Stroj za vrtanje moznikov

Ganner Optima 21/510

Stanje: rabljeno, Leto izdelave: 2011, Premer struženja: 160 mm Lredpfxsyuzfpe Ahuen Dolžina struženja: 550 mm Krmiljenje Siemens Teža stroja cca 9.000 kg Maks. dolžina struženja: 550 mm Maks. preboj palice: 65 mm Maks. premer struženja: 160 mm Z MBL 3 revolverski glavi z hladilnim stolpom Dodatni hladilni rezervoar s filtrom in črpalkami. Črpalka: 8 bar – 20 litrov + 20 bar – 30 l/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 28.742 h, Funkcionalnost: popolnoma funkcionalen, prehod palice: 65 mm, FANUC Serija 31i-Model A Ljdpfx Ahsydmbueuorn 3 revolverji Transportni trak za dele Magazin Dodatne informacije na zahtevo

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: Lredpfjxnlfljx Ahusn - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste

Stanje: rabljeno, Leto izdelave: 2017, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 76 mm Counter Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Parts ejector: Pneumatic Travel in Z: 800 mm Tool Turret I (X/Y/Z): Technology: 12-position turret Tool mounting: VDI30 Driven tool speed: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool Turret II (X/Z): Technology: 12-position turret Tool mounting: VDI30 Driven tool speed: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/Accessories: Chip management: Chip conveyor Lodpfxey A U Izj Ahuorn Coolant management: High-pressure coolant system with paper band filter, 40 bar Raw material feed I: Robot interface prepared Raw material feed II: Bar loader interface prepared Finished parts removal: Workpiece pickup device with conveyor belt Oil mist extraction: Interface prepared Tool holders: Various fixed and driven holders Additional equipment: Automatic work area door, rinse gun

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h Lredpfxjx D Iuzo Ahusn • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500358, stružna dolžina: 1.250 mm, premer struženja: 300 mm, moč vretenovega motorja: 43 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, INDEX G300L with Promot portal loader. The machine is still in production and under power. The Promot loader is equipped with 2 rotary indexing conveyors, each with approx. 30 pallet positions. The machine features high-pressure coolant supply (40 bar), a paper band filter, and a tool changer. Further information available by email. Ledpeu Nmq Hefx Ahusrn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, stružna dolžina: 744 mm, premer struženja: 430 mm, izvrtina vretena: 65 mm, Control System: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline Ljdpfxoyx U Hie Ahuern TECHNICAL DATA Swing diameter * over bed 600 mm * over cross slide 500 mm Distance main spindle - counter spindle 975 mm Max. turning diameter 430 mm Max. turning length 744 mm Max. bar diameter 65 mm Max. workpiece size with counter spindle ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0 – 5,000 rpm Max. bar capacity 65 mm Max. chuck size 200 mm C-axis *Resolution 0.001° Counter spindle Drive power (100/40% duty cycle) 17/22 kW Speed range 0 – 7,000 rpm Max. chuck size 200 mm Traverse path (Z-axis) 750 mm C-axis *Resolution 0.001° Upper turret Disc turret with directional logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0–4,000 rpm Travel range: * X-axis 270 mm * Z-axis 750 mm * Y-axis +50 mm Lower turret Disc turret with directional logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0–4,000 rpm Travel range: * X-axis 205 mm * Z-axis 750 mm EQUIPMENT/ACCESSORIES  Fully enclosed electrical safety guarding with sliding doors and machine light  Bar loader magazine IEMCA Master 890 MP (left side) for 3,300 mm bar length including: guide channel, centering device, axial displacement  Thermal compensation systems for integrated spindle motors (liquid-cooled)  Hollow clamping cylinder with draw tube for main spindle  Full clamping cylinder with draw rod for counter spindle  C-axes for main and counter spindle  Transmit software for easy C-axis programming  Y-axis in upper turret (cutting force distributed over 2 axes for extremely high rigidity)  Drive unit in upper and lower turret  Parts ejector and flushing through counter spindle  Parts catch device for finished parts Finished part max. ø 65 x 200 mm Max. part weight 4.5 kg  Conveyor belt for transporting finished parts out of the machine  Turret steady rest incl. VDI 30 base holder, actuated centrally via coolant supply (14 bar) Diameter range 10 – 70 mm  Coolant system with 2 high-pressure pumps, each 14 bar, and 2 rinse pumps, each 3.7 bar  Cleaning pistol for cleaning clamping devices, covers, and entire work area with coolant  Chip conveyor (hinge belt type) extended version for portal application, suitable for: - long steel chips - chip tangles - wool chips - dry and wet machining  Electronic oil mist separator 800–1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and counter spindle  Foot switch for operating the clamping devices  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  HAINBUCH collet chuck size 65 for counter spindle, with stop, type 100 (without collets)  3-color alarm lamp (red, green, white)  Serial interface  Mounting elements  Documentation

Stanje: rabljeno, Lokacija skladišča: Sonnefeld Lodeway Dcepfx Ahuorn

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 4.262 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7AV13, premer struženja: 65 mm, Možno ga je priključiti na elektriko, stanje podajalnika palic je neznano, iz proizvodnje odstranjen zaradi prihoda novega stroja. Na obeh revolverskih glavah je možno uporabljati vrtljiv nosilec orodja na vseh položajih. Lrodoyxxhqopfx Ahuon

Stanje: rabljeno, Leto izdelave: 1997, Rabljeni stroj Letnik: 1997 Stanje: vzdrževan Oprema in tehnični podatki: Lrodpfx Aoxwz Ihjhujn - Število vrtalnih vreten: 21 kosov v razmiku 32 mm - Smer vrtanja: od spodaj in s čelne strani - Nagib: 0-90 stopinj z ročnim kolesom - Pnevmatski vpenjalci materiala: 3 kosi - Prehod: maksimalno 100 mm v višino in maksimalno 640 mm v širino - Motor: 1,5 kW - Premer odsesovanja: 120 mm - Vključno z različnimi omejilniki (glej slike) Razpoložljivost: takoj Lokacija skladišča: Röllbach