CNC stružno-rezkalni center

EMCO Hyperturn HT 665 MC plus

Stanje: rabljeno, Leto izdelave: 2015, Tehnične podrobnosti: Število vreten: 6 Dcsdpfsxc Idmjx Ah Ijf Prehod vretena: 22 mm Polni avtomatski podajalnik palic je dolg 4,70 metra - za 3-metrski material. Stroj je še vedno priključen na elektriko. Material za obdelavo na stroju: jeklo. Obdelava z oljem. Stroj ima le Single-NCU brez PCU. Celoten dovod energije za vseh 6 glavnih vreten je bil zamenjan aprila 2025.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Dcsdpfjwp D Nbex Ah Ijf Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and drawing • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm Dedpfsx D E Hbsx Ah Iscf • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stanje: rabljeno, Leto izdelave: 2003, Drehdurchmesser 190 mm Drehlänge 620 mm Steuerung Fanuc Series 18i-TB Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 13,5 t Raumbedarf ca. 5350X3350x2395 m Djdpfjxiy Ausx Ah Iocf CNC Dreh- und Fräszentrum NAKAMURA TOME Super NTJ Baujahr 2003 Steuerung Fanuc Series 18i-TB - Hauptspindel muss überholt werden. - Oberer Revolver ist mit einer G42 Turbo- Luftangetriebenen Spindel 60000 U/min und Steuergerät GTR 3 nachgerüstet. Anzahl der Achsen: 9 Anzahl der Revolver: 2 Max. Drehdurchmesser: 190 mm Max. Drehlänge: 620 mm Stangendurchlass: bis zu 65 mm Umlaufdurchmesser über Bett: 190 mm Anzahl: 2 (Haupt- und Gegenspindel) Spindelnase: A2-6 Antriebsleistung: 15 kW Max. Drehzahl: 60000 U/min X-Achse: 345 mm Y-Achse: +/- 45 mm Z-Achse: 1240 mm B-Achse: +/- 91° oben voll Servogesteuert 0,001° Stangendurchlass: D 65 mm - 12-fach Revolver für angetriebene Werkzeuge - 24-fach Revolver für Drehwerkzeuge (Doppelhaltertechnik) - mit viel Zubehören - 2 x HB-Futter Hainbuch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, višina struženja: 3.000 mm, teža obdelovanca (maks.): 30.000 kg, premer struženja: 3.500 mm, moč: 100 kW (135,96 KM),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, INDEX MS40-6 CNC večvretenski stroj Leto izdelave: 2011 Prva uporaba: 2012 Krmiljenje: Siemens 840D (dvojni NCU) Premer materiala v palici: 40 mm Pomikalne enote Pozicija 1.1: NC pomik X / Z Pozicija 1.2: NC pomik X / Z Pozicija 2.1: NC pomik X / Z Pozicija 2.2: NC pomik X / Z Pozicija 3.1: NC pomik X / Y / Z (Y ± 21 mm) Pozicija 3.2: NC pomik X / Z Pozicija 4.1: NC pomik X / Z Pozicija 4.2: NC pomik X / Z Pozicija 5.1: NC pomik X / Z Pozicija 5.2: NC pomik X / Z Pozicija 6.1: NC pomik X / Z Pozicija 6.2: NC pomik X / Z Pozicija 6.3: NC pomik X, Z fiksno Podajalec palic Revijski podajalnik IEMCA SIR MS40/33/P Manipulacija z obdelovanci Odvod obdelovancev na vretenu pozicije 6 Transportni trak za obdelovance na vretenu pozicije 6 Sinhronizacijska enota na vretenu pozicije 6.1 Izmetalnik obdelovancev Priključek za dovod emulzije skozi proti-vreteno Zadnje obdelovanje Nastavek na pomikalni enoti pozicije 6.2 Možnost do 3 fiksnih nosilcev orodij Priprava za pomožni pogon Električna predpriprava za 2 pomožna pogona z elektronsko osjo (pozicije 1–3), sinhronizirano z glavnim in proti-vretenom Električna predpriprava za 2 pomožna pogona z elektronsko osjo (pozicije 4–6), sinhronizirano z glavnim in proti-vretenom Združljivost s pomožnimi pogoni z inkrementalnim dajalnikom (dvojni modul) Sistem za odvod ostružkov in hladilne tekočine Prečni členkasti transporter za ostružke, izhodna višina 1200 mm, prednji izhod z dvižnim črpalko za filtrirno enoto Enota za filtracijo hladilne tekočine (50 Hz): Rezervoar hladilne tekočine: 800 L Vakuumski rotacijski filter: 650 L zmogljivosti Djdpfx Aoxndgzjh Iecf Ploščni izmenjevalnik toplote za hlajenje emulzije Črpalka za izmenjevalnik toplote: 80 L/min 7 bar Nizkotlačna črpalka: 300 L/min 4 bar Visokotlačna črpalka: 55 L/min 40 bar Varnost in okolje Avtomatski CO₂ gasilni sistem z optično/termično zaznavo Priprava za centralni odsesovalni sistem Zapiralni loput za centralno odsesavanje oljne megle Možnosti krmiljenja in NC funkcije 16/16 poljubno programabilni vmesnik za vhode/izhode Transmit / Tracyl funkcija (frezanje valjastega ovoja na zunanji in čelni strani) Dvostranska transmit funkcija za transformacijo Y-osi NC opcija: proti-vreteno / poliogonsko struženje z elektronsko osjo Spremljanje procesa Vgrajen ARTIS sistem za spremljanje procesa na osnovi navorov, toka ali merjenja moči Do 4 kanali (maks. 8 pogonov) za spremljanje 4 orodij sočasno na postajah 1–3 Do 4 kanali (maks. 8 pogonov) za spremljanje 4 orodij sočasno na postajah 4–6

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE Dcodpouhhp Sofx Ah Ijf - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: SIEMENS Premer vretena: 65 mm Stružna dolžina: 660 mm Maks. število vrtljajev: 6.000 1/min Proti-vreteno Z= 700 mm Dcodpeyi Uk Isfx Ah Iof NOSILEC ORODJA 1 z rezkalnim vretenom Rezkalno vreteno: 7.200 1/min B-os 360° 14 postaj z gnanim orodjem Vrtljaji orodij: 7.200 1/min Pomiki: X= 230 / Y= +- 65 / Z= 845 NOSILEC ORODJA 2 14 postaj z gnanim orodjem Vrtljaji orodij: 7.200 1/min Pomiki: X= 140 / Y= +- 45 / Z= 810 Transporter za ostružke Filter Podajalnik palic INDEX MBL

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. Dcsdjt Hw H Espfx Ah Ief We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of sub spindles: 2 - Sub spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] - Number of slides for secondary machining: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] Djdpfow Ah R Njx Ah Ijcf - Connected load: 75 [kVA] - Production hours: 20,000 [h] EQUIPMENT - CN Siemens 840D SL - 2 NCU - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA sub spindles - 2 workpiece collectors with conveyor belt - Chip removal device for bar remnants - INDEX bar guide - Bar feeder interface - Fire protection system