Stolpna vrtalna naprava

Erlo TCA-45

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Mechanical guillotine shear Make: Petersen Machinery Model: Cidan HSM-F 20/3 Year: 2005 Technical Data Manufacturer: CIDAN Dkedpju Utaijfx Apljl Model: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle: 2° Connection: 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 m Weight: approx. 1.5 t Features • Manual backgauge 750 mm • Continuous hold-down bar with hard rubber strip • Angle gauge • Extendable support table All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 2003, Tehnične podrobnosti: Vrtalna zmogljivost v jeklu (premer): 25 mm Iztegnjenost: 255 mm Vrtalni hod: 140 mm Vreteno MK: MK 3 Hitrost vrtenja vretena: 105 - 2980 / 8 stopenj vrt/min Razdalja vreteno/miza min./maks.: 350 / 950 mm Pritrdilna površina mize: 420 x 270 mm Miza vrtljiva: 360° Miza nagibna pribl.: 30° levo/desno Ročna nastavitev vrtalne mize: 600 mm Dodpfxeu Idhyj Aplekl Premer stebra: 100 mm Napajalna napetost: 400 V / 50 Hz Skupna priključna moč: 0,9 kW Teža stroja pribl.: 180 kg Dimenzije stroja (DxŠxV): 0,6 x 0,5 x 1,8 m Oprema: Röhm hitroprijemalna glava 3 - 16 mm Preklop za desni/levi tek za rezanje navojev

Stanje: rabljeno, Column Drilling Machine Make: IBARMIA Model: A-35 Year of Manufacture: 1980 – workshop tested Machine No.: 1294-C Dodpfew Hxbmex Aplokl Spindle speed: see technical data Accessories: - Automatic feed - Machine lamp - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gearbox steps 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Tapping capacity in steel (ST 60): M 27 Tapping capacity in cast iron (GG 20): M 33 Spindle taper: MK 4 Spindle travel: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Table can be rotated Weight approx. 490 kg Used, sold as seen, without guarantee

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Erlo SEAR 25-RS drilling machine, geared-head drill with automatic feed, equipped with tapping system, spindle speeds 64-3060 rpm, comes with drill chuck and safety guard. Machine in very good condition, year 2006. 2 identical units available. Dkedev Rnhxopfx Aplsl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2007, I-beam - flat 50 x 10 mm I-beam - upright 80 x 15 mm Angle steel 50 mm Round bar material 30.0 mm Raw diameter max. 1 1/2" mm Solid material diameter 30.0 mm Weight 0.185 t Dimensions L-W-H 670 x 530 x 1350 mm Square material 40 x 40 x 3 mm Tubes 60 x 2.0 mm Total power requirement 0.75 kW Demonstration unit Dkedjt U R H Uopfx Apljl Equipment: - Machine stand - Foot switch - Standard rollers (split) - Horizontal and vertical bending possible

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Dksdpfjwpku Dox Aplol Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: dober (rabljeno), Roller width: 2050 mm Sheet thickness at 3 x top roller Ø: 18 mm Sheet thickness at 5 x top roller Ø: 21 mm Dedpfswtpgtox Aplokl Sheet thickness for pre-bending: 12 mm Top roller diameter: 280 mm Side roller diameter: 260 mm Number of rollers: 3 Bending speed: 0-5 Lower roller adjustment: 0-150 mm/min Side roller adjustment: 0-150 mm/min Top support: yes Power: 12 kW Length: 3000 mm Width: 1500 mm Height: 1600 mm Weight: 5200 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S3370, vrsta vhodnega toka: trifazni, CM M1500 straalmachine CM S 3370 Maximale productafmetingen: Maximale producthoogte: 1500 mm, gemeten onder de haak. Maximale diameter: Ø 1200 mm Maximaal gewicht: 700 kg Voorzien van 2x draaghaak. 3x turbine Ø330 mm, 6 bladen 3x turbine 1450 // 950 tpm - 5,7 kW // 4,1 kW Dahlander-motoren Haakverplaatsing handmatig Haakdoorvoer in de machine geautomatiseerd. Deuropening geautomatiseerd. Volledig gereviseerde CM straalinstallatie. Mechanisch en elektrisch volledig gereviseerd en conform specificatie gebracht: Mechanisch: - Motoren & aandrijvingen volledig gedemonteerd en voorzien van nieuwe lagers en nieuwe afdichtingen. - Cabine volledig gereviseerd: plaatwerk en deuren, cabine voorbereid voor mangaanstalen bepantseringsplaten (ophaakijzers voorzien). Cabine standaard geleverd met originele rubberen bekleding, optioneel met mangaanstalen bekleding. - Alle vijzels vervangen en uitgevoerd met HARDOX vijzels. - Alle vijzellagers vervangen. - Abrasief elevator voorzien van nieuwe elevatorband & retourwielen + lagers. - Alle kettingaandrijvingen & tandwielen vervangen. - Haakdoorvoersysteem in machine gemoderniseerd. - Haakaandrijving volledig gereviseerd. - Persluchtaanvoer vervangen. - Persluchtcilinders & ventielen vernieuwd/gereviseerd. - 3x turbine voorzien van nieuwe slijtagedelen en nieuwe turbinewielen Ø330 mm. Elektrisch: - Machine voorzien van 3x turbine Ø330 mm met 2-toerental-regeling (2-toerenmotoren). - Elektromotoren Siemens preventief opnieuw gewikkeld & getest en voorzien van nieuwe lagers. - Elektrische besturing volledig vervangen door SIEMENS S7-1200 besturing & bedieningspaneel. - Schakelkast volledig vervangen met vernieuwde relais, volledig conform 2023-norm. - Uitgerust met 3x SKF servogestuurd straalmiddeltoevoersysteem. De straalmiddeltoevoer kan traploos worden geregeld via het bedieningspaneel voor moeiteloos wisselen tussen beide straalsnelheden. - Uitgerust met Pilz veiligheidssystemen voor turbines en bewegende delen plus noodstopcircuits. Djdpfx Apoxqzmkjlokl De machine is volledig operationeel en direct leverbaar. Machine kan volledig werkend worden getest op onze locatie in Soerendonk (leeg, zonder straalmiddel). 1 jaar garantie op de machine (m.u.v. slijtagedelen) bij verkoop binnen Nederland.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tablirane škarje - mehanske Dkjdpfx Aoydk Acsplel Tip: HSM-F 15/3.0 Št. stroja: 11644-0995 Leto izdelave: 1995 Stanje: dobro, pripravljeno za uporabo TEHNIČNI PODATKI Kapaciteta rezanja: 1.550 x 3,0 mm Kot reza: 2° Število rezov na minuto: 35 Moč motorja: 3 kW z zavoro 380 V/50 Hz Ročni stranski prislon: 0-500 mm Teža: 1.255 kg OPREMA / PRIBOR • Kotni prislon z ravnilom • Dvostranski rezilni nož • Nožno stikalo • Dokumentacija

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting area at 90 degrees - flat: 280 x 200 mm Cutting area at 90 degrees - square: 230 mm Cutting area at 45 degrees - round: 190 mm Cutting area at 45 degrees - flat: 180 x 180 mm Cutting area at 45 degrees - square: 180 mm Cutting area at 60 degrees - round: 120 mm Cutting area at 60 degrees - flat: 110 x 110 mm Dkedpsxz Hhzjfx Aplsl Cutting area at 60 degrees - square: 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Powerful mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut) Description: -Manual cutting cycle -AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring -Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel -Quick-release vice -Carbide blade guides for maximum cutting precision -Large, adjustable cast steel band wheels -Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg) -Clearly arranged control panel with all operating elements -Electric coolant pump for cooling and lubricating the saw blade -Chip removal brush for cleaning the saw blade