing machine ARCADE GEL 6 was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in production capacity. Technical Details Nominal capacity: 33,000 bottles/hour Adjustable range: 13,200 – 36,300 bottles/hour Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pcs Total bottle cells: 7,860 pcs Bottle cells, loaded: 7,680 pcs Consumption Compressed air: 1 m³ Steam (operation): 489 kg/h Steam (heating up): 4,430 kg/h Electrical power: 48.4 kW Water: 7.35 m³/h Gjdpfxet Ul Exe Ahmoiu Tank volumes Pre-soak: 2,263 l Caustic pre-rinse: 7,240 l Caustic tank 1: 31,755 l Caustic tank 2: 350 l Hot water tank 1: 350 l Hot water tank 2: 350 l Cold water tank: 350 l

Stanje: rabljeno, Leto izdelave: 1995, Overview  This bottle washing machine was built in 1995 by Swiss manufacturer PAC. The machine has been taken out of production and can be inspected in person at our warehouse. Technical Details Giedpfx Aovl Huaohmou Capacity: 6,000 bottles/hour Min/Max: 3,000 bottles/hour – 6,300 bottles/hour Bottle type: 0.5L, Euro, NRW, incl. parts kit for 330ml Vichy bottle Bottles per row: 12 Bottles in machine: 1,080 Bottle cell carriers: 96 Dimensions: Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3.6 m³/h Heat consumption at 80°C: 480 kJ/h x 1000 Electrical consumption: 11 kW Includes spare parts: - Motors for rear and front drive - Bottle cell carriers - Wear parts Machine frame entirely made of stainless steel All hot zones insulated with 5 cm insulation Belt for label removal Stainless steel heat exchanger for low-pressure steam at 116°C–120°C at 0.7 – 1 bar Self-cleaning stainless steel spray pipes

Stanje: rabljeno, Leto izdelave: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washing machine was previously used in a brewery, operating in single-shift mode. Due to a decline in sales volume, the brewery’s beer is now being bottled at another site, freeing up this bottling line. Thanks to its low operating hours and regular maintenance, the machine is in excellent condition. All tanks and the machine frame are made of stainless steel. Spare parts, such as bottle cells, are also still available. In addition, the main drive shaft as well as the SEW motor and gearbox were overhauled in 2018, and the conveyor chain was replaced in 2015. The machine is still installed and can be demonstrated. Technical data: - Capacity: 23,000 bottles/hour - Cell pitch: 85 mm - Bottles per row: 16 - Dimensions & weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Gedpjl Hx Adofx Ahmsiu Details: - Standard drives - Steam heating - Operator side left - CE certified - Chemical dosing pumps - Machine specification sheet available - Fixed-pipe sprayers controlled by machine cycle - Single-ended machine - Label discharge rear right - Finger discharge and finger feed - Bottle discharge left - Bottle cells plastic - HMI Lauer - Caustic concentration monitoring - 24V control voltage - S5 control system (conversion to S7 available on request) - Regularly serviced - Stainless steel water share - Steam extraction - Sampling valves - KSB pumps in stainless steel - Insertable strainers for baths - Water meter - Conductivity measurement by Endress Additional features: - Spare parts included

Stanje: rabljeno, Leto izdelave: 2014, Overview This complete glass bottling line was produced between 2010 and 2014 by several renowned European manufacturers, including CIMEC (Italy). The main block – a CIMEC 16-16-1 rinsing, filling, and capping unit – was built in 2014 and operated in a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as a self-adhesive and wrap-around labeler, a DE filter, and a heat shrink tunnel for capsules, making it a fully functional and compact bottling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical Data Years of construction: 2010-2014 Application: Water and other beverages Output: Approx. 2,000 bottles per hour (330 ml) Approx. 1,670 bottles per hour (500 ml) Bottle formats: 250 ml - 1,000 ml (including 330 ml & 500 ml) Closure type: 26 mm crown cap Configuration (monoblock): 16 rinser heads 16 filling heads 1 crowning head Scope of supply Rinser / filler / crowner monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3,500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyors DE filter | Spadoni | – | 2011 | 80 hl/h Shrink tunnel for capsules | TOSA | TN1 | 2011 | For PVC capsules Giodpoyb Tkdjfx Ahmou

Stanje: rabljeno, Leto izdelave: 1999, Uporabljeni polnilni stroj Fimer 1999 Gsdpjvlnvljfx Ahmeiu Uporabljen polnilni stroj za polnjenje vina v dame-jeanne, proizvajalec Fimer, model RT 8/1 VA, letnik 1999. Doseže kapaciteto 400 dame-jeann na uro pri formatu 5 litrov, medtem ko pri 12-litrskem formatu doseže 200 dame-jeann na uro. Smer vrtenja je v smeri urinega kazalca, stroj ima 8 ventilov in omogoča volumetrično polnjenje. Opremljen je s standardno pipo premera 20,5 mm ter aluminijastimi navojnimi pokrovčki velikosti 35 x 18 mm. Polnilni stroj se prodaja z vsemi varnostno-zaščitnimi sistemi, popolno dokumentacijo in uporabniškimi navodili. Stroj je bil začasno konzerviran (mothballed). Stroj je v dobrem stanju; v zadnjih letih je bil uporabljen za polnjenje vina v 12-litrskih dame-jeann-ah.

Stanje: rabljeno, Leto izdelave: 2012, Overview  The Krones, Gera, Joha, Markl, Miho returnable glass bottle filling line was previously used for bottling beer at a brewery in southern Germany. Technical Data  Capacity: 7,800 bottles/hour Products: Beer and KEG Formats: NRW 0.5 l, 0.33 l, ring neck 0.25 l LN Machine List  Machine Type: Depacker Manufacturer: BMS Giodpfoyb Sbuex Ahmeu Year of Manufacture: 2012 Machine Type: Decapper (screw cap) Manufacturer: Rink Decapping in crate Euro 0.5l in 4x5 crate Year of Manufacture: 2012 Machine Type: Bottle Washer Manufacturer: Gera Year of Manufacture: 2024 Machine Type: Empty Bottle Inspector Manufacturer: Krones Model: Smarttronic incl. Pusher Year of Manufacture: 2012 Machine Type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 valves Year of Manufacture: 2012 With Combi Capper, 4 heads (crown caps and screw caps) Capacity: 7,800 bph Machine Type: Labeller Manufacturer: Krones Model: Robusta Overhauled in 2012 10 bottle plates 2 labelling stations with 4 grippers & 4 glue palettes Inkjet printer Machine Type: Packer Manufacturer: BMS Year of Manufacture: 2012