Paralelna stružnica 385 x 1000 mm

FERVI T095 F10

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor Djdsrqwbiepfx Aplscg ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Leto izdelave: 2000, Swing diameter: 340 mm Turning length: 2000 mm Control: FAGOR 8055 Swing over bed: 550 mm Spindle bore: 108 mm Dcodpfx Ajvwgpbspleg Spindle speeds – stepless: 2500 rpm Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Machine weight approx.: 4,300 kg Space requirement approx.: 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered complete with all accessories. Description: - Coolant system - 1 open steady rest 20-145mm - 1 closed steady rest 15-185mm - 1 face plate - 1 three-jaw chuck - 1 wedge bar chuck D=400mm - Parat 4-position tool holder - Assorted tool holders

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 350 mm, 3-osni digitalni prikazovalnik Horizontalno in vertikalno rezkalno vreteno Pinola Tehnični podatki: Dolgobna posuv X / vzdolžno pomikanje X: 450 mm Dedpfxswyit Hj Aplocg Prečna posuv Y / prečno pomikanje Y: 300 mm Navpična posuv Z / navpično pomikanje Z: 350 mm Velikost mize: 800x400 mm Vpenjalni konus vretena: SK40 Območje obratov: 50-2500 min⁻¹ Območje pomika: 8-400 mm/min Pogonska moč: 3,2 kW Teža stroja: 1500 kg Tehnični podatki, pribor in opis stroja niso zavezujoči.

Stanje: zelo dobro (rabljeno), Krmiljenje: Heidenhain Positip 850; Vpenjalni sistem orodja: SK 40; Hidravlično vpenjanje orodja; Hod pinole: 100 mm; Miza: 800x480 mm; Pomiki: x-600 mm, y-400 mm, z-400 mm; Hitri pomiki; Podajalne hitrosti: 63-800 mm/min (18 stopenj); Število obratov: 63-3150 vrt/min (18 stopenj); Dsdpfx Aelkgvboplocg Dodatki: Hladilna naprava, vpenjalna glava za vpenjalne tule, vključno s tulemi, utorni glavi.

Stanje: rabljeno, Details on request. Dcsdpfeb E Evbsx Aplog

Stanje: zelo dobro (rabljeno), Heidenrich & Harbeck B3 SB globokovrtalni stroj Kapaciteta: 10.000 mm, 4 podporniki Dcedpfxow U Uhkj Apljg 2 dušilca za vrtalne palice Pladenj in košare za ostružke Orodje, Kontravrtenje

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. Dedpfx Ajuddimoplecg MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing

Stanje: zelo dobro (rabljeno), SK 50 tool holders (28627) various manufacturers: - Bilz - Kelch - Sandvik Dedpfxswl U Tcj Aplecg - Clarkson Approx. 90 pieces

Stanje: dober (rabljeno), Maximum wheel diameter: 1600 mm Wheel width: 250 mm Module – max.: 30 Module – min.: 8 Tooth height: 58 mm Tooth width: 250 mm Machine weight approx. 42.3 t Space requirements approx. 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° Minimum: 150 Maximum: 800 Dcsdpeu Dbucjfx Apljg - Cone angle, in degrees Minimum: 5 Maximum: 85 - Tooth angle Minimum: 0° Maximum: 45° - Number of teeth to be cut Minimum: 10 Maximum: 150 The machine is complete, fully functional, and in good condition. Equipment / Accessories: - Complete set of change gears - 4 cutter heads - Various milling cutters - Operating manual in English

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 120 mm, pomik osi W: 450 mm, For sale: Hauser S35-400 Coordinate Grinding Machine The machine is in excellent condition and was partially overhauled for €15,000 in 2024. It comes equipped with 6 high-quality grinding spindles, a face spindle, and turbine spindles. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 120 mm W-axis travel: 450 mm U-axis travel: 5.5 mm Taper grinding: max. 16° Table size: 600 x 380 mm T-slots: 6 pcs, 10 mm width, 50 mm spacing Table load: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rate X/Y: 0 - 1,200 mm/min Feed rate W-axis: 900 mm/min Feed rate Z-axis: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Operating pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connected load: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Tilting table, 200 mm diameter - Coolant system - Extraction unit - Premium accessories included Transport and loading can be arranged throughout Europe at extra cost, upon request. All prices are subject to VAT. Viewing by appointment only. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality and cost-effective metalworking machine for your production? Or would you like to sell yours? Dedjwtqthepfx Aplocg For further information or contact details, please visit our website.