CNC stružnica

EMCO Hyperturn 65

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and drawing • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Dusdpfx Anex D E Hbjxou Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stanje: kot nova (razstavni stroj), Various designs available, such as round, hexagonal, or square, and in smooth, cross-serrated, or both longitudinal and cross-serrated versions. Dedoh Dmamopfx Anxsuu A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our homepage. We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Stanje: novo, moč: 25 kW (33,99 KM), potovalna razdalja osi X: 1.430 mm, pomik osi Y: 670 mm, pomik po osi Z: 640 mm, teža obdelovanca (maks.): 1.200 kg, število mest v zalogovniku orodij: 30, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.900 mm, skupna dolžina: 4.855 mm, skupna širina: 2.945 mm, skupna masa: 11.000 kg, Oprema: CE označba, dokumentacija / priročnik, LAGUN L 1400 Machining Centre – available at short notice The LAGUN L 1400 machining centre stands for high precision, robust construction, and cost-effective production. Ideal for single part and series manufacturing in machine building, tool & die making, and contract machining. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / hire purchase available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), renowned for robust design, high dynamics, and durable machine concepts. The machining centres are impressively reliable, easy to maintain, and offer low operating costs. Technical specifications: Control system: HEIDENHAIN TNC 7 CNC control HEIDENHAIN 16" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-hinged viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: Dusdpfx Ashy Atfenxou ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and commissioning included ✔ Reference machines available in Germany Contact us – we will gladly advise you and provide a customised quotation.

Leto izdelave: 1971, stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Duedpfx Aned Ha E Sjxju Coil weight: 10 t Mandrel Ø: 508 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 35.598 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07400004031, moč vretenovega motorja: 20 W, hitrost vretena (min.): 3.250 obr/min, največja hitrost vretena: 5.000 obr/min, prehod palice: 90 mm, skupna masa: 10.000 kg, capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - asse Y sulla torretta superiore - contropunta - controllo Siemens 840D powerline - macchina in condizioni perfette, sempre utilizzata con olio - attrezzatura eccezionale - alimentatore di barre LNS Sprint S2. Dodjuyx Hzopfx Anxeuu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, CNC stružnica Proizvajalec: Gildemeister Tip: CTX 420 linear V3 Leto izdelave: 2003 Krmiljenje: Heidenhain Plus IT Premer vrtenja nad ležiščem: 680 mm Premer vrtenja nad pripravnim vozičkom: 565 mm Prečno pomikanje: 260 mm Vzdolžno pomikanje: 635 mm Pogonska moč: 40/100% 25/37 kW Območje vrtljajev: 20 – 5000 vrt/min Teža cca.: 6500 kg Dedpfjxc Uq Tex Anxeuu Oprema: Pogonska orodja: 12 postaj Nosilec orodij: 12-kratni Sauter revolver VDI 30 Delni votli vpenjalnik Konjiček Samodejni pomik pinole Vpenjalni vretenec: Mk 5 Odvajalnik ostružkov Merilna roka Odvod oljne megle Pridržujemo si pravico do napak.

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band Djdpfx Aohpktvsnxsuu - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A Dsdjfu Ivzspfx Anxeuu • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, which includes: - Single-lane elevator - Three-lane elevator - 24-head weigher with 1L hopper - 32-head weigher with 1L hopper - KEN Hygiene System EWD 50 (Weigher auxiliary equipment washing station) Dusdpopxm Ugsfx Anxsu - Platform with stairs - Distribution tools – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set was only used for equipment testing, with approx. 100 operating hours. The line was dismantled by authorized Cabinplant and Multivac service teams.

Stanje: novo, Leto izdelave: 2026, -TFON Kantenverrundungs- & Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl Duedpfxehq A T Uj Anxju -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenverrundung: Erzeugt eine Radius-2-Kantenverrundung für glatte, sichere Kanten und verbessert sowohl Optik als auch Funktionalität des Werkstücks. -Präzisionssteuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichbleibende Prozesssteuerung. -Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen flexible Arbeitsabläufe, verschiedene Arbeitsschritte können zeitgleich oder aufeinanderfolgend ausgeführt werden. -Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm – für individuelle Produktionsanforderungen. -Tischvarianten: Flexible Konfigurationen – magnetisch, vakuum oder magnetisch-vakuum – für sicheren Halt von unterschiedlichen Materialien und Werkstückgrößen. -Plasma- und Sauerstofftechnik: Modernste Plasma- und Sauerstofftechnologie entfernt zuverlässig Grobgrate und Schlacke nach dem Schneiden und sorgt für saubere, glatte Oberflächen. -Oberflächenreinigung: Beseitigt effizient Oberflächenverunreinigungen wie Rost, Oxid- oder Zunderschichten und bereitet die Teile optimal für die Weiterverarbeitung vor. -Kantenverrundung für Beschichtungen: Ermöglicht die perfekte Vorbereitung für Lackierungen und Beschichtungen durch eine gleichmäßige, fehlerfreie Oberfläche. -Branchenanwendungen: Ideal für Stahl-Servicecenter, Energiebranche, Bergbau, Bauwesen und Automobilindustrie – maßgeschneiderte Lösungen für anspruchsvolle Einsätze. -Uniforme Ergebnisse: Sechs Lamellenräder arbeiten synchron und gewährleisten gleichmäßige Radien an allen Kanten jedes Teils. -Pneumatisches Oszillationssystem: Verlängert die Standzeit der Schleifbänder durch reduzierte Abnutzung und sorgt für dauerhaft konstante Bearbeitungsqualität.